Manual

[2] Delay time (distance setting)

• Input the distances from the listening positien and the various speakers to set the surreund delay time.

• Upon shipment from the factery default the delay time is set te the default values in step 3 below.

Preparation:

Measure the distance from tile listening pesitien to the varieus speakers.

FL FR

Subwo

LI: Distance between subweofer and

listening pesitien

L2: Distance between frent speakers

and listening positien

Listening position

If yeu are not at the system setting changing menu screen,

read step 1 and 2 en page 34.

At the system setting changing menu screen, use the -91and

I_ cursor buttens to select "DELAY TIME (Distance)", then

press the ENTER button.

Use the • and • curser buttons to select the speaker, then

use the -91and I_ cursor buttons te set the distance between

the speaker and the listening positien.

• The distance changes by 0.1 meters (or 1 feet when the

unit is set to feet) each time the -91and I_ curser butten is

pressed. Select the value closest to the measured distance.

Remote control unit Remote control unit

• The delay time setting screen appears.

iii!iiiiiiiiiiiiiiii!

• The unit for the distance can be switched between "m"

(meters) and "ft" (feet) using the -91and I_ cursor buttens.

If you do net want te change the unit, press the • curser

butten to preceed to the next step.

At "Default Value", select "Yes" te set the delay times fer the

different speakers te the default values.

_,_Yes: The values are set to the defaults.

_DNe: The current settings are retained.

•_ Make sure the difference in the distances set fer the

varieus speakers is ne greater than 3.0 meters (10 feet).

If an inappropriate distance is set, "CAUTION: OUT OF

SETTING RANGE" is displayed. Change the position of the

speaker and make the setting ever.

Press the ENTER butten to enter the

settings. (_

• The next screen in the system setting

changing menu appears.

Remote control unit