Manual

[] USING THE TIMER
Example: To set the current time to "7:30 pro"
1
4,6
_ 0 00000 o
2,3,5,7
Turn on the power
ON / STANDBY
Main unit
Press the TIMER/SET button and hold it in for at least 2
seconds
T]MEPdSET
• "SET TIME" is displayed
_Z'Lt:"'T' "T" T i_'iL::"
Main unit
If the time is already set, "EVERYDAY" is displayed. Turn
the FUNCTION/SELECT dial to display "SET TIME", then
continue on to step 3
Press the TIMER/SET button
• "Adj" is displayed and the hours' place in the time display
flashes
TIMEPdSET
Main unit
Turn FUNCTION/SELECT dial to set the hours' place to
"PMT'
• The "PMT' flashes in the hours' place.
;Zi ,,J ; _117'i',_':'t_5_ ;:'t1!D
I I I_ " -
FUNCTION
/S£L£CT
O
Main unit
Press the TIMER/SET button
• The "PMT' in the hours' place stops flashing, remaining lit,
and the minutes' place starts flashing.
TIMEPdSET
Main unit
Turn the FUNCTION/SELECT dial and set the minutes' place
to "30".
• The "30" flashes in the minutes' place
FUNCTION
I
Main unit
l Press the TIMER/SET button to start the clock running
• The time is set and the clock starts counting the time
TIMEPdSET
dd6 _ d_6
Main unit
To check the current time when something else is displayed, press
the TIMER/SET button once. The current time appears and
remains displayed until another operation is performed
,_ When the TIMER/SET button is pressed again while the time is
displayed, after which the normal display reappears
The time can be displayed by pressing the TIMER/SET button
while the power is in the standby mode (The power is now no
longer in the energy-saving standby mode.) When the TIMER/SET
button is pressed again while the time is displayed, after which the
display turns off and the power is set back to the energy-saving
standby mode.
69