Manual

l=l_[.i| E.'_"
4
5
Press the ENTER butten to display the
menu's setting screen.
._ On the setting screen, the selected
item is displayed in yellow and the
values ef the other items are
displayed in green.
[1] TV screen size setting
#iiiiiiiiiiii;;iii;
#i#iiiiiiiiiii;
iiiiiiiiiiiiiiiiiiiiiii
iiiiiiil;iiiiiiiiiiiii
• The currently set value is displayed in yellow.
Remote control unit
Use the • and • curser buttens te
--X'x
select the desired TV screen size and
display type.
•_ The selected TV screen size is
displayed in yellew and the _'_,
description is displayed in green. "-.
Remote control unit
Use the • and • cursor buttons te
select the speaker system te be used.
8
Remote control unit
Press the ENTER butten te set the
selected setting.
• The setup screen in step 2 reappears.
_The setup mede is quit in step 9.
÷ The setup mode can also be quit by
using the • and • cursor buttons at
the setup screen te select "EXIT
SETUP" then pressing the ENTER
button.
Remote control unit
9
Press the SETUP button to quit the
setup mode.
•_ The setup mode can alse be quit by
using use the • and • cursor buttons
at the setup screen te select "EXIT
SETUP" then pressing the ENTER
button.
_uP
Remote control unit
About the speaker system settings
_ 2CH VIRTUAL
Select this when only using with the twe speakers for the frent
channels.
_ 2CH VIRTUAL & SW
Select this when using twe speakers for the frent channels and
a subweofer with built-in amplifier.
• Settings
Frent : Small
Subweefer : Yes
Subweofer frequency : 150 Hz
•@Set the frent speakers and subweofer at equal distances.
Press the ENTER butten te set the
selected setting.
• The screen shewn belew appears.
[2] Speaker system settings
Remote control unit
NOTE:
• The speaker system is set te "2CH VIRTUAL & SW" upen
shipment frem the factory. It is net possible to achieve the
nermal bass sound using this setting but with enly speakers for
the two front channels. If only using speakers for the twe front
channels, change the setting to "2CH VIRTUAL".
iiiiiiiiiiiiiiiiiii;i
• "Return" is displayed in yellow.
• The currently set value is displayed in green.
• If you de not want to change the setting, press the ENTER
button at "Return". The screen in step 2 reappears.
• Te change the setting, proceed to step 7 below.
33