DVD SURROUND SYSTEM D-M51DVS DVD SURROUND RECEIVER ADV-M51 OPERATING INSTRUCTIONS MODE D'EMPLOI o,._ ° -,_ f f J MP3 WMA DD_ _ AI', L_t_ ._0 o L O ©_ ......_(o) FOR ENGLISH READERS PAGE 4 -- PAGE 109 POUR LES LECTEURS FRANCAIS • We greatly appreciate your purchase • To be sure you take maximum advantage of all the features this unit has to offer, read these instructions carefully and use the set properly. Be sure to keep this manual for future problems arise.
• SAFETY PRECAUTIONS WARNING: FCC INFORMATION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. (For US customers) 1. PRODUCT This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. 2.
SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating should be read befere the preduct is operated. instructions 13. Power:Cord Pretection - Power-supply cords should be reuted so that they are net likely te be walked on or pinched by items placed upon or against them, paying particular attentien te cords at plugs, convenience receptacles, and the point where they exit from the product. 2. Retain Instructions - The safety and eperating sheuld be retained for future reference.
CAUTION: NOTE: This DVD video player 1. Handle the power Do not damage deformed, When attachment cord carefully or deform it may removing supply cause the power electric from wall outlet, and not by pulling music supply shock cord. If it is damaged or malfunction be sure to remove when by holding or used. the plug In order to prevent electric Do not place metal Electric shock shock, you to enjoy to use this in a room of 5 Copyrights 2. Do not open the top cover 3.
I=IKe]| [.'_• [] BEFORE USING Pay attention to the following before using this unit: • Moving the set To prevent short circuits or damaged wires in the connection cords, always unplug the power cord and disconnect the connection cords between all other audio components when moving the set. • Before turning the power switch on Check once again that all connections are proper and that there are not problems with the connection cords.
WARNING: When installing the speaker systems on tile ceiling er wall, to ensure safety, have specialists do the installatien work. Be sure te fasten the speaker cords to a wall, etc., te prevent people from tripping over them er etherwise pulling on them accidentally, causing the speaker systems to fall. Be sure to check fer safety after installing the speaker systems. Afterwards, perform safety inspections at regular intervals to be sure there is ne danger that the speaker systems will fall.
l=l_[.i| E.'_ _l FEATURES The ADV-M51 combines an AV amplifier and DVD player, the core components of a home theater system, into a single compact, stylish body. The system takes up little space, and the aluminum front panel and half mirror of the display make for an elegant design that blends in nicely with the decor in your room. 1. 2-channel power amplifier with Dolby Virtual Speaker compatibility Tile ADV-M51 is equipped with two 35W (6 £_!ehms lkHz, T.H.D.
DISCS • The types ef discs listed en the table below can be used on the ADV-M51. The marks are indicated on the disc labels or jackets.
I=I_[.'I | E.'_ [] CAUTIONS ON HANDLING DISCS Only the discs including the marks shown on page 6 can be played on the ADV-M51. Note, however, that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played on the ADV-M51. Do not • Do not get fingerprints, grease or dirt on discs. • Be especially careful not to scratch discs when from their cases. • Do not bend discs. attempt • Do not heat discs. to play such discs, as they may damage the player.
F_ CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). • Insert the plugs securely. Incomplete connections will result in the generatien ef neise. • Nete that binding pin plug cords together with AC cords or placing them near a pewer transfermer will result in generating hum er other noise.
I=I_[.'I1 E.I" CAUTION: • Only one cassette deck can be connected to the ADV-M51 using system connections. System operations cannot be performed two cassette decks are connected using system connections. • Whenever the power operation switch is in the STANDBY position, the unit is still connected to AC line w)ltage. • Please be sure to unplug the power cord when you leave home for, e.g.,a vacation, etc.
• Connect the video signals directly to the TV and switch the picture on the TV. • When making connections, also refer to the eperating instructiens of the ether components. Digital satellite/cable I Connection to the optical digital input terminal tuner I • Only audio signals are input to the optical digital input terminal. • Use a commercially available optical transmission cable for connection to the optical transmission terminal (OPTICAL).
I=I_[.'I | E.'_ • When making connections, also refer to the eperating instructiens of the TV. [ S VIDEO TV I S VEDEO OUT Monitor TV ] • Connect the TV's S video input (S-VIDEO INPUT) to the _ OUT jack using a S jack connection cord. VIDEO OUT • Connect the TV's video input (VIDEO INPUT) to the VIDEO jack using a video connection cord. iiiii i I _ [] ) _ ANTEhNA ie eoe/eoe, !,S_ =.,,.°°'I_ i ......J_ NOTES: • Connect this unit video outputs to the TV either directly.
DIRECTION OF BROADCASTING STATION AM LOOP ANTENNA (Suppl)ed) FM INDOOR ANTENNA (Suppl)ed) FM ANTENNA 75 £_!ohms COAXIAL CABLE AM OUTDOOR ANTENNA GROUND • An F-type FM antenna cable plug can be connected directly. • If the FM antenna cable's plug is not of the F-type, connect using the F-type antenna adapter (Option). AM loop antenna assembly Connection Connect to the AM antenna term)nals. ii antennas 3. Return the (ever.
l=l_C.l| E:_" • When making connections, also refer to the eperating instructiens of the ether components. • The video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the celor difference Color component output connectors (Y) signals are output independently, achieving more faithful of the colors. • The color component input connectors may be marked differently on some TVs or monitors Y, B-Y and Y/CR, CB and Y, etc.).
