DVD SURROUND RECEIVER ADV-1000 OPERATING INSTRUCTIONS MODE D’EMPLOI CH 1 ON POWER 2 3 VCR CH 4 OFF VCR POWER 5 CH 8 9 TV/VCR SLEEP 7 CLEAR TV POWER CH TV 0 +10 CALL DISPLAY 6 VOL RETURN INPUT MODE SURROUND MENU FUNCTION ENTER MODE VOLUME BAND MUTE CH SHIFT NTSC/PAL STATUS TU MEMO SUB TITLE AUDIO PROG/DIRECT REPEAT A-B TOP MENU ANGLE REPEAT RANDOM SDB/TONE SURR.PARA DVD SURROUND RECEIVER ADV-1000 FUNCTION / SELECT PROGRESSIVE SCAN MASTER VOLUME CH.
SAFETY PRECAUTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and use instructions should be followed.
ENGLISH 2 INTRODUCTION Thank you for choosing the DENON ADV-1000 DVD Surround Receiver. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding.
ENGLISH 3 CAUTIONS ON HANDLING • Switching the input function when input jacks are not connected A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks. If this happens, either turn down the MASTER VOLUME control or connect components to the input jacks. • Whenever the power switch is in the STANDBY state, the apparatus is still connected on AC line voltage. Please be sure to unplug the cord when you leave home for, say, a vacation.
ENGLISH 5 DISCS • The types of discs listed on the table below can be used on the ADV-1000. The marks are indicated on the disc labels or jackets.
ENGLISH 6 CAUTIONS ON HANDLING DISCS Discs Cautions on Handling Discs Only the discs including the marks shown on page 6 can be played on the ADV-1000. Note, however, that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played on the ADV-1000. Do not attempt to play such discs, as they may damage the player. Holding Discs • Do not get fingerprints, grease or dirt on discs. • Be especially careful not to scratch discs when removing them from their cases.
ENGLISH 7 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). • Insert the plugs securely. Incomplete connections will result in the generation of noise. • Note that binding pin plug cords together with AC cords or placing them near a power transformer will result in generating hum or other noise.
ENGLISH (2) Connecting video components • To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can result in a drop in video quality. • When making connections, also refer to the operating instructions of the other components. Connecting a TV/DBS tuner TV/DBS • Connect the TV’s or DBS tuner’s video output jack (VIDEO OUTPUT) to the VIDEO (yellow) TV/DBS IN jack using a 75 Ω/ohms video coaxial pin plug cord.
ENGLISH (3) Connecting a video component equipped with S-Video jacks • When making connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each other.
ENGLISH (4) Connecting the antenna terminals DIRECTION OF BROADCASTING STATION AM LOOP ANTENNA (Supplied) FM INDOOR ANTENNA (Supplied) FM ANTENNA 75 Ω/ohms COAXIAL CABLE LOOP ANT. VIDEO OUT MON.OUT CR IN TV/DBS IN V.AUX IN OUT VCR FM COAX. 75 L AM R IN OUT CDR/ TAPE IN TV/DBS IN V.AUX IN OUT VCR AUDIO IN TV/DBS IN V.AUX DIGITAL(OPTICAL) AM OUTDOOR ANTENNA OUT FM ANTENNA ADAPTER (Option) GROUND • An F-type FM antenna cable plug can be connected directly.
ENGLISH (5) Connecting to a TV or Monitor Equipped with Component Input Connectors. • When making connections, also refer to the operating instructions of the other components. • The video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks. Color component output connectors (PR/CR, PB/CB and Y) The red (PR/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful reproduction of the colors.
ENGLISH (6) Sound output from this unit digital audio output connectors 2 When a disc is played on the ADV-1000 Settings Audio recording format Refer to page Digital audio data output Dolby Digital bitstream Digital out : Normal Dolby Digital 2 channels PCM data (48 kHz/16bit) Digital out : PCM conversion 79 Digital out : Normal DTS bitstream Digital out : PCM conversion DTS bitstream LPCM conversion mode : OFF 48 kHz/16 ~24 bit PCM LPCM conversion mode : ON 48 kHz/16 bit PCM DTS DVD video DVD
ENGLISH (7) Speaker system connections • Use speaker cords with twisted wire cores and a diameter of 0.6 to 1.5 mm. Never use cords thicker than 1.5 mm or single-wire cords, as they may damage the speaker terminals. • Be sure to interconnect the polarities of the terminals on the speakers and main unit (≈ to ≈, √ to √). • When making connections, be careful that none of the core wires of the speaker cords stick out and touch neighboring terminals, other speaker cords or the rear panel.
