User's Manual

28
Source
The Source menu allows you to select a connected media device for use
with PRIME 2. All connected media sources will be shown on the
touchscreen.
Tap the device name to select it as your media source. The currently
selected source device, if any, will show Source next to its name. The
currently select recording device, if any, will show Rec next to its name.
Tap the computer icon at the top of the touchscreen to switch PRIME 2 to
computer mode. In computer mode, you can use PRIME 2 to send and
receive MIDI messages to and from your computer.
Tap the Wi-Fi icon at the top of the touchscreen to open the Wi-Fi
connection menu. In this menu, you can view information about
available networks and select one to connect to. You can also disable
Wi-Fi from within this menu by tapping the icon again.
Tap the X to exit the Source menu.
Record
Select the media device destination that you will use to save your
recording. The currently selected source device will show Source next to
its name. Once you have selected the recording device, you can begin
recording your session.
Tap Start to begin recording. The timer on the touchscreen will show the
total length of time recorded.
Tap Pause to pause recording.
Tap Resume to resume recording when paused. PRIME 2 will continue
recording your session from where you pressed pause.
Tap Stop to stop recording. Once recording is stopped, you will have the
option of saving the file to your device.
Tap Clear to clear the recording. A warning screen will be shown before
the file is deleted. Tap Yes to continue, or No to return to the previous
page to save the recording.
Tap Save As to save it to your drive. A keyboard will appear where you can
title your file. Tap Done to finish and save your file, or tap Cancel to
return to the previous page. A success message will be shown on the
touchscreen when the operation is complete. Tap OK to continue, or
wait a few seconds and you will be returned to the Record menu.
Recorded files will be saved in a folder called Sessions on your media
device. You can access these recordings from your PRIME 2 under the
Files section of the Library.
Tap the back arrow (<) to move back a page or return to the previous
page.
Tap the X to exit the Record menu.