Manual

I:IK.'I| F'_"
6
Select and set the surreund
parameters. SURROUND/SELECT
(On the remete control unit, use the _--_
-91, I_ cursor buttons te set the |'(_ _,|
parameters.)
._ If nothing is done for 6 seconds
frem when the parameter is Mainunit
displayed, the nermal display
reappears.
_ Setting the DOLBY VS mode
i,,,'L:it..':::_;:;i:_ii:_-_;..'..: .: !i!i;]
•_ The selected mode flashes.
._ The mode is not displayed if it cannot be selected.
_ D.COMR setting
J
_ Setting the LFE level
!..FF i:,:i!i!il ]
... []
•_ The LFE level can be adjusted in steps of 1 dB between
-10 dB and 0 dB.
_,_DEFAULT setting
._ When "YES" is selected, the settings are restored te the
factory defaults.
•_ When the surreund parameters are displayed, use the • and •
curser buttons en the remote centrel unit te switch to previous er
fellowing items.
-_ Once the surround parameters have been set, step operating the
buttons. After several seconds, the normal display reappears and
the settings are autematically entered.
Surround parameters (1)
DOLBY VS (Dolby Virtual Speaker mode)
• REF (Reference mede)
This is the standard mede.
• WiDE (Wide mode)
This mode expands the front channel sound field.
D.COMP. (Dynamic range compression)
• TMs parameter adjusts the dynamic range ef the Delby
Digital er DTS sound. When listening with the w)lume
turned relatively low, at night for example, set this te the
"HI" side to lewer the peak ef the seund and amplify the
quieter sounds, narrowing the dynamic range and making
the seund easier te listen te. Set to "OFF" te turn this
functien off.
OFF _H_ LOW _H_ MID _H_ HI
Wide = = Narrow
Dynamic range
• With DTS seurces, enly displayed fer sources cempatible
with dynamic range compressien.
LFE (Low Frequency Effect):
• Pregram source and adjustment range
1. Dolby Digital : -10 dB te 0 dB
2. DTS Surround : -10 dB te 0 dB
• When Delby Digital encoded software is played, it is
recommended that the LFE LEVEL be set te 0 dB fer correct
Dolby Digital playback.
• When DTS encoded mevie software is played, it is
recommended that the LFE LEVEL be set te 0 dB fer correct
DTS playback.
• When DTS encoded music software is played, it is
recommended that the LFE LEVEL be set te -10 dB fer
correct DTS playback.
51