TABLE TOP SINGLE CD/MP3 PLAYER DN-S1000 OPERATING INSTRUCTIONS POWER INSTRUCCIONES DE OPERACION ON TITLE FLIP A1 MEMO CLR A PRESET NEXT TR. /B TRIM A2 B EXIT/ RELOOP QUICK JUMP TIME CONT.
CAUTION SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER 3. (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ENGLISH ESPAÑOL TOP PANEL DIAGRAM DIAGRAMA DEL PANEL SUPERIOR !4 !0 !1 POWER !7 OFF MEMO @2 A1 CLR A NEXT TR. /B TRIM PRESET A2 B EXIT/ RELOOP PARAMETERS PUSH QUICK JUMP CONT.
FRONT PANEL DIAGRAM / VORDERES BEDIENFELD-SCHEMA / SCHEMA DU PANNEAU AVANT / SCHEMA PANNEAU AVANT / DIAGRAMA DEL PANEL FRONTAL / OVERZICHT VAN VOORPANEEL / FRONTPANELEN / 前面板視圖 NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. • Vermeiden Sie hohe Temperaturen.
ENGLISH • DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN610003-3. Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC Directive.
ENGLISH – TABLE OF CONTENTS – z x c v b n m , . ⁄0 Main features .....................................................6 Connections/Installation .....................................7 Part names and functions ..........................8 ~ 10 Compact discs ..................................................10 Basic operation .................................................11 ⁄1 ⁄2 ⁄3 ⁄4 ⁄5 MP3 playback ...................................................16 Platter effect...................................
ENGLISH 2 CONNECTIONS/INSTALLATION (1) CONNECTIONS 1. Turn off the POWER switch. 2. Connect the RCA pin cords between the DN-S1000 outputs and inputs of your mixer. 3. If your mixer has Fader Start function such as our DENON DN-X100 or DN-X300, connect FADER 1, 2 jacks to the mixer using 3.5 mm stereo mini cord. DN-X100 DN-S1000 POWER ON OFF TITLE DN-X100 FLIP A1 MEMO CLR A PRESET NEXT TR. /B TRIM A2 B EXIT/ RELOOP QUICK JUMP TIME CONT.
ENGLISH 3 PART NAMES AND FUNCTIONS (3) Top panel (1) Front panel CAUTION: • Note that there are many buttons working two different function selected by short time pushing or long pushing (1 second or more). The mark indicates short time push function and mark indicates long time push function. q Disc loading slot • Load the disc slowly, and release it once the DN-S1000 starts grabbing the disc in. NOTE: Please clean the dirt of the label side of a disc and start loading of the disc.
ENGLISH !8 DISC MODE button Select from Scratch playback, Bend mode or Manual Frame Search mode. • SCRATCH: This button lights up or blinks in orange when scratching. Manipulate the sound by pushing down on the disc, move it and then release it. • BEND/SEARCH: When the Disc mode is set to BEND during playback, it alternates as the pitch bend function. The display will indicate “Bend”. When Disc mode is set to Search, during Pause or CUE mode, it alternates as the Manual Search function.
ENGLISH i Character display (4) Display q w e r BPM TITLE • You can select the mode or function using PARAMETERS knob following the short message which is displayed on the character display area. • The character display indicates the operation, mode name, data, etc., and displays such guide messages as “Push/Play” means if “YES”, push PARAMETERS knob. The display indicates and marks sometime, note that mark says you to turn PARAMETERS knob and marks says to push PARAMETERS knob.
ENGLISH 5 BASIC OPERATION Play and pause • Each push of the y PLAY/PAUSE (13) button switches between playback and pause. y PLAY/PAUSE (13) button illuminates solid green during playback and flashed in pause. • When the y PLAY/PAUSE (13) button is pushed during play, the DN-S1000 pauses playback at that point. Push y PLAY/PAUSE (13) button once again and playback resumes. • Playback will pause when SCRATCH is selected with the !8 DISC MODE button and the scratch disc is held with your hand.
