Manual

F_ CONNECTIONS

• Do not plug in the AC cord until all connections have been

completed.

• Be sure to connect the left and right channels properly (left with

left, right with right).

• Insert the plugs securely. Incomplete connections will result in the

generatien ef neise.

• Nete that binding pin plug cords together with AC cords or placing

them near a pewer transfermer will result in generating hum er

other noise.

• Neise or humming may be generated if a connected audio

equipment is used independently without turning the power of this

unit on. If this happens, turn on the pewer of the this unit.

• The ADV-M51 can be used connected in a system with the D-M31 series cassette deck (DRR-M31).

• For instructions on eperating the separately sold cassette deck (DRR-M31), refer to their respective eperating instructions.

• Only the DRR-M31 cassette deck can be connected directly to the ADV-M51 using system connections.

NOTE:

• This system includes digital circuitry which may cause interference such as

color blotching or changes in the color on TVs. If this happens, move the

system and the TV as far apart as possible.

Connecting the speaker systems

Connect the speaker system for the left channel (the left side as seen from the

front) to the L terminals, the speaker system for the right channel to the R

terminals. Refer to the instructions supplied with the speaker system for details.

Be sure to use speaker systems with an impedance of 6 £l/ohms or greater.

FM indoor antenna

I Speaker system I (included)

SC-A3L [D-M51 DVS only] AM loop antenna

Or commercially available _ _ (included)

speaker _

The ADV-M51 includes a built-in clock function,

so plug its power cord into a wall power outlet to