Manual

l=l_[e]| g.'_•
I
2
4
See page 88.
Use the _1 and I_ cursor buttons to select the "AUDIO
SETUP", then press the ENTER button.
• DIGITAL OUT
Use this to select the digital output's signal format.
• LPCM (44.1 kHz / 48 kHz)
Use this te set the digital audio output when playing
DVDs recorded in linear PCM audio.
To exit the audio setup mode
Use the • and • cursor buttens to select "> NEXT DVD
MENU", then press the ENTER butten.
• The screen returns to as it was in step 2.
Remote control unk
Remote control unk
Use the • and • cursor buttons to select the desired
setting, then press the ENTER button.
mWhen "DIGITAL OUT" is selected,
• NORMAL (Factory default)
Make the selection when playing back in surround
playback a DVD that has been recorded with Dolby Digital
or DTS on this unit.
The Dolby Digital or DTS digital signal is also output from
the digital output jacks.
• PCM
DVDs that were recorded in Dolby Digital DTS are
converted te linear PCM 48 kHz/16 bit (2 channels). Make
the selection when making a digital recording.
•_ To exit the digital out mode
Press the ENTER butten, you can go back te the previous
screen.
Remote control unk
Remote control unit
95