• When a disc is played on the ADV-IVI51 (DIGITAL OUT) Refer to Settings Digital audio data output page Audio recording format Digital out : Normal Dolby Digital bitstream Dolby Digital 2 channels Digital out : PCM conversion PCM data (48 kHz/16bit) 95 Digital out : Normal DTS bitstream Digital out : PCM conversion 2 channels LPCM conversion mode : OFF 48 kHz/16 -24 LPCM conversion mode : ON 48 kHz/16 bit PCM LPCM conversion mode : ON 48 kHz/16 bit PCM CP: ON LPCM con
I:I_[.4|E:_" Either twist the core wires firmly or terminate the wires. The red side is the "+" side, the black side the "-" side. To "+" side on amplifier (copper colored core wire) NOTE: Make sure the core wires touch each other. To "-" side on amplifier (silver colored core wire) do not _l_Turn the speaker _2)lnsert terminal counterclockwis e to loosen Connecting the core wires, cord's _3)Turn clockwise to tighten the terminal. it.
[] PART NAMES • For details en the functions AND FUNCTIONS of these parts, refer te the pages given in parentheses DVD SURROUND RECEIVER ADV MSI _]_ Power button (ON/STANDBY) .................................................. Remete contrel senser ............................................................. ° i) II (32) Step/band button ( • BAND) .............................................. (23) Play/pause butten ( I_ / II) .......................................................
I=I_[.'I | E.'_ • Fer details on the functions of these parts, refer to the pages given in parentheses • Some of the buttons on the remote control unit have some functions. The functions are switched using the remote control mode selector switches. (). O Call button .:.....:._klM.klM.klM.klM.klM.klM..kM..kM..kM..kL.(67) _) Test tone button ....................................................................... (37) Input mode selector button ......................................................
• Buttons in sections • Consider _ - _, can be operated regardless of the position of mede switches and I1_ 1 and 2. as standard positions, and switch as necessary to operate. 11. Surround an" olifler control buttons ON Turns the ADV-M51 's power on. OFF Turns the ADV-M51 's power off.
Operate the ADV-M51. [1] Surround amplifier system buttons (Operated with mode switch 2 set to "IN/SURR.') • These <)peratiens are possible with mode switch any position. The eperatiens in gray print can be performed. [2] DVD system buttons (Operated with mode switch 2 set to "DVD") at NTSC/PAL C_) _ G_D CD @®®® o o o • o (71E. } SLEEP DVD TUNER D,AUX : Sleep en/eff Functien DVD : Functien TUNER : Functien D.
About the AV amplifier's crossover frequency selection The cressever frequency ef the satellite speakerJcenter speaker and the active subweofer (the boundary between the frequency range produced by the active subweofer and the other speakers) is set on the connected AV amplifier, and is usually fixed at between 80 and 120 kHz. With some amplifiers, however, including the Denen ADVM51, this frequency can be selected.
I=I_[e] | [.'_• IE1 REMOTE CONTROL UNIT • The included remote control unit (RC-936) can be used to operate not enly this unit but other remote control compatible DENON cempenents as well. in addition, the memory contains the centrol signals for other remote contrel units, so it can be used to eperate nen-DENON remote contrel compatible preducts. Notes on Batteries 11. Remove the remote centrol unit's rear cever. • Use R6P/AA batteries in the remote centrol unit.
• The included remote centrol unit (RC-936) can be used to operate not enly the ADV-M51 but also to perferm system operations fer the D-M31 series and to eperate ether remote control cempatible DENON products, in addition, the remote centrel operation codes of other major brands of TVs and video decks are also stored in the remote control unit, so the unit can be used te eperate these TVs and vide<> decks as well.
I=I_[.I | E.'_ • Components of ether brands can be operated with the included remote centrel unit by storing their codes in the preset memory. Note that depending en the model some operations may not be possible and some buttens may not eperate preperly.
Combinations of preset codes for different brands TV Admiral Fujitsu Adventura Akai Funai 122 016, 027, 046 Aileron 004,062 Futuretech 004 GE 020 125, 062 037 040 Amtron 06i Anam 006, 007, 036 Grundy 062 061,147 Hitachi 029, 031,051,052,070, AOC 003, 007, 033, 038, 039, 047, 048, 049, 133 Hitachi Archer 007 Infinity 007, 061 daneil Audiovox Bauer 044 015, 029, 031,039, 048, 051,056, Pay_ JBL 017, 071 JC Penny 020, 034, 039, 040, 041,044, Bradford 061 JCB 046
I=I_[.'I | E.
VCR Admiral 081 JVC 004, 005, 006, 026, 029, 043, 044, 045, 046, 085 Aiko 095 Kenwood 004, 005, 006, 026, 029, 033, 045, 085, 090 Aiwa 009 Kodak 088 Akai 026, 027, 070, 072, 082, 083, 084 Lloyd 009,094 Alba 055 LXI 088 Amstrad 009 Magnavox 015, 016, 042,049, Magnin 087 087 Marantz 004, 005, 006, 015, 042, 049, 085, 090 005,085 Marta 088 088 MEI 049 Memorex 009, 033, 049, 053, 060, 081,087, Asha Audio Dynarnic Audiovox Beaumark 087 Broksonic 088 Candle 006, 087, 08
I=I_[.'I | E.
Monitor TV (TV) and video _1 TV system 3-( deck (VCR) system buttons buttons TV 0~9 : Power on/off : Channel numbers TV IN TV VOL +, - : TV input swkcNng : Volume up/down TV CH +, - : Channel swkcMng 2 Video deck system buttons 0 0 0 0 --2 lm ® _ 0 ......
I'_ SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in "CONNECTIONS" settings described below on the monitor screen using the ADV-M51 's on-screen display function. • Use the following buttens to set up the system: SYSTEM (see pages 10 to 17), make the various I SETUP button Press this to display the system setup menu. S_TUS ® 0 0 .....
