Manual

[2] 2-channel mode settings
• When 2-channel signals are input, one of two playback modes can be selected and set accerding te the 2-channel mede setting, Virtual 1 er
Virtual 2. (The Virtual 1 mode is set by factory default.)
Virtual 1 : 2-channel sources are played in virtual surreund using Delby Pro Legic H Cinema precessing.
Virtual 1 : 2-channel seurces are played in virtual surreund using Delby Pre Logic processing.
k_J k_J
I
o o_o 1
_,c, ÷
DENON
_c g3_
3
2
NOTES:
• The 2-channel mede cannot be set when Dolby Digital or DTS
5.1-channel signals.
• The 2-channel mode is set and stered in the memory individually
fer the different functions.
1
Set the surround mode te "DOLBY VIRTUAL SPEAKER"
("DOLBY VS").
• The normal display reappears after the surreund mede is
displayed.
SURROUNg/SELECT
_US_ PA_M SU_ROUN_
Main unit Remote control unit
Press the SURROUND PARAMETER
button and select the 2-channel
mode.
Main unit
•_ This can be selected if there is ne
digital input signal, if the digital
input is a PCM or Delby Digital 2-
channel signal and if the input is
analog.
%
Remote control unit
Turn the SURROUND/SELECT centrel on the main unit or use
the -91and I_ curser buttens on the remote centrel unit to
select the desired 2-channel mode.
Main unit Remote control unit
VIRTUAL 1_ VIRTUAL 2
•_ Once the surround parameters have been set, stop operating the
buttons. After several seconds, the normal display reappears and
the settings are autematically entered
52