Manual

• When making connections, also refer to the operating instructions of the other components.
• A note on the S input jacks
The input selectors for the S inputs and pin jack inputs work in conjunction with each other.
• Precaution when using S-jacks
This unit's S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video signals input from
the S-jacks are only output from the S-jack outputs and video signals input from the pin iacks are only output from the pin jack outputs.
When connecting this unit with equipment that is equipped with S jacks, keep the above point in mind and make connections according to the
equipment's instruction manuals.
I Connecting a monitor TV ]
MONITOR OUT
• Connect the TV's S video input (S-VIDEO
INPUT} to the _ MONITOR OUT
jack using a S iack connection cord¸
[Connecting a TV/DBS tuner 1
• Connect the TV's or DBS tuner's
S video output jack (S-VIDEO
OUTPUT) to the
TV/DBS IN iack using an S jack
connection cord
Connecting a CS tuner 1
• Connect the CS tuner's S video output
jack (S-VIDEO OUTPUT) to the
kLAUX IN iack using an S jack connection
cord¸
Connect the components' audio inputs
and outputs as described on page 9
[ Connecting the video decks]
• Connect the video deck's S output iack (S-OUT) to the
VCR IN iack and the video deck's S input jack (S-
IN) to the _ VCR OUT jack using Siack connection
cords
CS tuner
TV or DBS tuner [_ _--o_
[_o O oo _
m
Video deck
sv,,soos S Ol
NOTES:
• Connect this unit video outputs to the TV either directly. Do • Set the "TV TYPE" in "VIDEO SETUP" in "DVD SETUP" to
not connect it via a VCR (video cassette recorder). Some comply with your TV's video format. When the TV is NTSC
discs contain copy prohibit signals. If such discs are played formated set to NTSC.
via a VCR, the copy prohibit system may cause disturbance
in the picture.
10