• Refer to "Connections" (pages 10 te 17) and check that all the cennectk)ns are cerrect. Turn the power. • Theonpower indicator (LED) lights green, the pewer turns en and the display lights. o_ / STA_D£Y %- i ,._'_L_x_-_o_ Green 1 % Main unit 0 _ _ _ o J 7 C_D (2Z) C_Z9 d25 _5 _ _,_ _,_, _ _,_ 0 0 •_ Several seconds are required from the time the power button is pressed until the power turns on.
l=l_[.i| E.'_ 4 Press the ENTER butten to display the menu's setting screen. ._ On the setting screen, the selected item is displayed in yellow and the values ef the other items are displayed in green. Use the and • system cursor tebuttons select the •speaker be used.te Remote control unit [1] TV screen size setting Remote control unit 8 #iiiiiiiiiiii;;iii; #i#iiiiiiiiiii; Press the ENTER butten te set the selected setting. • The setup screen in step 2 reappears.
• The quick system settings and original settings set upon shipment from the factory are changed using the system setting changing menu. The settings are stored in the memery until they are changed the next time, and remain valid even when the pewer is turned eff. [1] Speaker settings (type of speaker and whether or not the speaker is connected) • The eutput component of the different channels and properties are adjusted automatically used. Press the SETUP button te display the setup screen.
I=I_[.'I | E.'_ NOTE: • Select the speaker size net by the physical size of the speaker but by the speaker's capacity to reproduce lew frequencies of 100 Hz er less. If you de net know, determine the best setting by comparing the sound when the setting is set to "Small" and "Large", keeping the velume low eneugh te prevent damage to the speaker.
[2] Delay time (distance setting) • Input the distances from the listening positien and the various speakers to set the surreund delay time. • Upon shipment from the factery default the delay time is set te the default values in step 3 below. Preparation: Measure the distance from tile listening pesitien to the varieus speakers.
I=I_[.'I | E.'_ [3] Adjusting the channel level • Adjust se that the playback levels of the different channels are equal. • Make this adjustment by listening to the test tones output from the speakers at the listening position. • By factory default all the levels ef all the channels are set to 0 riB. • This adjustment can also be made directly frem the remote centrol unit. (CH SELECT Button) If yeu are net at the system setting read step 1 and 2 en page 34.
7 4 Press the ENTER butten te enter the settings. • The next screen in the system setting changing menu appears. Press the ENTER butten to enter the settings. • The next screen in the system setting changing menu appears. Remote control unit -_ To cancel the settings after the adjustments have been made Display the channel level adjustment screen, then use the •, ¥, _1 and I_ cursor buttens to select "Level Clear" and select "Yes". The level settings for all the speakers are set te 0 riB.
I=I_[.']| E.'J 4 Press the ENTER butten te enter the % settings. • The next screen in the system setting changing menu appears. [] PLAY BACK Remote control unit input function settings • LINE-1 and LINE-2 can be set as described belew. LINE-l: "MD", "CD-R", selected. "MD/CD-R" or "AUX" can be ("MD/CD-R" can only be set when a system MD recerder, cassette deck and CD recorder are all connected and system operations are being used.) LINE-2 : This can be set to "TAPE", "MD", "AUX" or "D.AUX".
• Set discs in the disc tray with the labeled (printed) side facing up. Figure 2 Disc tray NOTE: NOTES: • Do not move the this unit while may scratch the disc. a disc is playing. Doing so • If a foreign object is caught in the disc tray during closing, simply press the OPEN/CLOSE button again and the tray will open. • Do not press the disc tray in by hand when the power is off. Doing so will damage it. • Do not place foreign objects in the disc tray. Doing so will damage it.
I=IK.'I | E.'_ IMPORTANT SETUP INFORMATION This set has the following presettings: "DISC SETUP", "OSD SETUP", "VIDEO SETUP", "AUDIO SETUP", "RATINGS", and "OTHER SETUP". These presettings have been preset upon shipment from the factery. If you wish te change them to suit your specific purposes, refer te pages 88 to 100. _C_D_ ®®® (3)-5 @®@® 0000 -- (3)-5_ (4)- 1 -- (3)-8 ® (3)-1 0 -- (3)-7 --(3)-6 (3)-8 (4)-1 on the •Turn Press the power.
Use the curser buttons (A, ¥, -91and I_) to select the desired item. Either turn the main unit's main volume control or use the main volume contrel buttons on the remote centrol unit to adjust the w)lume. O O • For some discs there is a second menu screen, if so, press the _ button to display the next menu screen. (See the disc's jacket.) /The i"i . _...iCi i....i..i i"'i i.... ._ The cursor buttons (A, ¥, -91and I_) do net work for video CDs. Use the number buttens to select the desired item. .....
During press the li,-ll button II buttenplayback, on the remote centrol unit. on the main unit or the • Press the PLAY button te resume nermal playback. I- II Main unit Remote control unit O O O O m-7- c cD ® '8""'9" k_J 1 During playback, press ene ef the _ remote contrel unit. : Reverse directien I% o oo / I_1_ buttens en the • When pressed again, the search speed increases VIDEO CD in seven steps, CD in four steps). • Press the PLAY button te resume normal playback.
1 In the still mode, press one of the _ remote control unit. : Reverse direction I_1_ : Forward direction / I_1_ buttons %% on the • When pressed again, the slow play speed increases. (Four step) (Three step on video CDs) • Press the PLAY butten to resume normal playback. Remote control unit NOTE: • Reverse slow play is net possible on video CDs. OPERATING THE SURROUND FUNCTIONS @@®® @®@® s s i!iiiii_ __ -1 -3 --5 735 Press the FUNCTION button to select the input function to be played.
