User Manual

22
Appendix (English)
Technical Specifications
Any differences between Axis 8 and Axis 12 are noted below.
Specifications are subject to change without notice.
Power System
2000 W peak, 1000 W continuous
Class D; 500 W LF + 500 W HF with DSP
Frequency Response 45 Hz – 20 KHz (Axis 12)
55 Hz – 20 KHz (Axis 8)
Maximum SPL 128 dB (from driver sensitivity and amp power) (Axis 12)
125 dB (from driver sensitivity and amp power) (Axis 8)
Coverage
90° conical
Transducer Low 12” (304mm) woofer, 2.5” (64mm) voice coil (Axis 12)
8” (203mm) woofer, 2” (51mm) voice coil (Axis 8)
Transducer High
1” (25mm) exit compression Celestion driver
1.75” (44mm) voice coil
Active Crossover
at 1.85 KHz with 24 dB filter slope
Connections Input 1: XLR+1/4” (6.35mm) TRS combination input with
line/mic selector
Input 2: XLR+1/4” (6.35mm) TRS combination input or
1 RCA stereo input pair
Thru Output: XLR
Power: IEC power cable input
Input Level
Line 0 dBu
External Controls
Volume control, power switch with LED, signal/clip limiter with LED
Digital EQ Presets
Flat, Boost
Electronic Protections
Thermal, convection fan, overload, digital limiter, compressor
Enclosure
Trapezoidal plywood cabinet, top and bottom high-strength ABS,
black paint, metal grille
Mounting
1 standard 36mm pole mount; 1 plastic handle
Power Connection: Standard IEC cable
Input Voltage: 110–120, 220–240 V AC; 50/60 Hz
Inrush Current: 10.09 A
Consumption: 800 W
Fuse: 110–120 V: T10AL AC250V or 220-240 V: T5AL AC250V
Dimensions
(width x depth x height)
15.3” x 14.4” x 16.3” / 38.8 cm x 36.5 cm x 41.4 cm (Axis 12)
14.0” x 12.5” x 13.4” / 35.6 cm x 31.7 cm x 34.0 cm (Axis 8)
Weight 36.5 lbs. / 16.6 kg (Axis 12)
29.0 lbs. / 13.1 kg (Axis 8)