Manual

[4] Setting the DVD auto power off

• The ADVq000 is equipped with a function that automatically

switches the power to standby if no operation is performed for 30

minutes while in the stop mode with the function set to DVD. Here,

set whether to turn this function on or off

• The factory default setting is "NO"

To perform these operations from places other than the

system setting change menu, see page 26

At the "SYSTEM SETUP MENU".screen, select "DVD AUTO

POWRE OFF" and press the ENTER button

[5] After completing system setup

• Once the speaker settings, delay time setting and channel level

adjustments are made, there is no need to reset them unless the AV

components or speakers ere changed or the speakers are moved to

different positions

• Change the DVD auto power off settings as necessary

At the SYSTEM SETUP MENU, press

the SETUP button.

• The changed settings are entered and

the on-screen display turns off.

SETUP

Remote control unit

This button can be pressed at any time during the system

setup process to complete the process.

Remote control unit Remote control unit

• Switch to the "DVD AUTO POWER OFF.screen.

NOTE:

If the quick system settings are selected after setting up the

system using the system setting change menu, the speaker and I

delay time settings are changed to the values preset for the quick

system settings.

_¢4¢4¢4¢4\%_\1_

DENON

Ii!ii!i iI;![}_i_!!i!_U!NI_ITi[i_i_ii_{_i_¸_i il

Select "YES" or "NO".

• YES: The auto power off function is active when the

function is set to DVD.

• NO: The auto power off function does not work

Enter the setting

• The SYSTEM SETUP MENU reappears

Remote cor/trol unit