I=IK.'I| E.'_ Either turn the SURROUND/SELECT dial or press the SURROUND button on the remote control unit to select the surround mode. Input mode display • In the AUTO mode One of these lights, depending on the input signal. • In the DIGITAL PCM mode Main unit • The function Remote control unit switches • In the DIGITAL DTS mode :_DIG as shown below. • The function only changes in the "-->" operated from the remote control unit.
[1] Adjusting the sound quality The TONE/SDB function (TONE/SDB) [2] Turning the sound off temporarily (MUTING) will not work in the direct mode. 2 ...... :,,.o ,i¢ ®o_ 7 7 1 1 2 Use this to turn off the audio output temporarily. Press the MUTING button. ._ •Press The the toneTONE/SDB switches button. as follows button is pressed.
I=IK.'I | E.'_ DOLBY / DTS SURROUND (1) Dolby Digital Dolby Digital is the multi-channel digital signal fermat developed by Dolby Laboratories. Dolby Digital consists of up to "5.1 " channels - frent left, frent right, center; surround left, surround right, and an additional channel exclusively reserved fer additienal deep bass sound effects (the Low Frequency Effects - LFE - channel, also called the ".1 " channel, containing bass frequencies ef up to 120 Hz).
• Sources recorded in Dolby Surround are indicated with the logo mark shown below. Dolby Surreund support mark: [][][oou_,sunRou_o] Manufactured under license from Delby Laberateries. "Dolby", "Pre Legic" and the double-D symbol are trademarks ef Delby Laboratories. Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems. DTS offers the same "5.
l=l_[.i| E.'_ Dolby Virtual Speaker technology uses proprietary technology of Dolby Laboratories to create a virtual surround sound field using only two speakers for the front channels, allowing the user to experience sound as if surround speakers were actually being used. • Features of Dolby Virtual Speaker sound _'_Accurate suuound sound field positioning The virtual surround speakers are positioned at 105 ° to the left and 105 ° to the right.
SURROUND PLAYBACK • The Dolby Virtual Speaker mede is a mode using 3D sound technelogy frem Delby Laboratories te achieve multi-channel surround sound using only two speakers for the front channels. • With two speakers fer the front channels, ene of twe medes can be selected: Reference or Wide. • The Dolby Virtual Speaker mede can be used not only with Dolby Digital and DTS multi-channel sources but also with 2-channel sources.
I:IK.'I| F'_" 6 Select and set the surreund parameters. Surround parameters SURROUND/SELEC T (On the remete control unit, use the -91, I_ cursor buttons te set the parameters.) ._ If nothing is done for 6 seconds frem when the parameter is displayed, the nermal display _--_ |'(_ _,| Mainunit (1) DOLBY VS (Dolby Virtual Speaker mode) • REF (Reference mede) This is the standard mede. • WiDE (Wide mode) This mode expands the front channel sound field. D.COMP.
[2] 2-channel mode settings • When 2-channel signals are input, one of two Virtual 2. (The Virtual 1 mode is set by factory Virtual 1 : 2-channel sources are played in virtual Virtual 1 : 2-channel seurces are played in virtual playback modes can be selected and set accerding te the 2-channel mede setting, default.) surreund using Delby Pro Legic H Cinema precessing. surreund using Delby Pre Logic processing. 1 Set the surround mode te "DOLBY SPEAKER" ("DOLBY VS").
I=I_[.'1| E.'_ Surround parameters 1, VIRTUAL1 NOTE: (2) • If noise is generated for interactive and other high bit rate sources when playing DVDs or D.AUX digital input signals in the Delby Virtual Speaker mode, set "LINE-I/LINE-2 REC OUT" (Virtual 1 mode) In this mode, 2-channel sources are played with Dolby Pro Logic II Cinema processing. This mode is suited for playing movie sources recorded in Dolby Surround and regular stereo sources. under "[5] Function settings" and 39 to "Off". 2.
[1] DSP Surround simulation Display the parameter you want te adjust. • Use the curser buttons (A, ¥) te select parameter. _u°£_X££'_c_l_(_',_ Main unit 1 q.._,, the surreund _. Remote control unit • ROOM SIZE setting -1 =--2 _ ,_i;_i i_ilJ!ii_ • EFFECT LEVEL setting [ !i!i_,:::ii!il{'} 'i" "_ i,. ,! _,"] i5 4 • DEFAULT setting DENON _c 9s_ D £ i:::'i::_i...L 'i" 1 i.,4 -.,.....-...-p,. i Select the input seurce. FUNCTFON% Main unit 2 .
I=I_[.'] | E.
• Table of Surround Mode Parameters (3) Presence/absence Surround Surround DVS: Dolby Virlual default value indicated 2ch SDB TONE DECODE CONTROL MODE REFERENCE 0 (OFF/ 0 (OFF/ O'1 WIDE 0 (OFF} o (OFF) (VIRTUAL1/ DH1 0 (OFF/ 0 (OFF/ DH2 0 (OFF/ 0 (OFF/ DH3 0 (OFF/ o (OFF/ BYPASS 0 (OFF/ o (OFF/ x STEREO O (OFF} 0 (OFF/ x DIRECT x x x ROCK ARENA O (OFF) o (OFF) x JAZZ CLUB 0 (OFF} Q (OFF/ x VIDEO GAME o (OFF/ o (OFF/ x • Table of Surround Mode Parameter
• The ADV-M51 is equipped with the Dolby Headphone achieving 3D seund over regular headphones. • The Doiby Headphone mode • There are actually four Dolby • The Dolby Headphone mode Music 1 and Music 2 medes mode, a technelogy develeped jointly by Dolby Laboratories and Lake Technology fer is set when headphones are connected to the ADV-M51 's headphones jack. Headphone modes creating different seund field effects: DH1, DH2, DH3 and Bypass (nermal stereo playback).