ENGLISH 6 NEXT TRACK • It’s now possible to select the beginning of the next track to be played while continuing playback of the current track without interrupting playback. *Crossfade can also be used for a smooth transition. q w FLIP 1 A1 CLR A2 B EXIT/ RELOOP A Enter Next Track mode NEXT TR. q When the NEXT TR./B TRIM /B TRIM button is pushed during playback, the NEXT TRACK function is turned on. • When this mode is set, CUE button blink.
ENGLISH 8 SEAMLESS LOOP/HOT START/STUTTER Stutter • A1 and A2 points can be also used for Stutter playback. Seamless Loop/Hot Start/Stutter (A1, A2 buttons) Operation display (refer to the section describing the display) POWER ON 6 q, w, y e, y t, y r OFF TITLE FLIP A1 MEMO CLR A PRESET NEXT TR. /B TRIM A2 Clear the A1/A2 point B y While pressing the FLIP/(CLR) button, push the A1 or A2 button to clear the corresponding A and B points. EXIT/ RELOOP QUICK JUMP TIME CONT.
ENGLISH 9 B TRIM 10 AUTO BPM COUNTER / EFFECTOR • The Seamless Loop B points can be fine-adjusted using the Scratch Disc. • Trim the points during loop playback as a rehearsal. AUTO BPM COUNTER r e POWER ON q w, r POWER ON OFF TITLE FLIP A1 MEMO CLR A PRESET NEXT TR. /B TRIM A2 B EXIT/ RELOOP QUICK JUMP TIME OFF TITLE FLIP A1 MEMO CLR A PRESET NEXT TR. /B TRIM A2 B CONT. /SINGLE FAST SEARCH EXIT/ RELOOP TAP QUICK JUMP q, w, e, t TIME CONT.
ENGLISH EFFECTOR FILTER ECHO/LOOP OFF One of the seven effects can be selected. *1 *3 *5 POWER *2 *4 *6 ON r When the ECHO/LOOP button is pressed, the echo/loop parameter 1-5 selection mode is set. IF the ECHO/LOOP button is pressed again, the echo/loop function is turned off. w, e, y, u, !0, !1 FILTER ON ECHO /LOOP o When the FILTER button is pressed, the filter function is turned on and the parameter 3-1 selection mode is set. FILTER OFF TITLE FLIP A1 MEMO CLR A PRESET NEXT TR.
ENGLISH 11 MP3 PLAYBACK Select the file The DN-S1000 can playback MP3 files via CD-R/RW media made according to the following conditions. * MP3 disc’s made by formats other than below settings cannot be played back on our system. * In most cases, you can find the below settings within the properties of your burners PC software. Please refer to your manual or contact your software vendor for assistance regarding these settings.
ENGLISH 12 PLATTER EFFECT DRAG-S BRAKE mode off TITLE FLIP A1 MEMO CLR A PRESET NEXT TR. /B TRIM A2 B EXIT/ RELOOP QUICK JUMP TIME CONT. /SINGLE FAST SEARCH ECHO /LOOP TAP AUTO TRACK SEARCH MP3 SEARCH MODE w, u e When the BRAKE buttons is pressed, the BRAKE time selection mode is 1-5 set. If the BRAKE button is pressed again during this time, the BRAKE functions is turned off. DRAG-S (DRAG START): Simulates the dragging sound of a turntable starting up from a stop mode.
ENGLISH 13 MEMO (Custom Setting Memory) CD setting information can be stored in the non-volatile memory. The stored information can be called out of the memory at later time, making it easy to prepare for your mixing. *MP3 MEMO point saving is not available. 1. About MEMO • Up to 1000 memo points can be stored to internal memory for later recall. The number of tracks on a particular CD only limits the amount of memo points available per that disc.
ENGLISH 14 PRESET 1. Preset mode q The preset mode is available when !7 PRESET button is pushed for more than 1 sec while DN-S1000 is in Cue, pause or no disc mode. w Turn the @3 PARAMETERS knob to select the preset item. e After selecting an item, push the @3 PARAMETERS knob to select the preset data. r To change other Preset items, repeat these steps. t Push the !7 PRESET, i CUE or y PLAY / PAUSE (13) button to exit from the Preset mode. (16) Preset Int.
