DJ Controller MC2000 Owner’s Manual
1. COMPLIANCE INFORMATION Product Name: Professional DJ Controller Model Number: MC2000 CAUTION: This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.
Before use IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT 1. Connections This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. Read these instructions. 2. Keep these instructions. Installing and setting up supplied software 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7.
Specifications VARNINGAR • Hantera nätkabeln varsamt. Håll i kabeln när den kopplas från el-uttaget. • Utsätt inte apparaten för fukt, vatten och damm. • Koppla loss nätkabeln om apparaten inte kommer att användas i lång tid. • Se till att främmande föremål inte tränger in i apparaten. • Se till att inte insektsmedel på spraybruk, bensen och thinner kommer i kontakt med apparatens hölje. • Ta inte isär apparaten och försök inte bygga om den. • Placera inte öppen eld, t.ex. tända ljus, på apparaten.
• DECLARACIÓN DE CONFORMIDAD (English) (Deutsch) • DECLARATION DE CONFORMITE (Français) • DICHIARAZIONE DI CONFORMITÀ (Italiano) • EENVORMIGHEIDSVERKLARING Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das sich diese Erklärung bezieht, den folgenden Standards entspricht: EN55022, EN55024, EN61000-3-2 und EN61000-3-3. Gemäß den Bestimmungen der EMV Richtlinie 2004/108/EG, der Verordnung (EG) Nr.
Before use A NOTE ABOUT RECYCLING: Connections This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning battery disposal.
Before use Before use USB settings···········································································12 Accessories·····················································································2 About this manual·········································································2 Features··························································································2 Cautions on handling·····································································3 Basic operation·
About this manual w r This symbol indicates a reference page on which related information is described. This symbol indicates a supplementary information and tips for operations. NOTE This symbol indicates points to remember operations or function limitations. nnIllustrations Note that the illustrations in these instructions are for explanation purposes and may differ from the actual unit. 2. USB MIDI controller • Equipped with a physical controller function that controls DJ software.
Before use Cautions on handling Connections • About condensation If there is a major difference in temperature between the inside of the unit and the surroundings, condensation (dew) may form on the operating parts inside the unit, causing the unit not to operate properly. If this happens, let the unit sit for an hour or two with the power turned off and wait until there is little difference in temperature before using the unit.
Before use Connections Connecting a microphone/external devices Outputting to an amplifier/powered speakers and recording devices Audio Player Microphone AUDIO OUT L R AUDIO IN R L R L R USB settings Part names and functions nnFor RCA input/output terminals L R Basic operations Select the cables according to the equipment being connected.
nnAutomatic driver installation Connections Installing and setting up supplied software When you connect this unit to a computer for the first time or change USB connections on the computer, a message “Installing device driver software” may appear on the bottom right of the screen. Wait until a message “Your new hardware is installed and ready to use” appears. • For Mac OS, the unit can be used immediately after connecting.
Before use Installing and setting up supplied software the supplied “MC2000 Resource Disc” into license agreement screen appears. If you agree, screen for verifying the folder in which the ASIO 1 Insert 3 The 4 Adriver the computer. select “I accept the terms in the license agreement”. is to be installed appears. 2 Click “Next >”. Click “Asio Driver Installation”. Click “Next >”. The “Next >” can now be selected. Click “Next >”.
To create a shortcut, check the check box and click “Next >”. Installation begins. the following installation completion screen is 7 When displayed, click “Finish”. DENON DJ ASIO for DJ Controller - InstallShield Wizard InstallShield Wizard Completed DENON DJ ASIO for DJ Controller - InstallShield Wizard Ready to Install the Program DENON DJ ASIO for DJ Controller - InstallShield Wizard The wizard is ready to begin installation.