ENGLISH Protector circuit • This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short-circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit is used at high output over a long period which results in an extreme temperature rise.
ENGLISH 8 PART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). !9 !8 !7 DVD SURROUND RECEIVER ADV-1000 FUNCTION / SELECT MASTER VOLUME C 8 1:02:46 PROGRESSIVE SCAN ON / STANDBY PHONES AUTO DECODE 5CH STEREO OPEN / CLOSE q we r t q Power operation switch (ON/STANDBY)..................................(31) w Headphones jack (PHONES) ....................................................
ENGLISH Remote control unit • For details on the functions of these parts, refer to the pages given in parentheses ( ). • Some of the buttons on the remote control unit have two functions. The functions are switched using the remote control mode selector buttons (CDR/MD/TAPE, TUNER/TV/VCR and DVD). After one of these buttons is pressed, the function will not switch until another remote control mode selector button is pressed.
ENGLISH 9 REMOTE CONTROL UNIT • The included remote control unit (RC-912) can be used to operate not only this unit but other remote control compatible DENON components as well. In addition, the memory contains the control signals for other remote control units, so it can be used to operate non-Denon remote control compatible products. (1) Inserting the batteries q Remove the remote control unit’s rear cover. w Set three R6P/AA batteries in the battery compartment in the indicated direction.
ENGLISH (3) Preset memory [1] Audio Component • The signals of your other Denon products can be stored in the included remote control unit’s preset memory to operate either the CDR, MD or TAPE function. Operation is not possible for some models.
ENGLISH [3] VCR • Other makes of components can be operated by setting the preset memory for your make of video component. This remote control unit can be used to operate components of other manufacturers without using the learning function by registering the manufacturer of the components as shown on the List of Preset Codes (attached sheet). Operation is not possible for some models.
TV POWER ENGLISH 1 (5) Operating a video component stored in the preset memory b. For tape deck (TAPE) Before operating the remote control unit! Be sure to press the proper remote control mode selector button to set the remote control unit to the AV mode.
ENGLISH 10 SETTING UP THE SYSTEM (1) System setup items POWER • Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 8 to 15), make the various settings described below on the monitor screen using the ADV-1000’s on-screen display function. VCR POWER • Use the following buttons to set up the system: TV POWER DISPLAY RETURN INPUT MODE SURROUND MENU ENTER ENTER button Press this to switch the display. Also use this button to complete the setting.
ENGLISH • Speaker system layout Basic system layout • The following is an example of the basic layout for a system consisting of six speaker systems and a television monitor: Subwoofer Front speaker systems Set these at the sides of the TV or screen with their front surfaces as flush with the front of the screen as possible.
ENGLISH (2) Before setting up the system • This section describes surround-related setup operations. For DVD-related setup operations, see page 73. • The setup operations cannot be performed while discs are playing. Set the stop mode first. 1 2 2 Refer to “CONNECTIONS” (pages 8 to 15) and check that all connections are correct. Turn on the power. Press the POWER switch (button).
ENGLISH (3) Quick system settings (to switch between the 2- and 5.1-channel modes) • The ADV-1000 is preset with Quick System settings for a 5.1-channel surround system using five small speakers. See “(4) System setting changes” (pages 26 to 30 when using speaker systems other than the ones described below or if you wish to change the settings. 1 2 At the setup screen, select “QUICK SETUP”, then press the ENTER button. (See page 24.
ENGLISH (4) System setting changes • The quick system settings and factory default settings are changed at the system setting change menu. • The settings are stored in the memory until they are next changed, even when the power is turned off. [1] Setting the type of speakers • The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used.
ENGLISH Subwoofer (SW FREQ.) frequency • For the subwoofer frequency at the speaker setting screen, set the bass crossover frequency for playback from the subwoofer. • Select “80 Hz”, “120 Hz”, “150 Hz” or “180 Hz” (-6 dB for each). Bass sound below these frequencies is played from the subwoofer. (This is set to “80 Hz” by factory default.
ENGLISH [2] Setting the speaker distance • Input the distances from the listening position to the speakers and set the surround delay time. • The default settings below are set upon shipment from the factory. Preparations: Measure the distances from the listening position to the speakers (L1 to L3 on the diagram at the right).