ENGLISH 15 SPECIFICATIONS GENERAL Type: Disc type: Dimensions: Installation: Mass: Power supply: Power consumption: Environmental conditions: AUDIO SECTION Main out, Monitor out Quantization: Sampling frequency: Oversampling rate: Total harmonic distortion: Signal to noise ratio: Channel separation: Frequency response: Analog output Output level: Load impedance: Digital output Signal format: Output level: FUNCTIONS Instant start: Variable pitch: Pitch bend: Search precision: Max. scan speed: Max.
ESPAÑOL 2 CONEXIONES/INSTALACIÓN (1) CONEXIONES 1. Desconecte el interruptor POWER. 2. Conecte el haz de cables RCA entre las salidas del DN-S1000 y las entradas de su mixer. 3. Si su mixer posee la función Fader Start, como nuestros modelos DENON DN-X100 o DN-X300, conecte las clavijas de FADER 1 y 2 al mixer utilizando un minicable estéreo de 3,5mm. DN-X100 DN-S1000 POWER ON OFF TITLE DN-X100 FLIP A1 MEMO CLR A PRESET NEXT TR. /B TRIM A2 B EXIT/ RELOOP QUICK JUMP TIME CONT.
ESPAÑOL 3 NOMBRES DE LOS COMPONENTES Y FUNCIONES (3) Panel superior (1) Panel frontal PRECAUCIÓN: • Tenga en cuenta que hay mucho botones con dos funciones diferentes dependiendo de si pulsan durante más o menos tiempo (1 segundo o más). La marca indica una función de tiempo corto, mientras que la marca indica una función de pulsado de tiempo largo. q Ranura para la carga de discos • Cargue el disco lentamente y suéltelo cuando el DN-S1000 empiece a agarrarlo.
ESPAÑOL !7 Botón MEMO, PRESET • MEMO: El modo memo se activa cuando se pulsa este botón mientras se esta en modo Cue. • PRESET: Cuando se pulsa este botón durante más de 1 segundo, se muestra el menú de modos PRESET (prefijados). El estado del equipo deberá estar en el modo de entrada (CUE), pausa (PAUSE) o sin disco (No Disc) antes de entrar en el modo predeterminado.
ESPAÑOL (4) Display q w e r BPM TITLE: El indicador TITLE aparecerá en la pantalla cuando la unidad esté en el modo de búsqueda de nombre de título (TITLE). ARTIST: El indicador ARTIST aparecerá en la pantalla cuando la unidad esté en el modo de búsqueda del nombre de artista (ARTIST). i Visualizador de caracteres TITLE t y u i q Visualizadores de pista, minuto, segundo y cuadro (frames) • Estos visualizadores indican la información de posición actual.
ESPAÑOL 5 OPERACIONES BÁSICAS Reproducción y Pausa • Cada vez que pulse el botón y PLAY/PAUSE (13) se cambia entre modo de reproducción y de pausa. El botón y PLAY/PAUSE (13) se ilumina en color verde durante la reproducción y parpadea durante la pausa. • Cuando pulse el botón y PLAY/PAUSE (13) durante la reproducción, el DN-S1000 realizará una pausa en la reproducción en ese punto. Pulse de nueve el botón y PLAY/PAUSE (13 ) y se reiniciará la reproducción.
ESPAÑOL 6 PISTA SIGUIENTE • Es posible seleccionar que se reproduzca el inicio de la pista siguiente mientras se sigue reproduciendo la pista actual sin interrumpirla. *La atenuación cruzada también puede utilizarse para una transición continua. q w FLIP A1 CLR A 1 A2 B EXIT/ RELOOP PARAMETERS PUSH NEXT TR. /B TRIM QUICK JUMP Pasar al modo Next Track q Al pulsar el botón NEXT NEXT TR. /B TRIM TR./B TRIM durante la reproducción, la función NEXT TRACK se activará.
ESPAÑOL 8 SEAMLESS LOOP/HOT START/STUTTER Stutter • Loa puntos A1 y A2 también pueden usarse para la reproducción Stutter. Seamless Loop/Hot Start/Stutter (Botones A1, A2) Visualización del funcionamiento (remítase a la sección de descripción de la visualización) q, w, y e, y t, y POWER ON 6 r t Para permitir una reproducción repetida, pulse el botón FLIP en los botones A1/A2; la pantalla “ ” se apagará. Pulse el botón FLIP para alternar entre los modos Hot Start/Seamless Loop y Stutter.