Starting up q Devices (Device list) When the DENON DJ ASIO driver “ASIO Control Panel” is opened from the DJ software or desktop icon, the MC2000 appears in the ASIO Control Panel. About the control panel screen y DENON DJ ASIO for DJ Controller Ver.1.0.0 Devices MC2000 Sampling Rate Device Description • You can select one device at a time. • You can set multiple devices to enable at the same time.
Before use Installing SERATO DJ INTRO Use the following steps to install the DJ software “SERATO DJ INTRO” in the supplied disc. Installation onto a Windows computer Disc 1 Insert computer. Disc 1 Insert computer. “SERATO DJ INTRO” into your The install screen for SERATO DJ INTRO is displayed. 2 Double-click the SERATO DJ INTRO disc icon. Files contained in the SERATO DJ INTRO are displayed for browsing. A window opens and the SERATO DJ INTRO installation starts.
This section describes operations of the unit without using the DJ software. • For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu. • For information about the buttons on the unit for operating the DJ software and their functions, see 17 – 19 pages. Headphone jack Microphone input Turning the power on Connected to this unit and a PC with a USB cable. Top panel lights, and the power switches on.
SHIFT SEL. LOAD A LOAD B Before use Adjusting the sensitivity of the touch sensor Top panel The sensitivity of the touch sensor for the jog wheel can be set in 9 different steps (-4 - 0 - +4). • “–4” is the lowest sensitivity, and “+4” is the highest sensitivity. • The default setting is “0”. Connections this device to the PC using the USB cable, 1 Connect hold down LOAD A, LOAD B and SHIFT together, Installing and setting up supplied software and connect the USB cable.
SHIFT Locking SHIFT Cancelling SHIFT lock • USB 1/2 channel input • USB 3/4 channel input DJ software master DJ software cue monitor Basic operations USB settings MONITOR CUE While SHIFT is locked, hold down SHIFT and press either one of the MONITOR CUE buttons on the left or right of SHIFT. The LOCK LED turns off and SHIFT lock is cancelled. USB AUDIO Input This device is equipped with a sound card function that enables a maximum of 2 channels (stereo, 2 input) of USB AUDIO input.
Before use MIDI command input/output Connections This unit is equipped with a USB MIDI command input/output function. This function enables the unit to control the DJ software in the computer, and lights the main unit display (LEDs). • If SERATO DJ INTRO is used normally, there is no need to switch MIDI command settings or the MIDI channel. Doing so may cause undesired operation or no operation at all.
MIDI command list Items Value 0x57 87 D#6 0x52 0x53 0x55 0x60 0x62 0x63 0x64 0x67 0x69 0x6A 0x6B 82 83 85 96 98 99 100 103 105 106 107 A#5 B5 C#6 C7 D7 D#7 E7 G7 A7 A#7 B7 14 Signal system chart A5 D6 Index 81 86 Specifications 0x51 0x56 SW ON : 0x40 SW OFF : 0x00 Troubleshooting C#-1 E-1 F-1 F#-1 C0 C#0 F#0 G0 A0 B0 C1 C#1 D1 G#1 A1 A#1 B1 C2 F1 E2 F2 C3 C#3 D3 D#3 E3 G3 A3 E4 F4 F#4 G4 Part names and functions 36 37 38 39 40 41 42 43 44 45 46 1 4 5 6 12 13 18 19 21 23 24 25 26 32 33 34
Items MIDI command Command Number 82 49 JOG WHEEL FWD/REV （JW LOCK is Enabled） 0x53 83 0x54 84 0x55 85 0x56 86 0x57 87 0x58 88 0x59 89 0x5A 90 0x5B 91 0x5C 92 0x01 0x02 0x03 0x04 0x05 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x19 0x43 0x44 0xll（LSB) 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 41 67 68 0xll（LSB) 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 TRACK SELECT KNOB
nnReception commands ON TRG : 0x4A OFF TRG : 0x4B Blink ON TRG : 0x4C Troubleshooting ※ n=MIDI CH = 0 ～ 1 Range of MIDI CH2 Part names and functions 0x4A ON TRG: 0x50 OFF TRG: 0x51 2 6 8 9 17 19 21 23 25 27 29 32 35 65 67 69 71 73 38 55 36 64 43 92 93 94 96 97 98 57 69 81 USB settings 0xBn 0x02 0x06 0x08 0x09 0x11 0x13 0x15 0x17 0x19 0x1B 0x1D 0x20 0x23 0x41 0x43 0x45 0x47 0x49 0x26 0x27 0x24 0x40 0x2B 0x5C 0x5D 0x5E 0x60 0x61 0x62 0x39 0x45 0x51 Basic operations SHIFT LOCK VINYL MODE KEY LOCK S
Before use Part names and functions Connections Top panel The top panel is explained for SERATO DJ INTRO. Operations of the top panel only operate the DJ software and do not control audio input/output. For buttons not explained here, see the page indicated in parentheses ( ). Adjusts the effect balance. q w Beats select/Sample volume knob W0 w W1 u W4 i W5 W6 e Effects ON/OFF switch button (1/2/3) Switches the effects ON/OFF.