ENGLISH [3] Setting the channel level • Use this setting to adjust so that the playback level between the different channels is equal. • From the listening position, listen to the test tones produced from the speakers to adjust the level. • The level can also be adjusted directly from the remote control unit. (For details, see page 40.
ENGLISH [4] Setting the DVD auto power off • The ADV-1000 is equipped with a function that automatically switches the power to standby if no operation is performed for 30 minutes while in the stop mode with the function set to DVD. Here, set whether to turn this function on or off. • The factory default setting is “NO”.
ENGLISH 11 PLAY BACK 1 2 (1) Before Operating Refer to “CONNECTIONS” (pages 8 to 15) and check that all connections are correct. Turn on the power. Press the POWER button. ON / STANDBY Light (green) ON POWER 2 Main unit CH 2 ON POWER OFF VCR POWER CLEAR TV POWER CALL 1 2 3 5 6 VCR CH 4 CH VOL 7 CH +10 8 9 TV/VCR SLEEP TV 0 Remote control unit When pressed, the power turns on and the display lights.
ENGLISH (3) Playback IMPORTANT SETUP INFORMATION This set has the following presettings: “DISC SETUP”, “OSD SETUP”, “VIDEO SETUP”, “AUDIO SETUP”, “RATINGS”, and “OTHER SETUP”. These presettings have been preset upon shipment from the factory. If you wish to change them to suit your specific purposes, refer to pages 73 to 83. Before operating the remote control unit! • Be sure to set the DVD mode using the remote control mode selector buttons.
ENGLISH 6 Use the cursor buttons ( , , and ) to select the desired item. • For some discs there is a second menu screen. If so, press the 9 button to display the next menu screen. (See the disc’s jacket.) 7 The cursor buttons ( , , and ) do not work for video CDs. Use the number buttons to select the desired item. Press the ENTER button. • The desired item is selected and playback starts.
ENGLISH POWER VCR POWER TV POWER MENU Before operating the remote control unit! • Be sure to set the DVD mode using the remote control mode selector buttons. FUNCTION DVD ENTER MODE VOLUME BAND (7)-1 (6)-1,(9)-1 MUTE CH MEMO TU SUB TITLE ANGLE AUDIO PROG/DIRECT REPEAT A-B CH.SELECT SETUP (8)-1 SHIFT NTSC/PAL STATUS T.TONE TOP MENU REPEAT RANDOM SDB/TONE SURR.
ENGLISH POWER 12 OPERATION VCR POWER TV POWER CH 1, 3 5 2 SLEEP TV/VCR 0 +10 CALL DISPLAY RETURN INPUT MODE SURROUND MENU 3 1 FUNCTION ENTER 5 MODE VOLUME BAND 3 MUTE CH SHIFT NTSC/PAL STATUS Input mode setting 1 Either turn the FUNCTION/SELECT knob on the main unit or press the FUNCTION button on the remote control unit to select the input function to be played.
ENGLISH 4 5 Start playback on the selected component. • For operating instructions, refer to the component’s manual. Either turn the MASTER VOLUME dial on the main unit or use the VOLUME buttons on the remote control unit to adjust the volume. The volume level is displayed on the display. M.VOLUME -20 MASTER VOLUME Input mode display Lit DIG AUTO PCM DTS ANA • In the AUTO mode One of these lights, depending on the input signal.
ENGLISH POWER VCR POWER TV POWER After starting playback [1] Adjusting the sound quality (SDB / TONE) The SDB/TONE function will not work in the direct mode. [2] Turning the sound off temporarily (MUTING) 2 1 MODE VOLUME POWER BAND 1 VCR POWER MUTE CH SHIFT NTSC/PAL STATUS TU MEMO TV POWER SUB TITLE AUDIO PROG/DIRECT REPEAT A-B 2 2 ENTER CH.SELECT SETUP MODE T.TONE ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.
ENGLISH 13 DOLBY / DTS SURROUND Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Dolby Surround (1) Dolby Digital (Dolby Surround AC-3) Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolby Digital consists of up to “5.
ENGLISH 2 Sources recorded in Dolby Surround are indicated with the logo mark shown below. Dolby Surround support mark: Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. DTS Digital Surround Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems. DTS offers the same “5.
ENGLISH 14 SURROUND PLAYBACK (1) Before playing with the surround function • Adjustments using the test tones can only be performed in the “Auto” mode and are only valid for the Auto decode Surround modes. The adjusted levels are automatically stored in the memory. • Even after adjusting using the test tones, the various channels can be adjusted using the procedure described below to suit the program source and your preferences.
