Manual

• "LPCM SELECT (96 kHz _ 48 kHz)" is selected,

• OFF (Factory default)

Make the selection when playing back to a decoder DVDs

that were recerded with this unit using linear PCM 48

kHz/20/24 bit and 96 kHz modes. Note that DVDs with

Cepyright Pretectien are cenverted to 48 kHz/16 bits and

played back.

The same signal is output from the digital output jacks.

• ON

DVDs that were recorded with linear PCM 48 kHz/20/24

bit and 96 kHz modes are all cenverted to 48 kHz/16 bits.

Make this selection at the time of digital recerding.

._ To exit the LPCM select mode

Press the ENTER butten, you can go back te the previous

screen.

Remote control unit

NOTES:

• When playing Dolby Digital/DTS surround DVDs or 96 kHz linear PCM DVDs on the ADV-M51, be sure to set "Digital Output" to "Normal"

and "LPCM Conversion Mede" to "De Net Cenvert".

• When and only when you want te eutput the signals ef the Dolby Digital/DTS surreund DVD being played en the ADV-M51 to a digital

PCM device, set "Digital Output" to "PCM Cenversien".

With this setting, DVDs cannet be played en the ADV-M51 in the Delby Digital/DTS surround mode. (The surreund mode is set to the

mode in which PCM 2-channel signals can be played.)

• When and enly when you want to make a digital recording of the signals of a 48 kHz/20-bit/24-bit or 96 kHz linear PCM DVD being played

on the ADV-M51 onto a digital recorder, set the "LPCM Cenversion" to "Convert".

With this setting it is not possible te decode and play 48 kHz/20-bit/24-bit or 96 kHz linear PCM signals en the ADV-M51 during recording.

(Decoding and playback is in 48 kHz/16-bit linear PCM fermat.)