Q4 Cue button (CUE)········································ (11) Q5 Play/pause button (13) q Plays back when pressed while playback is stopped. Pauses playback when pressed during playback. W0 w W1 y W2 W3 u W4 Q7 Pitch bend adjustment buttons W5 W6 o Q0 W7 Q8 Channel fader knob W8 Q9 Crossfader knob Adjusts the mixing level for each deck. (HI/MID/LOW) Adjusts the input signal frequency response for each channel.
W4 Window switch button (BACK/FWD) Move the cursor. W5 BROWSE 1 button (BROWSE 1) W0 w Not used in SERATO DJ INTRO operation. W6 BROWSE 2 button (BROWSE 2) Not used in SERATO DJ INTRO operation. W1 u W4 i W5 W6 W7 SHIFT button (SHIFT) W8 MONITOR CUE button (MONITOR CUE) The source of the channel selected using MONITOR CUE is mixed with the monitor, and output to the headphones. • Hold down W7 SHIFT and press this button to lock the SHIFT function. The LOCK display lights (SHIFT lock function).
Rear panel For buttons not explained here, see the page indicated in parentheses ( ). Before use Front panel For buttons not explained here, see the page indicated in parentheses ( ). Connections q Theft protection lock hole Connect to an anti-theft wire.
Specifications (0dBu = 0.775 Vrms, 0dBV = 1 Vrms) • LINE inputs 1 Stereo Unbalanced RCA terminal 10 kΩ 0 dBV Over 82 dB 1 Monaural Balanced 1/4 in. TRS terminal (Tip: hot, Ring: cold, Sleeve: ground) 10 kΩ –48 – –20 dBu (Unity = –40 dBu) 2 Stereo (4 Monaural) 16 bit, Fs: 48 kHz USB B Input impedance: Level: Signal to Noise ratio: • Microphone inputs Microphone : Page 5 IN: 1 ch, OUT: 1 ch MIDI 1.
vvC vvH Headphone monitor············································ 10 vvS SERATO DJ INTRO··············································· 9 SHIFT lock function············································· 12 vvT Top panel··················································· 17,18,19 Touch sensor······················································· 11 vvU USB AUDIO························································· 12 USB settings······················································· 12 Part na
Before use Signal system chart Connections Installing and setting up supplied software Basic operations USB settings Part names and functions Index Signal system chart 23 Specifications DA Troubleshooting DA
Connections Installing and setting up supplied software Basic operations 9 29/64 (240.0) Before use nnDimensions Unit: in. (mm) 27/64 (10.6) USB settings Part names and functions 3/16 (4.6) 15 3/4 (400.0) Troubleshooting 29/64 (11.5) Specifications 1 31/32 (50.0) Index Signal system chart Weight: 5 lbs 15 1/4 oz (2.
V00 3520 10165 00AP
