Manual

• The ADV-1000 is preset with Quick System settings for a 5.1-channel surround system using five small speakers.
'_ See "(4) System setting changes" {pages 26 to 30 when using speaker systems other than the ones described below or if you wish to change
the settings
At the setup screen, select "QUICK SETUP", then press the
ENTER button. (See page 24)
Use the A and V cursor
buttons to select "Room Space",
then use the { and ) cursor
buttons to set the size of the room.
• The set size is displayed in yellow
Remote control unit
I E00MSIrACE:I14X_4ft) I
O
Use the _, and Vcursor
buttons to select "Seating
Position", then use the { and
) cursor buttons to set
the position
• The set position is displayed m
yellow
Remote control unit
>* >" ! ! ! ! ! ! ! ! ! ! ! _,:*i
DENON
I_1_00iM_'A_{14XI4ftF I
0
_BW t_j
Press the SETUP button to quit the
setup mode.
-_ You can also quit the setup mode
by using the V cursor button
at the setup screen to display
"Quit setup" in yellow then
pressing the ENTER button.
SETJp
Remote control unit
To change the settings
At the setup screen, select "SYSTEM SETUP" from
"<ADVANCED SETUP>"
About the quick system settings
ROOM SPACE:
Set the size of the room in which you are using the product.
SMALL: 10ftx10ft(3.0mx3.0m)
MED.: 14 ft x 14 ft (4.2 m x 4.2 m)
LARGE: 20ftx20ft(6.0mx6.0m)
SEATING POSITION:
Set whether the seating position is near the center of the room
or towards the back
CENTER
BACK
Settings:
When "ROOM SPACE" or "SEATING POSITION" is selected,
the distance from the listening position to the different
speakers is displayed automatically.
If the relative distance is very different from the actual distance
(for example if a shorter distance is displayed for the front
speakers than for the center speaker but actually the opposite
is true), set the distance as described in "ADVANCED SETUP"
(page 26)
Press the ENTER button to enter the
setting.
• The setup screen reappears
Remote control unit
25