Manual

r_ CONNECTIONS

• DO not plug in the AC cord until all connections have been

completed.

• Be sure to connect the left and right channels properly (left with

left, right with right).

• Insert the plugs securely. Incomplete connections will result in the

generation of noise.

• Note that binding pin plug cords together with AC cords or placing

them near a power transformer will result in generating hum or

other noise.

• Noise or humming may be generated if a connected audio

equipment is used independently without turning the power of this

unit on. If this happens, turn on the power of the this unit.

• When making connections, also refer to the operating instructions of the other components.

I Connecting the DIGITAL (optical) jacks I

Use these for connections to audio equipment with digital {optical) output

[ ,NOsTESopt[ca,cab,es f or opt[ca, connections, removing the cap before connecting

AC I20V, 60 Hz

I Subwoofer jack I_

Connect the internal amplifier's subwoofer to the

subwoofer terminal

• TO conduct digital recording onto a digital recorder (CD recorder, MD

recordei, etc) while playing Dolby Digital, 96 kHz PCM sources on

this DVD player

• Set the "AUDIO SETUP" default setting as shown below (See page

79, 80)

• "DIGITAL OUT" _ "PCM"

"LPCM SELECT" _ "ON"

Playing DVDs with incorrect settings may result noise that could damage

your ears or the speakers

OUTPUT INPUT OPTICAL

NOTES:

• Track numbers may not be added automatically when making digital

recordings of CDs being played on the ADV-100O onto a connected

recorder

• When making digital recordings on a CD recorde_, set the CD

recorder's recording setting to manual and add track numbers (track

marks) manually as you record

• When making digital recordings on an MD recordel, use the editing

function after the recording is completed to divide the tracks

Connecting a recorder ]

Connections for recording:

Connect the tape deck's recording input jacks (LINE IN or REC) to this unit's tape

recording (CDR/TAPE OUT) jacks using pin plug cords

Connections for playback:

Connect the tape deck's playback output iacks (LINE OUT or PB) to this unit's

tape playback (CDR/TAPE IN) jacks using pin plug cords