ENGLISH [1] 2-channel mode settings In the auto decode mode, it is possible to automatically conduct multi-channel playback in the Dolby Digital or DTS surround mode or play in the stereo 2-channel mode (AUTO STEREO mode: factory default setting). For 2-channel input signals, one of four play modes can be set with the 2-channel mode setting (Auto Stereo, Dolby Pro-Logic II Cinema, Dolby Pro-Logic II Music and Dolby Pro-Logic).
ENGLISH Surround parameters (1) (2-channel mode) AUTO-ST (auto stereo) mode 2-channel sources are played in 2-channel stereo. When this mode is selected in the auto decode mode, multi-channel sources (DVD, BS digital, etc.) are played in the multi-channel mode, while 2-channel sources (CDs, etc.) are automatically played in stereo. PLII CINEMA / PLII MUSI / PRO LOGIC mode Even 2-channel sources undergo Dolby Pro Logic II processing and are played in the multi-channel mode.
ENGLISH [2] Setting the parameters in the PLII CINEMA, PLII MUSIC and PRO LOGIC modes • When PLII CINEMA, PLII MUSIC or PRO LOGIC is selected in the 2-channel mode, more detailed parameters can also be set for the different modes. PLII MUSIC mode: Use the procedure described below to make the settings. PLII CINEMA and PRO LOGIC modes: Refer to step 6 on pages 44 and 45. • Program sources marked in parentheses processing and played in the multi-channel mode. and 2-channel sources (CDs, etc.
ENGLISH (3) Playing in the AUTO DECODE mode • In the auto decode mode it is possible to play in the Dolby Digital or DTS Surround mode, depending on the format of the input signal. • It is also possible to play in the Auto Stereo, Dolby Pro-Logic II Cinema/Music or Dolby Pro-Logic mode, according to the 2-channel mode setting. [1] Dolby Digital and DTS surround playback (digital inputs only) • Applicable sources • Digital inputs (TV/DBS and V.
ENGLISH • LFE level setting Surround parameters (2) LFE ... -10 0dB ... 0 -5 , / The LFE level can be adjusted between –10 dB and 0 dB in steps of 1 dB. • DEFAULT setting DEFAULT YES , Y/N NO / When “YES” is selected, the settings are reset to their factory default values. D.COMP. (Dynamic Range Compression): • This parameter adjusts the dynamic range of the Dolby Digital sound.
ENGLISH [2] Playing in the Dolby Pro-Logic II mode .............................................................................................................(All function) • Playback is performed according to the 2-channel mode and PLII CINEMA, PLII MUSIC and PRO LOGIC mode parameter settings. • Applicable sources • Digital inputs (TV/DBS and V.
ENGLISH [3] Playing in the auto stereo mode ......................................................................(DVD, TV/DBS and V.AUX functions only) • For the DVD, TV/DBS and V.AUX functions, when the 2-channel mode is set to the auto stereo mode, 2-channel sources are played in 2-channel stereo. • Applicable sources • Digital inputs (TV/DBS and V.
ENGLISH 15 DSP SURROUND SIMULATION (1) Surround modes and their features • This unit is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of 7 preset surround modes can be selected according to the program source and the parameters can be adjusted according to the conditions in the listening room to achieve a more realistic, powerful sound.
ENGLISH (2) DSP Surround simulation 3 1, 2 4 2 MONO MOVIE ROCK ARENA JAZZ CLUB VIDEO GAME CH 1 ON POWER 2 3 5 6 VCR CH 4 OFF VCR POWER CH VOL 8 9 TV/VCR SLEEP 7 CLEAR TV POWER CH RETURN INPUT MODE SURROUND MENU Remote control unit MATRIX VIRTUAL ROOM SIZE DELAY EFFECT EFFECT DEFAULT DEFAULT 2 1 FUNCTION 5 SURR.PARA TV 0 +10 CALL DISPLAY To enter the surround parameter setting mode, press the SURROUND mode.
ENGLISH 5 • DEFAULT setting Surround parameters (3) DEFAULT Y/N Y/N YES , NO / When “YES” is selected, the settings are reset to their factory default values. Stop operating buttons once the surround parameter settings have been completed. After several seconds the normal display reappears and the settings are automatically set.