Surround parameters (4) DOLBY H (Dolby Headphone modes) DH1 .............. Reference ream (small room with little reverberation) D H2 .............. Live room (reom with more reverberation than DH1) D H3 .............. Large roem (Larger room than DH1. Use this mode to achieve a sense of distance and diffusion ef the sound.) BYPASS ........ Stereo playback. 2-channel modes These carl be selected when playing 2-channel sources (analog, PCM, etc.).
I_1 LISTENING TO THE RADIO o 3 2 Set the remote control selector switches to A/V and TUNER. _ID C]I£D J2 ®®® ©®®® @®@® 0 0 0 @J 2 Example: Tuning in FM/AM statiens NOTE: Press the FUNCTION butten and select "TUNER". % FUNOTIO% Main unit 2 Select "FM" A humming sound may be heard when using a TV nearby while receiving AM pregrams. If this happens, move the system as far from the TV as possible.
• A tetal of 40 stations (including both FM and AM stations) can be preset. • Preset statiens can be given names with up to 8 characters • Preset statiens using the including remote contrel unit. (letters, numbers and symbols). f Set the remote control selector switches to A/V and TUNER. 4 ®®® in a rew te enter the station indicator, "P", flashes. % --3,5 0 0 0 Remote control unit O 5 Tune in the station yeu want to preset. i:'i;_ name you have input.
Use this to automatically search for FM broadcasts and store up to 40 stations at [)reset channels 1 to 40. NOTE: • If an FM station cannot be [)reset automatically using the manual "Preset memory" operation. due to poor reception, Using the TUNER function, press and hold the MENU/SET button of the main unit for 2 seconds or longer. • "AUTO PRESET?" and "-: NO/+: START" will alternately appear on the display of the main unit.
ON-SCREEN DISPLAY • The ADV-M51 is equipped with an on-screen display ("OSD") the disc on the screen when the functien functien that displays various types ef information en the suueund fur_ctiens and is set to DVD. 11. Setup screen • This is used te select the speaker system being used (quick system setting) and to change the function of the ADV-M51 and various settings when [)laving discs (system setting change and DVD setting change).
I=I_[.]|E:_" [_] • USING THE ON-SCREEN Use this function te display and change information DISPLAY Set the remote control selector switches to A/V and DVD. on the disc (titles, chapters, time, etc.) Q3D _ Q 1 m 3J 1-- Q]ZZD _ 1 _GED O J O O O DENON _c 93_ In the play mode, press the DISPLAY button. • The On-Screen • The picture % Display appears. on the TV screen switches each time the button is pressed. Remote control unit • The items displayed differ from disc to disc.
• The quality of the picture when playing discs can be adjusted. s_ Set the remote control selector switches to A/V and DVD. 1,2 _N_ WVC_ GD _D__PE 1 When playing a disc with the function set te DVD, press the % DISPLAY button to turn on the on-screen display, use the • and • curser buttons te select "PICTURE MODE", then press the ENTER button. • The picture quality adjustment screen appears.
I=I_[e] | [.'_• • Use this functien te play your faveurite audio or video sectiens repeatedly. [2]-1,2__ Q®®® OOOO [1] Playing 1 Repeatedly (Repeat Playback) In the play mode, press the REPEAT butten. • The display en the TV screen switches pressed, and the corresponding •_ _ each time the butten RE_T % is repeat play or step mode is set. lights on the display when the repeat play mede is set. "ALL" lights when the all repeat play mode is set.
[2] Playing a Certain Section Repeatedly (A-B Repeat Playback) During playback, press the A-B REPEAT button. • This sets start point A. _T_ % Remote control unk Press the A-B REPEAT button again. • This sets end point B, and repeat playback of the A-B section starts. Remote control unit ._ To return te normal playback: Press the A-B REPEAT button until "A TO B CANCELLED" appears on the TV screen. NOTES: • Repeat playback may not work for some DVDs.
I:I_ [.'I1 E.'_ • Use this function with video and music CDs to play the tracks in the desired order. • This function does not affect with DVD. f Set the remote control selector switches to A/V and DVD. Q:D _]ZZ} 3__ Press the PROG/DIRECT button once in the stop mode. • The program selection screen appears. P_0GmlaE_ Use the number program.
• Use this function with video and music CDs te play the tracks in randem order. • This function does net affect with DVD. f Set the remote control selector switches to A/V and DVD. ®®® @®®® O _Nc_ w vc_ O _cic 0 O _ cm mpE -- In the step mede, press the RANDOM button, • The randem play screen appears. Remote Press the PLAY (1_) butten, • The tracks start playing in random erder. > unit II Main unit • Random playback is net pessible fer seine discs.
I=IK.'] | [.'_" [1] Listening to Recorded MP3 CD/CD-R/CD-RW • There are many music distribution sites en the internet frem which music files in MP3 format instructed on the site and written onto a CD-R/RW disc can be played en the ADV-M51. can be downloaded. Music dewnleaded as If music recorded on commercially available music CDs is converted on a cemputer into MP3 files using an MP3 encoder (conversion software), the data on a 12 cm CD is reduced inte abeut 1/10 the amount of the eriginal data.
