Manual

[] SURROUND PLAYBACK

• Adjustments using the test tones can only be performed in the

"Auto" mode and are only valid for the Auto decode Surround

modes The adjusted levels are automatically stored in the memory.

• Even after adjusting using the test tones, the various channels can

be adjusted using the procedure described below to suit the

program source and your preferences

2-- --2

boo©

Press the TEST TONE button.

TTONE

Remote control unit

Test tones are output from the different speakers Use the

channel volume adjust buttons to adjust so that the volume of

the test tones is the same for all the speakers.

• The channel to be adjusted can be changed using the

CH.SELECT button and the ( { and ) ) cursor buttons on

the remote control unit during the adjustments using the

test tones.

2-- --2

®®,®,0

1-1/

Select the speaker whose level you want to adjust.

• The channel switches as shown below each time the

button is pressed.

CH.SELECT

Remote control unit

Adjust the volume level of the selected speaker while the

channel level is displayed.

Remote control unit

After adjusting using the test tones, adjust the channel levels

either according to the playback sources or to suit your tastes,

as described below.

TTONE

Remote control unit