ENGLISH 2 Surround modes and parameters Signals and adjustability in the different modes Input function playing signals and Surround mode TV/DBS V.AUX DVD Channel output When playing Dolby Digital signals When playing DTS signals TV/DBS V.
ENGLISH 16 LISTENING TO THE RADIO (1) Auto tuner presets Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels 1 to 40. NOTE: • If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it using the manual “Preset memory” operation. 1 Using the TUNER function, press and hold the TUNING + and TUNING – buttons of the main unit for 2 seconds or longer.
ENGLISH POWER VCR POWER TV POWER (3) Presetting FM and AM stations Example: Presetting FM station (currently tuned in) at preset number P03 ENTER 2 MODE VOLUME BAND 2 MUTE MEMO TU SUB TITLE ANGLE AUDIO PROG/DIRECT REPEAT A-B CH.SELECT SETUP 2 SHIFT NTSC/PAL STATUS CH T.TONE TOP MENU REPEAT RANDOM SDB/TONE SURR.PARA CDR/MD/TAPE TUNER/TV/VCR Each press of the shift button adds 10 to the current preset number in the range of P01 to P40.
ENGLISH 17 ON-SCREEN DISPLAY • The ADV-1000 is equipped with an on-screen display (“OSD”) function that displays various types of information on the surround functions and the disc on the screen when the function is set to DVD. q Setup screen • This is used to select the speaker system being used (quick system setting) and to change the function of the ADV-1000 and various settings when playing discs (system setting change and DVD setting change).
ENGLISH 18 USING THE ON-SCREEN DISPLAY CH (1) Operating using the disc information OSD ON POWER OFF VCR POWER CLEAR 2 Use this function to display and change information on the disc (titles, chapters, time, etc.) TV POWER CALL DISPLAY 1 1 2 3 5 6 Before operating the remote control unit! • Be sure to set the DVD mode using the remote control mode selector DVD buttons.
ENGLISH (2) Adjusting the picture quality POWER • The quality of the picture when playing discs can be adjusted. VCR POWER TV POWER CALL 1 DISPLAY CH TV/VCR +10 SLEEP 0 RETURN INPUT MODE SURROUND MENU FUNCTION 1, 2, 3 4 1, 2, 3, 4 ENTER MODE VOLUME 1 2 3 56 When playing a disc with the function set to DVD, press the DISPLAY button to turn on the on-screen display, use the and cursor buttons to select “Picture Quality”, then press the ENTER button.
ENGLISH • The black level can be selected for both interlace and progressive images. BLACK LEVEL (factory default: “LIGHTER”): Select “LIGHTER” or “DARKER” for the picture’s black level. LIGHTER (factory default): Increases the standard level of the black level. Set this to make the picture bright overall. DARKER: This is the standard level. Normally set this. 4 Use the and cursor buttons to adjust, then press the ENTER button. • The item selected at step 3 is displayed and can be adjusted.
POWER ENGLISH VCR POWER TV POWER (3) Playing Repeatedly 2 Use this function to play your favourite audio or video sections repeatedly. MODE VOLUME BAND MUTE SHIFT NTSC/PAL STATUS CH MEMO TU SUB TITLE AUDIO PROG/DIRECT REPEAT A-B [2] -1,2 CH.SELECT SETUP T.TONE ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.PARA CDR/MD/TAPE TUNER/TV/VCR REMOCON MODE [1] -1 DVD Before operating the remote control unit! • Be sure to set the DVD mode using DVD the remote control mode selector buttons.
ENGLISH [2] Playing a Certain Section Repeatedly (A-B Repeat Playback) 1 During playback, press the A-B REPEAT button. • This sets start point A. REPEAT A-B A TO B SET A Remote control unit 2 Press the A-B REPEAT button again. • This sets end point B, and repeat playback of the A-B section starts. REPEAT A-B A TO B SET B Remote control unit To return to normal playback: Press the A-B REPEAT button until “A TO B CANCELED” appears on the TV screen.
ENGLISH (4) Playing Tracks in the Desired Order 2 Use this function with video and music CDs to play the tracks in the desired order. 2 This function does not affect with DVD. CH 1 ON POWER 6 CH CH 8 9 TV/VCR SLEEP TV 0 +10 CALL DISPLAY 2 VOL 7 CLEAR TV POWER DVD 3 5 VCR 4 OFF VCR POWER Before operating the remote control unit! • Be sure to set the DVD mode using the remote control mode selector buttons.