Use the • and • cursor buttons want te play, then press the to select the MP3 file you PLAY (1_) butten or ENTER button. • Playback starts. ÷ The display can be switched time and the single between remaining the single elapsed time by pressing the DISPLAY button. ._ Programmed Main unit Remote control unit Remote control unit playback is net possible with MP3 discs. '_ To change the MP3 file Press the STOP button, then use the • and • cursor buttons to reselect the desired MP3 file.
l=l_C.l| E.'_ [2] Listening to Recorded WMA (Windows Media Audio) CD-R/CD-RW • This unit carl play CD-R/RW music files that have been recorded in tile WMA (Windows w_ndows_Y_ WindOWSstates and/orMedia'otherandcountries.the Windows logo are trademarks, •_ WMA (Windows Media Audio): New audio coding of Microsoft • Uses of recordings of the copyright Corporation Media Audio) _ audio compression or registered trademarks of Microsoft format. Corporation in the United (U.S.A.
• JPEG files stored on Kedak picture CDs, CD-Rs and CD-RWs can be played as a slide shew and enjeyed en the ADV-M51. [1] Playing Kodak picture CDs • Playing Picture CDs The ADV-M51 can play Kodak Picture CDs, se you can view the photegraphs (Picture CDs is CDs containing phetographs taken on conventienal en Picture CDs, please contact a stere previding stored on them on a TV screen. silver film cameras which have been converted Kodak develepment services.
I=I_[.] | E.'_ [2] Playing still pictures stored on CD-Rs/RWs @@@® 1 3 0 0 0 0 f Set the remote control selector switches to A/V and DVD C_il) m _En _ wn cD__r 1 Lead the CD-R/RW on which the still pictures been written inte the ADV-M51. • When the disc is leaded in the ADV-M51, infermatien m 2,3 have the disc screen appears. • If there are multiple folders, preceed to step 2. • If there are ne felders on the disc, preceed te step 3.
-_ To view several of the still pictures stored on the disc at ence: • Press the STOP button to display up te 9 still pictures at ence. • Te select and view a still picture (to start the slide show from a specific still picture), use the curser buttens (¥, •, _1 and I_) te select the desired still picture, then press the ENTER butten. •_ To temporarily step the slide shew: • Press the PAUSE button. • Te resume the slide shew, press the PLAY butten.
l=l_[e]| E.'_ • [1] Switching • the Audio Language (Multiple With DVDs centaining Audio Function) multiple audio language signals, the audio language carl be switched during playback. f Set the remote control selector switches to A/V and DVD. 1 m DENON During playback, press the AUDIO button. • The current audio language number s displayed. % Remote control unit 2 Use the • and • curser buttons te select the desired language. • The display turns eff when the AUDIO butten is pressed.
[2] Switching • the Subtitle With DVDs centaining Language (Multiple Subtitle Function) multiple subtitle language signals, tile subtitle language can be switched during playback. Q ® control selector switches to A/V and DVD. _N_ w _ 0 ..... m VG_ QD ml DENON During playback, press the SUBTITLE butten. • The current subtitle language number is displayed. % Remote control unit 2 Use the • and • curser buttons te select the desired !T!E¸¸ language.
[3] Switching • the Angle (Multiple With DVDs containing Angle Function) multiple angle signals, the angle can be switched during playback. GE:)C_O O Set the remote control selector switches to A/V and DVD. _Z3 , SySTeM ®30 ¸ .... m _ZD MD_E _ _A_ IN/$_eR m D£NON During playback, press the ANGLE button. • The current angle number is displayed. 3/5 % Remote control unit Use the • and • cursor buttons te select the desired angle. • The display turns eff when the ANGLE butten is pressed.
[1] Using the Top Menu • Fer DVDs containing multiple titles, the desired title can be selected and played from the tep menu. f Set the remote control selector switches to A/V and DVD. l+TJ_l-- ,IJ_l • + + _Jm_sJm+ Q20 • SYSTEM m_ t t _IN_SU_ 0 O 0 During playback, press the TOP MENU button. • The top menu appears. 0 Example: 1 % Remote control unit 2 Use the cursor or number buttons I _ ]l_]j to select the desired title.
I=I_[.'I | E.'_ [2] Using the DVD Menu • Some DVDs include special menus called DVD menus. Fer example, DVDs with complex centents may centain guide menus, and DVDs with multiple languages may centain audio and subtitle language menus. These menus are called "DVD menus". Here we describe the general procedure fer using DVD menus. S Set the remote control selector switches to A/V and DVD, _ GED _ 3 • SYSTEM _0_ T t _IN_U_ 0 0 0 0 Example: During playback, press the MENU butten.
c_ s Set the remote control selector switches to A/V and DVD. _ _%%%__i_ + O --1 ® 0 0 ..... ®@® @®®® @@@® 0 0 • 0 --2 _,o, + 0 (£1]Z} DENON Rc g3_ 1 In the plaver pause mode, press the ZOOM button. z +_1 • The zeom rate increases each time the ZOOM button is pressed. Fer DVD videe discs and video CDs: OFF --> x1.5 --> x2 --> x4 --> OFF % Remote control unit Use the curser buttons picture.
I=IK.'] | [-'_" [_ USING • THE TIMER Timer and system operations are possible once the setup procedure has been completed. Example: Setting the current time to "7:30 p.m." 4, p _.,3,5,7 5 66 Pressthe MENU/SET button. i::_,:::i..i 6 ....i:::' i"i '7 ;;'_..i;:: ,'i; ::__.__ Turn the SURROUND/SELECT position. knob to move to the minutes 7 ' 1 /F _ 't- Turn on the power. oN _STaNDbY ii _ Main unit _, Press the MENU/SET button etc.
