DN-200BR User Guide English ( 3 – 12 ) Guía del usuario Español ( 13 – 22 ) Guide d’utilisation Français ( 23 – 32 ) Guida per l’uso Benutzerhandbuch Appendix Italiano ( 33 – 42 ) Deutsch ( 43 – 52 ) English ( 53 – 58 )
User Guide (English) Introduction ® DN-200BR is a Bluetooth audio receiver with professional-grade audio outputs. It lets you add wireless stereo Bluetooth audio reception to any professional audio system. Once you pair your Bluetooth device to DN-200BR, you can send your device’s audio signal out DN-200BR’s balanced XLR or unbalanced 1/4” (6.35 mm) outputs to your mixer, loudspeakers, or amplification system.
Features 5.8” (149mm) OUTPUT 6 2 5 4 3 BAL. UNBAL. 1 8 UNBAL. 7 7 1.8” (45mm) 8 1. Power Input: Use the included power adapter to connect this input to a power outlet. See Setup for more information. 2. BNC Antenna Terminal: Connect the included removable Bluetooth antenna to this BNC connector. The antenna receives and transmits the Bluetooth signal from a paired Bluetooth device. DN-200BR has a range of up to 82 feet (25 meters). 3.
5. Status Light: This LED indicates the DN-200BR’s Bluetooth pairing status: • Flashing slowly (approximately twice every 2 seconds): DN200BR is not paired to a Bluetooth device. • Flashing quickly (approximately twice per second): DN-200BR can be paired to a Bluetooth device. • Solidly lit: DN-200BR is paired to a Bluetooth device. See Operation to learn how to pair/unpair a Bluetooth device to/from DN-200BR. 6.
Setup Items not listed under Introduction > Box Contents are sold separately. 1. Use either XLR cables or 1/4” (6.35mm) cables to connect the DN200BR’s outputs (balanced or unbalanced) to your loudspeakers, mixer, amplifier, or other device that accepts line-level inputs (this device must be powered off). Important: For stereo operation, make sure all left (L) and right (R) outputs are connected to left and right inputs, respectively. 2.
Example PA loudspeakers Loudspeakers Mixer OUTPUT BAL. UNBAL. UNBAL. Power Smartphone, tablet, etc.
Operation You can play audio from an audio device that sends its signal over a Bluetooth connection (e.g., smartphones, tablet computers, etc.). DN200BR uses Bluetooth CSR 4.0 and has a range of up to 82 feet (25 meters). Once you “pair” your Bluetooth device with DN-200BR, they are “connected” wirelessly. You can play audio on your Bluetooth device, and it will be sent out of DN-200BR’s outputs (balanced and unbalanced). Important: • DN-200BR will not receive audio from a phone call.
To pair your Bluetooth device to DN-200BR: 1. If DN-200BR is off, use the included power adapter to connect its power input to your power source. The Status Light will flash slowly. 2. Make sure your desired Bluetooth device has its Bluetooth connectivity on and is within range. DN-200BR will automatically try to pair with the last-paired Bluetooth device, if any. If you are using that Bluetooth device again, you can start playing audio immediately.
5. On your Bluetooth device, start playing audio. To adjust your volume level, we recommend setting the volume control of each of your devices in the following order: i. your Bluetooth device ii. DN-200BR, using its Level Knob iii. your mixer, if any (its input channel level[s], then its main output level) iv. your loudspeakers Set each volume level as high as possible without creating distortion or any “clipping” of the sound. Important: DN-200BR will not receive audio from a phone call.
Troubleshooting If you encounter a problem, try doing these things first: • Make sure all cables and other connected devices are properly and securely connected. • Make sure you are using DN-200BR as described in this User Guide. • Make sure your other devices or media are working properly. • If you believe DN-200BR is not working properly, check the following table for your problem and solution. Problem: Solution: Please see: Power does not turn on.
Problem: Solution: Please see: Audio from my Bluetooth device does not play through DN-200BR. Make sure you have properly paired your Bluetooth device. Setup and Operation Pairing my Bluetooth device to DN-200BR requires a PIN. 12 Improve the Bluetooth signal reception by moving your Bluetooth device closer to DN-200BR. Also, remove obstacles (walls, furniture, etc.) so there is a clear line of sight between your Bluetooth device and DN-200BR. Enter 0000 as the PIN.
Appendix (English) Technical Specifications All values are measured with a 1 KHz audio signal with Level knob at “unity” position. Specifications are subject to change without notice. Bluetooth range is affected by walls, obstructions, and movement. For optimal performance, place the product in the center of the room so it is unobstructed by walls, furniture, etc. Frequency Response 20 Hz – 20 KHz (+1 dBu) Signal-to-Noise Ratio > 75 dB THD < 0.
Bluetooth Version Specifications Maximum Receiver Power 54 CSR 4.0 Class 2, 4 dBm Receiver Frequency 2.4 GHz – 2.480 GHz Receiver Range Up to 82 ft. / 25 m Receiver Sensitivity -80 dBm @ 0.1% BER Supported Profiles AVCTP 1.0 AVRCP 1.0 GAVDP 1.2 AVDTP 1.0 A2DP 1.2 Hands-Free Profile (HFP) 1.5 Headset Profile (HSP) 1.