ENGLISH (5) Playing Tracks in the Random Order 2 Use this function with video and music CDs to play the tracks in random order. 2 This function does not affect with DVD. POWER VCR POWER 8 9 TV/VCR SLEEP 7 CLEAR TV POWER CH DISPLAY RETURN INPUT MODE SURROUND MENU Before operating the remote control unit! • Be sure to set the DVD mode using the remote control mode selector buttons.
ENGLISH (6) MP3 Playback 2 There are many music distribution sites on the internet from which music files in MP3 format can be downloaded. Music downloaded as instructed on the site and written onto a CD-R/RW disc can be played on the ADV-1000. If music recorded on commercially available music CDs is converted on a computer into MP3 files using an MP3 encoder (conversion software), the data on a 12 cm CD is reduced into about 1/10 the amount of the original data.
ENGLISH 3 Use the and cursor buttons to select the MP3 file you want to play, then press the PLAY (1) button or ENTER button. • Playback starts. The display can be switched between the single elapsed time and the single remaining time by pressing the DISPLAY button. Programmed playback is not possible with MP3 discs. To change the MP3 file Press the STOP button, then use the and \ Main unit Remote control unit Remote control unit \ ENTER cursor buttons to reselect the desired MP3 file.
ENGLISH (7) Using the Multiple Audio, Subtitle and Angle Functions POWER [1] Switching the Audio Language (Multiple Audio Function) 2 With DVDs containing multiple audio language signals, the audio language can be switched during playback. VCR POWER TV POWER MENU FUNCTION 2 ENTER MODE VOLUME BAND MUTE CH SHIFT NTSC/PAL STATUS MEMO TU SUB TITLE 1 1 AUDIO PROG/DIRECT REPEAT A-B CH.
ENGLISH POWER [2] Switching the Subtitle Language (Multiple Subtitle Function) 2 With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback. VCR POWER TV POWER MENU FUNCTION 2 ENTER MODE VOLUME BAND MUTE SHIFT NTSC/PAL STATUS CH MEMO TU SUB TITLE 1 1 AUDIO PROG/DIRECT REPEAT A-B CH.SELECT Before operating the remote control unit! • Be sure to set the DVD mode using DVD the remote control mode selector buttons. T.
ENGLISH [3] Switching the Angle (Multiple Angle Function) 2 With DVDs containing multiple angle signals, the angle can be switched during playback. CH 1 ON POWER 2 3 VCR CH 4 OFF VCR POWER 5 CH 8 9 TV/VCR SLEEP 7 CLEAR TV POWER CH DISPLAY TV 0 +10 CALL 6 VOL RETURN INPUT MODE SURROUND MENU Before operating the remote control unit! • Be sure to set the DVD mode using the remote control mode selector buttons.
ENGLISH (8) Using the Menus [1] Using the Top Menu 2 For DVDs containing multiple titles, the desired title can be selected and played from the top menu. CH 1 ON POWER 2 3 5 6 VCR CH 4 OFF VCR POWER CH CH 9 SLEEP TV 0 +10 CALL DISPLAY 2 VOL 8 TV/VCR 7 CLEAR TV POWER RETURN INPUT MODE SURROUND MENU FUNCTION 2 3 ENTER Before operating the remote control unit! • Be sure to set the DVD mode using the remote control mode selector buttons.
ENGLISH [2] Using the DVD Menu 2 Some DVDs include special menus called DVD menus. For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain audio and subtitle language menus. These menus are called “DVD menus”. Here we describe the general procedure for using DVD menus.
ENGLISH 19 USING THE TIMER (1) Setting the current time (12-hour display) Example: To set the current time to “7:30 p.m.” 4,6 4 Turn FUNCTION/SELECT dial to set the hours’ place to “PM7”. • The “PM7” flashes in the hours’ place. Adj. 1 1 PM7:00 FUNCTION / SELECT 2,3,5,7 Main unit Turn on the power. 5 ON / STANDBY Green Press the TIMER/SET button. • The “PM7” in the hours’ place stops flashing, remaining lit, and the minutes’ place starts flashing. TIMER/SET Adj.
ENGLISH (2) Everyday timer Description of timer • The timer can be used to switch the power between the ON and STANDBY (OFF) modes once every day at the same time. (Everyday timer) • The timer can be used to play DVDs, CDs or TUNER. (3) Setting the Everyday timer Example: To listen to a CD from 12:35 p.m. to 12:56 p.m. 4,6,8,10,12,14 Before setting the timer • Set the current time. Be careful to set the right time.