ESPAÑOL 9 B TRIM 10 CONTADOR/EFECTOR DE BPM AUTOMÁTICO • Los puntos B de bucle continuo pueden ajustarse de manera precisa mediante el disco de rayado. • Ajuste los puntos durante la reproducción en bucle a modo de prueba. CONTADOR BPM AUTOMÁTICO r e q w, r POWER ON OFF TITLE POWER ON OFF FLIP A1 MEMO CLR A PRESET NEXT TR. /B TRIM A2 B EXIT/ RELOOP TITLE FLIP A1 MEMO CLR A PRESET NEXT TR. /B TRIM A2 B QUICK JUMP TIME EXIT/ RELOOP CONT.
ESPAÑOL ECHO/LOOP OFF EFECTOR *1 *3 *5 POWER *2 *4 *6 ON FILTER r Cuando se pulsa el botón ECHO/LOOP, se activará el 1-5 modo de selección del parámetro eco/bucle. Si se vuelve a pulsar el botón ECHO/LOOP, la función de eco/bucle se desactivará. Puede seleccionarse uno de los seis efectores. w, e, y, u, !0, !1 3-1 OFF TITLE FLIP A1 MEMO CLR A PRESET NEXT TR.
ESPAÑOL 11 REPRODUCCIÓN MP3 Seleccione el archivo La DN-S1000 puede reproducir archivos MP3 a través de CD-R/RW, diseñados de acuerdo a las siguientes condiciones. * El disco MP3 con distinto formato a los ajustes especificados a continuación no se puede reproducir en nuestro sistema. * En la mayoría de casos puede encontrar los ajustes que se detallan a continuación en las propiedades del software de las grabadoras de su PC.
ESPAÑOL 12 PLATTER EFFECT RVS DRAG-S DRAG-S (DRAG START) Seleccionar el modo RVS TITLE FLIP A1 MEMO CLR A PRESET NEXT TR. /B TRIM A2 B 2-1 r La función RVS puede activarse pulsando el botón RVS. EXIT/ RELOOP QUICK JUMP RVS 3-1 TIME CONT. /SINGLE FAST SEARCH AUTO TRACK SEARCH MP3 SEARCH MODE ECHO /LOOP TAP w, u ★3 Cada pulsación del botón 13 cambia entre reproducción inversa y reproducción normal.
ESPAÑOL 13 MEMO (Memoria de ajuste personalizado) La información de configuración del CD puede almacenarse en memoria no volátil. La información almacenada podrá extraerse de la memoria más adelante, facilitando así la preparación de su mezcla. 1. Sobre MEMO • Un máximo de 1000 puntos de notas recordatorias se pueden almacenar en la memoria interna para recordarlas después. El número de pistas en un CD en particular solo limita la cantidad de puntos de notas recordatorias disponibles para ese disco.
ESPAÑOL 14 PRESET 1. Preset mode q El modo preset está disponible cuando se pulsa el botón !7 PRESET durante más de 1 segundo si DNS1000 está en modo Cue, pausa o sin disco. w Gire el botón @3 PARAMETERS para seleccionar el elemento preestablecido. e Después de seleccionar el elemento, pulse el botón @3 PARAMETERS para seleccionar los datos preset. r Para cambiar los datos Preset, repita los siguientes pasos. t Pulse el botón !7 PRESET, i CUE o y PLAY/PAUSE (13) para cancelar el modo preset. 2.
ESPAÑOL 15 ESPECIFICATIONES GENERALIDADES Tipo: Tipo de discos: Dimensiones: Instalación: Peso: Alimentación: Consumo: Condiciones ambientales: SECCION DE AUDIO Main out, Monitor out Cuantificación: Frecuencia de muestreo: Relación de sobremuestreo: Distorsión de armónicos total: Señal a ratio de ruido: Separación de canales: Frequency respons: Salida analógica Nivel de salida: Impedancia de carga: Salida digital Formato de señal: Nivel de salida: Reproductor de disco compacto.
PROFESSIONAL BUSINESS COMPANY 7-35-1 Sagamiono, Sagamihara-shi, Kanagawa 228-8505, JAPAN Printed in Japan 511 4193 002