Operation Temperature 41–95°F / 5–35°C Power Power Adapter: 5 V DC, 2 A, center-positive Input Voltage: 100–240 V AC, 50/60 Hz Dimensions 5.8” x 4.6” x 1.8” 149 x 117 x 45 mm (width x depth x height) Weight 1.3 lbs. 0.6 kg Trademarks and Licenses Denon is a trademark of D&M Holdings Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Denon Professional is under license.
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Warnings This device complies with Industry Canada’s licence-exempt RSSs Operation is subject to the following two conditions: (1) This device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
denonpro.com Manual Version 1.
Front Back DN-200BR Stereo Bluetooth Audio Receiver With countless Bluetooth-enabled audio sources roaming the planet, the DN-200BR interfaces them all with a professional audio system for sound reinforcement, special event or retail applications. It receives Bluetooth signals wirelessly, then routes the audio to balanced XLR or ¼-inch outputs for integration with mixers and amplification systems. Its Bluetooth Pairing mode ensures a secure connection.
DENON PROFESSIONAL Important Safety Instructions & Warranty Information English (3-14) lnstrucciones importantes de seguridad e informaci6n de la garantra Espanol (15-23) Instructions importantes de securite et informations de garantie Franc;ais (24- 32) lstruzioni importanti di sicurezza e le informazioni della garanzia Wichtige Sicherheitsanweisungen und Garantieinformationen Italiano (33-41) Deutsch (42-50)
Denon is a trademark of D&M Holdings Inc., registered in the U.S. and other countries. Denon Professional products are produced by inMusic Brands, Inc., Cumberland, RI 02864 U.S.A. NEMA• is the registered trademark and service mark of the National Electrical Manufacturers Association. All other product names, company names, trademarks, or trade names are those of their respective owners.
DENON Product Warranty (for products purchased in the U.S.A.) PROFESSIONAL 1. What is covered and for how long? All Products: inMusic Brands, Inc.
product, and the seller's name and address. To obtain an AMA number and assistance on where to return the product, contact Denon Pro customer service at 401-658-5766. Upon receipt, Denon Pro will repair or replace the defective products. Denon Pro may, at Denon Pro's sole option, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable product.
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS. This Limited Warranty allocates risk of product failure between purchaser and Denon Pro, and Denon Pro's product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty.
DENON PROFESSIONAL Product Warranty (for products purchased outside of the U.S.A.) 1. inMusic Brands, Inc. ("inMusic") warrants to the original purchaser that Denon Professional ("Denon Pro") products are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized Denon Pro dealer and continuing for the following period of time after that date for (1) Year. 2.
BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO INMUSIC'S OR DENON PRO'S OWN NEGLIGENCE, EVEN IF INMUSIC, DENON PRO, OR ITS AGENTS HAVE BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR DENON PRO'S PRODUCTS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY.
Return Information • A return merchant authorization number must be obtained from your local Denon Pro representative. For your representative go to denonpro.com. • A copy of the original sales receipt must also be included for the equipment to be repaired under warranty. • The faulty equipment must be packed in its original packaging. • One additional outer layer of packaging must be included to ensure product safety.
• • • • • • Avoid amplifier "clipping" at all costs: this occurs when the red LEDs (usually on the front panel of most professional power amplifiers) start flashing. "Clipping" is when the power amplifier is distorting and working beyond its limits. Amplifier distortion is the main cause of speaker failure. To prevent fire or shock hazard, do not expose the unit to rain or moisture.
12. Power Sources (if applicable): This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit. 13. Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself. 14.
Service Instructions • Disconnect power cord before servicing. • Replace critical components • For AC line powered units: Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades to all exposed metal parts. The resistance should be more than 2,000,000 ohms. & only with factory parts or recommended equivalents. Safety Notices CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER- SERVICEABLE PARTS INSIDE.
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Wireless Microphone (if applicable): This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. For wireless products supporting the SG frequency band (if applicable): Usage of the 5.15-5.25 GHz band are restricted to indoor operation only. This applies to the following countries: AT, BE, BG, CZ, DK, EE, FR, DE, IS, IE, IT, EL, ES, CY, LV, LI, LT, LU, HU, MT, NL, NO, PL, PT, RO, SI, SK, TR, Fl, SE, CH, UK, HR.
Disposal of Batteries (if applicable): • Never dispose of any types of batteries in fire or near excessive heat or direct sunlight. Overheated batteries can rupture or explode. • If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc. • Alkaline batteries & lithium button cell batteries: You can safely dispose of alkaline and lithium button cell batteries with normal household waste.
World Headquarters U.K. Office Germany Office inMusic Brands, Inc. 200 Scenic View Drive Cumberland, RI 02864 USA inMusic Europe, Ltd. Unit 3, Nexus Park Lysons Avenue Ash Vale HAMPSHIRE GU12 5QE UNITED KINGDOM inMusic GmbH Harkortstr. 12 - 32 40880 Ratingen GERMANY Tel: 401 -658-5766 Fax:401-658-3640 Tel: 02102 7402 20150 Fax: 02102 7402 20011 Tel: 01252 896 040 Fax: 01252 896 021 denonpro.com - 7-51-1337-G NF04826-1 .
