Manual

• The quality of the picture when playing discs can be adjusted.

Set the remote

control selector

switches to A/V

and DVD.

_N_ WVC_

_D__PE

When playing a disc with the function set te DVD, press the

DISPLAY button to turn on the on-screen display, use the • and •

curser buttons te select "PICTURE MODE", then press the

ENTER button.

• The picture quality adjustment screen appears.

• The on-screen display alse turns on when the DISPLAY button

is pressed in the step mede.

Remote control unit

1,2

_,, _" Remote control unit

Remote control unit

Use the -91and I_ curser buttons to select the item, then press the ENTER butten.

Standard:

Beth the picture quality and functiens are set back to the standard settings set

upen shipment from the factory.

Anime:

This sets a brighter mere vivid picture quality.

Cinema:

This sets a meilower picture quality.

Memory 1 to 3:

Pictule quality settings you t_ave adjusted can be stoled at thee Illeilloly

positions. (Set at step 3)

Selecting and adjusting the picture quality

Use the -91and I_ curser buttens to select the picture quality item, then use the •

and • cursor buttens to adjust the value.

• All the adjustments are stored in the memory.

Contrast (-6 to +6} (factory default: 0):

This adjusts the contrast between light and dark pertions of the picture.

Brightness (0 to +12) (factory default: 0):

This adjust the brightness (vividness) of the picture.

Color density (-6 to +6) (factory default: 0):

This adjusts the coier density.

Hue (-6 to +6} (factory default: 0}:

This adjusts the balance between green and red. (This setting dees not affect

pregressive scan eutputs.)

._ To complete the picture quality adjustment:

Press the DISPLAY butten again.

NOTE:

• Depending on the disc being played, the picture or seund may be disturbed when the en-screen display is displayed. This is not a

malfunction.