Manual

7
8
Setting the timer start time
Set the hours' place to "PM12"
]'-]i"" _C'_i_'J i ":_ _J !T:1!t:I
I I I
FUNCTION
/SELECT
Main unit
Press the TIMER/SET button T]MEPdSET
• The "PM12" in the hours' place is
stored in the memory.
i li"" _"_'_._--,::'b_:-' Main unit
Set the minutes' place to "35"
I ,,i _". , ............ /i.J ,i._
FUNCTION
/SELECT
Main unit
4 Set the timer standby mode to on or off
• "ON" or "OFF" (the one that has been selected) flashes.
Select "ON" if you want the timer to operate. {When set
to "ON", the _ mark appears on the display.)
s IT
I ' g:'4,, ,.JL,-,_('_i,,1 "1 !-UZ'i:7'
FUNCTION
/SELECT
O
Main unit
"_ Select ON/OFE If an operation is not performed within 4
seconds, the setting will be made automatically and there
will be a return to the normal display (Operation 15 is not
necessary.)
5 Press the TIMER/SET button TIMEPdSET
• This completes the setting of the
timer
Main unit
Press the TIMER/SET button
• The start time is stored in the memory, and the end time
can now be set.
TIMEPdSET
E i _ I_
Main unit
10
Setting the timer end time FUNCTION
Set the hours' place to "PM12" /SELECT
i I !I _ .,).
Main unit
1 Press the TIMER/SET button
• The "PM12" in the hours' place is stored in the memory.
T]MEPdSET
Main unit
2 Set the minutes' place to "56"
FUNCTION
/SELECT
O
I _::;'f"f" ' ............_'i"
Main unit
3 Press the TIMER/SET button TIMEPdS£T
• The end time is stored in the
memory
• "T.Stdby" is displayed and the _.
timer can now be turned on or off. Main unit
Turn off the main unit's power ON/STANDBY
• The power is set to the standby Orange
mode.
• If the timer standby mode is set to
"ON", the power LED is lit orange.
• The disc starts playing when the
\
timer start time is reached Main unit
When the disp]ay's _ mark is lit or the power LED is lit orange
when the power is in the standby mode, the timer will operate at
the same times every day {Everyday timer)
,_ if you do not want the timer to operate, press the TIMER/SET
button to display "T.Stdby" and set to "OFF".
(The display's (_ mark turns off.)
if you make a mistake when setting the timer, with steps 5 to 12
press the TIMER/SET button and hold it in for at least 2 seconds to
return to step 3, and start over from there.
NOTES:
• If the current time is not set, the timer standby setting cannot
be set to "ON". Be sure to set the current time before turning
on the timer.
• The timer will operate as long as it is turned on, even if the time
setting is off due to a power failure. If you want the timer to
operate correctly, be sure the current time is properly set.
• If the timer start time is reached while the power is turned on,
the set operates as set for the timer {The timer settings are
given priority.)
• Be sure to set the power to the standby mode to operate the
timer
==To Listen to the TUNER with the Everyday l_mer
• Set "Timer TUNER" in Step 4, then press the TIMER/SET
button.
• " will be displayed Use the FUNCTION/SELECT
dial to select the preset channel on which you would like to
receive with the timer, then press the TIMER/SET button.
• Hereafter, the same procedure is performed from Step 6.
71