TM GLOBE CRUISER AH-NCW500 On-Ear Headphones / Wireless Headphones Owner’s Manual
Getting started Thank you for purchasing your Denon Globe Cruiser headphones. Denon’s engineers have taken great care to design and develop these headphones to provide you with the best-in-class personal listening experience. Please refer to this guide for assistance when using these headphones.
Getting started Preparation for Use Charging the battery Functions NOTE • If the battery runs out during headphone use, a beeping sound will be emitted and the headphones will turn off. • Usage time may vary depending on the usage environment’s temperature, method of use, etc. • If usage time is extremely short even when the battery has been fully charged, the battery may be near the end of its life. In this case, please contact DENON service center. • Do not attempt to replace the battery.
Preparation for Use Pairing with a Bluetooth device To listen to music or make phone calls, the Bluetooth device must first be registered (pairing). After pairing has been completed, the Bluetooth device can be reconnected to the headphones. NOTE Please pair devices again in the following cases. • After nine devices or more have been paired The headphones can register a maximum of eight devices.
Preparation for Use Turning Bluetooth Wireless Connectivity On Adjusting the fit of the headphones Turn the Bluetooth function on in advance for the Bluetooth device which is to be connected. Press and hold the headphones’ Bluetooth button for approx. 1 second. • A beeping sound will be emitted and the red and blue LED indicators will light up simultaneously for approx. 1 second. • The power switches on, and the Bluetooth function switches on.
Listening to Music When using the headphones wirelessly, make sure that the Bluetooth function on the Bluetooth device is enabled. When using the headphones with the cable connected, make sure that the Bluetooth function is disabled. Listening to music using Bluetooth Operates the paired Bluetooth device using the control wheel.
Conducting Phone Calls Your Denon Globe Cruiser headphones feature integrated controls and microphones for easy hands free phone conversations. The call button on the left ear cup allows you to easily operate Bluetooth compatible mobile phones once they’re paired with the headphones (vpage 3 “Pairing with a Bluetooth device”). Using the call waiting function Use either of the following methods to take an incoming call while a call is in progress.
Additional Information Airplane use Overview of LED indicator display patterns To use these headphones to listen to the on-board music broadcast in the aircraft cabin, use the included audio cable and conversion plug.
Additional Information Troubleshooting Storing in the carrying case Denon Globe Cruiser headphones have been engineered to provide superior audio performance and ease of use. If you encounter issues with the operation of the headphones, please check below for answers to common issues. Issue Bluetooth function will not turn on. Cannot perform pairing. Cannot establish Bluetooth connection. Remove the cable and plug, fold up the headphones and place them in the case.
Additional Information Precautions on use of the headphones Trademark information • Make sure to read the owner’s manual for the device to be connected to the headphones. • To avoid disturbing others around you, be aware of the headphones’ volume level when using public transportation or when in a public place. • This product does not guarantee successful operation of this product together with all Bluetooth devices and mobile phones.
www.denon.com D&M Holdings Inc.