• Be sure to set the current time befere setting the timer. (See page 81 .) • Use the everyday timer to switch the power on and eff (standby) once at the same time each day. • With the ADV-M51 it is possible te play the tuner, a DVD or a CD with the timer. Use the once timer to switch the power on and off (standby) at the specified • It is pessible to play a DVD, CD, tape, the tuner, MD or the device cennected the device cennected to the AUX terminals time once eniy.
10 Press the MENU/SET button. • The "PM12" in the hours place is stored in the memory. !i!i; :: _. P i"!:i.2 :;s0;i,'_!{'- 17 .......T_X. Turn the SURROUND/SELECT knob to display "Eon". • The everyday timer is turned on and the timer standby indicator C) lights. This completes the setting of the timer. For more details, see "Turning the everyday timer Main unit and once timer SL_RRO t_D / SELECT _ _ f_ "1__-_'_ _1" Main unit on and off" on page 82.
Example 2: Listening to a CD with the ence timer 4 Turn the SURROUND/SELECT press the MENU/SET butten. kneb to display "ONCE", SURRO ,,I I I ) I ._ The display switches each time the SURROUND/SELECT PAR_M Main unk kneb is turned: ONCE--EVERYDAY 3,4,5,7 ND/SELECT RUSH as follows then '_EN _SET_, Main unit Turn on the power. 5 oN i STANDBY ,-% Press the MENU/SET button. • The once timer time setting • "1 " (once)lights. mede is set. _E_U_SE T@ ;i. i:::i...i".!i.i: "_."_.
I=I_[.'I | E.'_ • After the timer has been set using the procedure described under "(2) Setting the everyday timer and once timer" everyday timer and/er once timer on so that the set operations will be performed. 2 (pages 82 te 83), turn the • If only the ence timer is set, the setting changes as shown below each time the SURROUND/SELECT knob is turned. .....................
• If the times set for the everyday timer and once timer overlap, the once time has priority. • Checking the timer settings • Use the same procedure as when setting the timer to check the timer settings. _1_Press the MENU/SET button to display "TIMER". 12_Turn the SURROUND/SELECT knob to display "EVERYDAY" 13_The display switches between the set function, 14_The display returns to as it was before or "ONCE".
I=I_[.] | E.'_ • The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. • Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes). Example: To set the power to the standby mode in 50 minutesaccerding (Sleep timer) to the clock. Be sure to correct the current time setting. NOTES: S Set the remote control selector switches to A/V and IN/SURR..
CHANGING • THE DEFAULT SETTINGS (DVD) Tile initial setting that was set prior te shipping from the factory carl be changed. The setting contents are maintained until they are next changed even when the power is switched In the stop mede, press the SETUP button. At the Setup Menu, use the • and • cursor buttons off. to select "DVD SETUP" and press the ENTER button. Remote control unit Remote control unit Remote control unit 2 The setup (default settings) screen "DVD SETUP MENU" appears.
I=IK.'I | E.'_ I See page 88. Use the -91 and I_ curser 2 buttens to select the "DISC SETUP", then press the ENTER button. • DIALOG Use this to set tile language ef the sound eutput frem the speakers. • SUBTITLE Use this to set the language ef the subtitles the TV. • DISC MENUS displayed en Remote control unit Use this to set the language ef the menus recerded en the disc (top menu, etc.). .
4 ._ To exit the dialog mode Press the ENTER button, you can go back te the previous screen, ==When "SUBTITLE" is selected: • OFF (Factory default) Select this if you do net want to display the subtitles. (For some discs it is not possible to turn eff the subtitle display.) • ENGLISH Select this when yeu want subtitles in English. • FRENCH to play the DVD with the Select this subtitles in • SPANISH Select this subtitles in • GERMAN when yeu want French.
I=I_[.'I | E.
1 If yeu are not at the DVD setting screen, read steps 1 and 2 on page 88. Use the -91 and I_ cursor buttons to select the "OSD SETUP" tag icen, then press the ENTER butten. • WALL PAPER The image displayed when in the step mede or when playing a CD can be selected. Remote control unit Remote control unit 4 Use the • and • cursor buttons te select the setting te be set, then press the ENTER button. ==When "WALL PAPER" has been selected • Use the • and • cursor buttens to select the wallpaper.
l=IK.i| E.'_ 1 See page 88. 2 Use the -91 and I_ cursor buttons to select the "VIDEO SETUP", then press the ENTER button. • TV ASPECT Use this to set tile shape of your TV's screen. • TV TYPE Use this to set your TV's video format (NTSC, PAL or MULTI). • VIDEO MODE Remote control unit Use this to select tile video mode. (AUTO, FILM, VIDEO) • BLACK LEVEL The picture's "darker".
4 • When "TV TYPE" is selected: • NTSC (Factory default) Select this when your TV's vide() format is NTSC. If NTSC is selected, output format is fixed to NTSC. • PAL Select this when your TV's video format is PAL. If PAL is selected, output format • MULTI is fixed to PAL. Select this when your TV is compatible NTSC and PAL formats.
l=l_[e]| g.'_• I See page 88. 2 Use the _1 and I_ cursor buttons to select the "AUDIO SETUP", then press the ENTER button. • DIGITAL OUT Use this to select the digital output's signal format. • LPCM (44.1 kHz / 48 kHz) Use this te set the digital audio output DVDs recorded in linear PCM audio. when playing Remote control unk To exit the audio setup mode Use the • and • cursor buttens to select "> NEXT DVD MENU", then press the ENTER butten. • The screen returns to as it was in step 2.
