Manual
Use the • and • cursor buttons to select the MP3 file you
want te play, then press the PLAY (1_) butten or ENTER
button.
• Playback starts.
÷ The display can be switched between the single elapsed
time and the single remaining time by pressing the
DISPLAY button.
._ Programmed playback is net possible with MP3 discs.
'_ To change the MP3 file
Press the STOP button, then use the • and • cursor
buttons to reselect the desired MP3 file.
'_ To set the random play mode
In tile stop mode, press the RANDOM button.
Then press the PLAY (1_) button or ENTER button.
._ To set the repeat mode
The repeat mode changes each time the REPEAT button is
pressed.
NORMAL -> TRACK REPEAT -> FOLDER REPEAT
t I
Remote control unit
Main unit Remote control unit
Remote control unit
._ To return to the initial disc information screen
Press the STOP (I) button, use the • cursor button to
select "ROOT" at the upper right of the screen, then press
the ENTER button.
The screen in step 1 reappears.
NOTES:
• The ADV-M51 is compatible with the "MPEG-1 Audio Layer 3" standards (sampling frequency of 32, 44.1 or 48 kHz). It is net compatible
with such ether standards as "MPEG-2 Audie Layer 3", "MPEG-2.5 Audio Layer 3", MP1, MP2, etc.
• It may net be possible to play some CD-R/RW discs due te disc properties, dirt, warping, etc.
• The digital signals output when playing MP3 files are MP3 signals converted into PCM, regardless of whether the audio eutput presenting
is set to "nermal" or "PCM conversion". The signals are output with the same sampling frequency as that of the music source.
• In general, the higher an MP3 file's bit rate, the better the sound quality. On the ADV-M51, we recommend using MP3 files recorded with
bit rates of 128 kbps er greater.
• MP3 files may net be played in the expected erder, since the writing software may change the pesitien ef the folders and the order of
the files when writing them en the CD-R/RW.
• Manual search and programmed playback are net possible with MP3 discs.
• When writing MP3 files on CD-R/RW discs, select "1S09660 level 1 " as the writing software format. This may net be possible with some
types of writing seftware. For details, refer te the writing seftware's usage instructions.
• With the ADV-M51 it is possible to display felder names and file names on the screen like titles. The ADV-M51 can display up to 11
characters, consisting ef numbers, capital letters, and the "" (underscore) mark.
• If recorded in a format ether than "1SO9660 level 1 ", normal display and playback may not be possible. In additien, folder and file names
including other symbols will net be displayed properly.
• Be sure to add the extensien ".MP3" to MP3 files. Files cannot be played if they have any extension other than ".MP3" or if they have
no extension. (with Macintosh computers, MP3 flies can be played by adding the extension ".MP3" after the file name consisting of up
to 8 capital or numbers and recording the files en the CD-R/RW.)
• Do not apply stickers, tape, etc., to either the label side or the signal side ef CD-R/RW discs. If adhesive gets on the surface ef a disc,
the disc may get stuck inside the ADV-M51 and be impossible to eject.
• The ADV-M51 is not compatible with packet write software.
• The ADV-M51 is not compatible with ID3-Tag.
• The ADV-M51 is not compatible with play lists.
70