User Manual

3
Select “DENON AH-C820W” from the list of devices
displayed on the screen of your Bluetooth device.
When pairing is completed and the Bluetooth connection is
established, the Bluetooth LED lights for approximately 2.5 seconds.
0
If the vibration function is on, the neckband vibrates three times
when the Bluetooth connection is established. (v p. 13)
.
DENON AH-C820W
4
Playing back music on the Bluetooth device.
Music played back on the connected Bluetooth device is output from
the headphones.
0
If the power is on, press and hold the X button for approximately 4 seconds to turn
the power off before pairing.
0
The headphones pairing mode is canceled if pairing is not completed within 3
minutes. In this case, press and hold the X button for approximately 4 seconds to
turn the power off and then pair the devices again.
0
If you are requested to enter a PIN code (pass key), enter “0000” (four zeros).
Contents Preparation Connections Operation Troubleshooting Appendix
16