Home Theater System User Manual

55
ENGLISH
5
• DEFAULT setting
YES NO
,/
When “YES” is selected, the settings are reset to their
factory default values.
Stop operating buttons once the surround parameter settings have
been completed. After several seconds the normal display
reappears and the settings are automatically set.
Y/N
Surround parameters (3)
ROOM SIZE:
• This sets the size of the sound field.
There are five settings: “SMALL”, “MED-S” (medium-
small), “MED”, “MED-L” (medium-large) and “LARGE”.
“SMALL” recreates a small sound field, “LARGE” a large
sound field.
EFFECT LEVEL:
• This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the
level if the sound seems distorted.
DELAY TIME:
• In the MATRIX mode only, the delay time can be set within
the range of 0 to 110 ms.
DEFAULT Y/N
1ADV-M71E2_ENG p1-60 03.12.25 1:05 PM ページ 55