ENGLISH 6 Setting the timer start time Set the hours’ place to “PM12”. On FUNCTION / SELECT 14 PM12:00 Set the timer standby mode to on or off. • “ON” or “OFF” (the one that has been selected) flashes. Select “ON” if you want the timer to operate. (When set to “ON”, the mark appears on the display.) FUNCTION / SELECT Main unit T.StdbyON OFF 7 Press the TIMER/SET button. On 8 TIMER/SET • The “PM12” in the hours’ place is stored in the memory. PM12:00 Set the minutes’ place to “35”.
ENGLISH (4) Setting the sleep timer (remote control unit only) • The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. (Sleep timer) • Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes). Example: To set the power to the standby mode in 50 minutesaccording to the clock. Be sure to correct the current time setting. 1 Select and play the desired function. 2 Press the SLEEP button.
ENGLISH POWER VCR POWER 20 CHANGING THE DEFAULT SETTINGS (DVD) TV POWER 2 The initial setting that was set prior to shipping from the factory can be changed. The setting contents are maintained until they are next changed even when the power is switched off. MENU FUNCTION 1,2 ENTER 1,2 MODE VOLUME BAND MUTE SHIFT NTSC/PAL STATUS CH MEMO TU SUB TITLE AUDIO PROG/DIRECT REPEAT A-B CH.SELECT SETUP T.TONE In the stop mode, press the SETUP button.
ENGLISH POWER VCR POWER (1) “DISC SETUP” is selected TV POWER MENU FUNCTION 2,3,4 ENTER 2,3,4 MODE VOLUME BAND MUTE SHIFT NTSC/PAL STATUS CH MEMO TU SUB TITLE AUDIO PROG/DIRECT REPEAT A-B CH.SELECT SETUP 1 T.TONE ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.PARA CDR/MD/TAPE TUNER/TV/VCR DVD REMOCON MODE 1 Read page 73. 2 3 Use the and cursor buttons to select the desired setting, then press the ENTER button.
ENGLISH 4 To exit the dialog mode Press the ENTER button, you can go back to the previous screen. 2 When “SUBTITLE” is selected: • ENGLISH Select this when you want to play the DVD with the subtitles in English. • FRENCH Select this when you want to play the DVD with the subtitles in French. • SPANISH Select this when you want to play the DVD with the subtitles in Spanish. • GERMAN Select this when you want to play the DVD with the subtitles in German.
ENGLISH POWER VCR POWER (2) “OSD SETUP” is selected TV POWER MENU FUNCTION 2,3,4 ENTER 2,3,4 MODE VOLUME BAND MUTE SHIFT NTSC/PAL STATUS CH MEMO TU SUB TITLE AUDIO PROG/DIRECT REPEAT A-B CH.SELECT SETUP 1 T.TONE ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.PARA CDR/MD/TAPE TUNER/TV/VCR DVD REMOCON MODE 1 Read page 73. 2 3 Use the and cursor buttons to select the desired setting, then press the ENTER button.
ENGLISH POWER VCR POWER (3) “VIDEO SETUP” is selected TV POWER MENU FUNCTION 2,3,4 ENTER 2,3,4 MODE VOLUME BAND MUTE SHIFT NTSC/PAL STATUS CH MEMO TU SUB TITLE AUDIO PROG/DIRECT REPEAT A-B CH.SELECT SETUP 1 T.TONE ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.PARA CDR/MD/TAPE TUNER/TV/VCR DVD REMOCON MODE 1 See page 73. 2 3 Use the and cursor buttons to select the desired setting, then press the ENTER button. • TV ASPECT Use this to set the shape of your TV’s screen.
ENGLISH 4 2 When “TV TYPE” is selected: • MULTI Select this when your TV is compatible with both the NTSC and PAL formats. NTSC signals are output from the video output jacks when discs recorded in NTSC format are played, and PAL signals are output from the video output jacks when discs recorded in PAL format are played. • NTSC (Factory default) Select this when your TV’s video format is NTSC. If NTSC is selected, output format is fixed to NTSC. • PAL Select this when your TV’s video format is PAL.