4 • "LPCM SELECT (96 kHz _ 48 kHz)" is selected, • OFF (Factory default) Make the selection when playing back to a decoder DVDs that were recerded kHz/20/24 bit and 96 kHz modes. with this unit using linear PCM 48 Note that DVDs with Cepyright Pretectien are cenverted to 48 kHz/16 bits and played back. The same signal is output from the digital output jacks. • ON Remote control unit DVDs that were recorded with linear PCM 48 kHz/20/24 bit and 96 kHz modes are all cenverted to 48 kHz/16 bits.
I See page 88, 2 Use the 41 and I_ cursor buttons to select the "RATINGS", then press the ENTER button. • RATING LEVEL Use this to restrict playback of adult DVDs you do not want children to view. Note that even with adult DVDs, viewing cannot be restricted unless the restriction level is recorded on the disc. It is however • PASSWORD possible to disable playback of all DVDs. Use this to change the password. The set's password is set to "0000" Remote control unit by default.
4 Use the number buttons to input a 4-digit password, then press the ENTER button. ÷ Be sure to set the DVD mode using the remote control mode selector buttons. ÷ Tile set's password is set to "0000" without Remote control unit & has been forgotten or when a "PASSWORD tile number password, CHANGE" buttons then press tile the password. •_ The cannot the correct ÷ The set's password unit input a 4-digit ENTER button.
I=I_[.'I | E.'_ NOTES: • An English caption decoder is required to display English captiens. • DVDs with captien signals are indicated by the D , _J , t_l , mark. English captions cannet be displayed when playing DVDs which de not contain caption signals. • The characters in which the captiens are displayed (capital letters, small letters, italics, etc.) depend on the DVD and cannot be selected with this unit. 1 See page 88.
4 • When "SLIDE SHOW" has been selected • Use the • and • cursor buttons to set the time. • The interval can be set from 5 to 15 seconds in steps of 1 second.
[] • SYSTEM Making system instructions • FUNCTIONS connections on cennectiens, System functions between the ADV-M51 refer te "Connecting and the D-M31 will not work properly if the input/output input/output functiens fer the compenents when the power is switched off. series cassette to D-M31 Series System Components" function deck (DRR-M31) makes operation even easier. (Fer on pages 10 to 11 .) settings are net right fer the connected being used. (See [)age 38.
• CDs can easily be recorded ente cassette tapes. Main unit (ADV M51) Cassette 3,,._) -- deck (DRR-M31) IA) 3,,_) 7 ®®® ®®®® 0 0 0 ® 0 0 '_ _ -- 2, _2.- 7-1/0 [1] Synchronized 1 recording function [2] Synchronized @ ® Turn on the ADV-M51 's power. • The system's O._ST_=O=_ power turns en. ,,/,/_'_-_',, } ADV M51 2 6 ,G: 2,,,'_) Press the "DVD". FUNCTION butten 0.(_\ the functien to Remote control unit ADV M51 Check that the total number of tracks and total playing time on the
I:I_[.'1| E.'_ • The tracks on the CD can be automatically CDs only) divided into sides A and B for recording according to the ength ef the cassette tape (tape time). (Fer • Edited recording is pessible for CDs containing up te 25 tracks. Fer CDs with 26 tracks or more, editing is not pessible. Example: Recording a CD with 16 tracks and a total playing time of 56 minutes onto a C-60 (60-minute) cassette tape Main unit ADV-M51 4 4 load the CD, then close the Openholder.
6 Press the play/pause butten on the ADV-M51 or the DVD play button en the remete control unit. _,, % • Playback of the CD and recerding onto the cassette tape start simultaneously. ADV M51 ili!i:i. i_ .... ili!iili!ii; ili!i:i. Remote control unit •_ To quit the edited recording function, press the ADV-M51 's stop butten. (_B_° "-_X'-_ {_ ADV M51 Remote control unit NOTES: • The edited recording function cannot be used with CDs centaining 26 tracks er mere.
I=I_[.'I | E.'_ _] LAST FUNCTION MEMORY • This unit is equipped with a last function power is switched off. memory which stores the input and output setting conditions as they were immediately This function eliminates the need to perform complicated resettings when the power is switched on. • The unit is also equipped with a back-up memory. This function provides memory storage when the power switch cord disconnected.
[] TROUBLESHOOTING • Are all the • Are you • Are the If this unit connections following speakers does off the pewer, the and net seem unplug correct ? instructions other in the components te be functiening the power manual properly, cerd frem ? operating the power properly check outlet, tile ? table belew, and contact Symptom If this yeur does stere not selve of purchase * o DISPLAY lit but sound not produced. Z u_ Monitor doesn't display an image.
I=I_[.'I | E.'_ Symptom Check Playback does not start when PLAY button is pressed. Playback stops immediately. * Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.) * Discs other than DVDs, video CDs and music CDs cannot be played. * Disc is dirty. Wipe off the dirt. Menu playback of video CD's is not possible. * Menu playback is not possible with anything Picture is disturbed operation. * Some disturbance during the search but video CDs with playback control.
I_1 SPECIFICATIONS • Audio Section • Power Amplifier Section Rated output: Practical maximum output: Output terminals: Front: 20 W + 20 W (8 _-_/ehm load, 20 Hz to 20 kHz, T.H.D. 0.
I=IK.'I | E.'_ Speakers SYS-M51 • Satellite speaker (D-M51DVS system only) (SC-A3L) Type: 2-way, 3-speakers Speakers: Clesed box / Low-leakage-flux 5.7 cm cene bass-mid x 2 1.9 cm super_high range x 1 Input impedance: 6 D./ohms Max. input: 40 watts (IEC) 100 watts (PEAK) Frequency range: Dimensions: 120 Hz - 90 kHz 70 (W) x 210 (H) x 161 (D) mm (3-3/4" x 8-17/64" x 6-11/32") Mass: 1.