ENGLISH POWER VCR POWER (4) “AUDIO SETUP” is selected TV POWER DISPLAY RETURN INPUT MODE SURROUND MENU FUNCTION 2,3,4 ENTER 2,3,4 MODE VOLUME BAND MUTE SHIFT NTSC/PAL STATUS CH MEMO TU SUB TITLE AUDIO PROG/DIRECT REPEAT A-B CH.SELECT SETUP 1 T.TONE ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.PARA CDR/MD/TAPE TUNER/TV/VCR DVD REMOCON MODE 1 See page 73. 2 3 Use the and cursor buttons to select the desired setting, then press the ENTER button.
ENGLISH 4 2 “LPCM SELECT (96 kHz / 48 kHz)” is selected. • OFF (Factory default) Make the selection when playing back to a decoder DVDs that were recorded with this unit using linear PCM 48 kHz/20/24 bit and 96 kHz modes. Note that DVDs with Copyright Protection are converted to 48 kHz/16 bits and played back. The same signal is output from the digital output jacks. • ON (96 kHz Æ 48 kHz) DVDs that were recorded with linear PCM 48 kHz/20/24 bit and 96 kHz modes are all converted to 48 kHz/16 bits.
TV POWER ENGLISH (5) “RATINGS” is selected VOLUME BAND CH ON POWER OFF VCR POWER CLEAR TV POWER CALL DISPLAY 1 2 3 5 6 4 MUTE CH 4 VOL 8 9 TV/VCR SLEEP 7 CH MEMO TU SUB TITLE AUDIO ANGLE TOP MENU TV PROG/DIRECT REPEAT A-B 0 +10 SHIFT NTSC/PAL STATUS CH VCR CH REPEAT RANDOM SDB/TONE SURR.PARA RETURN INPUT MODE SURROUND CH.SELECT MENU T.TONE FUNCTION SETUP CDR/MD/TAPE TUNER/TV/VCR 1 2,3,4 DVD REMOCON MODE ENTER 2,3,4 MODE 1 2 3 See page 73.
ENGLISH 4 Use the number buttons to input a 4-digit password, then press the ENTER button. Be sure to set the DVD mode using the remote control mode selector buttons. The set's password is set to “0000" by default. Do not forget the password. The setting cannot be changed without inputting the correct password.
ENGLISH POWER VCR POWER (6) “OTHER SETUP” is selected TV POWER DISPLAY RETURN INPUT MODE SURROUND MENU NOTES: • An English caption decoder is required to display English captions. FUNCTION 2,3,4 ENTER 2,3,4 MODE VOLUME BAND MUTE SHIFT NTSC/PAL STATUS CH MEMO TU SUB TITLE AUDIO PROG/DIRECT REPEAT A-B CH.SELECT SETUP 1 1 2 3 T.TONE ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.PARA CDR/MD/TAPE TUNER/TV/VCR • DVDs with caption signals are indicated by the , mark.
ENGLISH 21 LAST FUNCTION MEMORY • This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the power is switched off. This function eliminates the need to perform complicated resettings when the power is switched on. • The unit is also equipped with a back-up memory. This function provides memory storage when the power switch is off and with the power cord disconnected.
ENGLISH 23 TROUBLESHOOTING Check again before assuming the player is malfunctioning 2 Are all the connections correct ? 2 Are you following the instructions in the manual ? 2 Are the speakers and other components operating properly ? If this unit does not seem to be functioning properly, check the table below. If this does not solve the problem, this unit may be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon sales office.
ENGLISH DVD operation Symptom Page Playback does not start when PLAY button is pressed. Playback stops immediately. • Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.) • Discs other than DVDs, video CDs and music CDs cannot be played. • Disc is dirty. Wipe off the dirt. — 6 7 Menu playback of video CD’s is not possible. • Menu playback is not possible with anything but video CDs with playback control. — Picture is disturbed during the search operation.
ENGLISH 24 SPECIFICATIONS 2 2 2 2 2 2 2 Audio section • Power amplifier Output power: Output terminals: • Analog Input sensitivity / input impedance: Frequency response: S/N: Rated output: • Digital Digital input / output: Video section • Standard video jacks Input / output level and impedance: • S-video jacks Input / output level and impedance: Front: 43 W + 43 W (6 55 W + 55 W (6 Center: 43 W (6 55 W (6 Surround: 43 W + 43 W (6 55 W + 55 W (6 Subwooferr: 30 W (6 43 W (6 55 W (6 Front, Center, S
16-11, YUSHIMA 3-CHOME, BUNKYOU-KU, TOKYO 113-0034, JAPAN Telephone: (03) 3837-5321 Printed in China 511 3922 009