Owner`s manual

ENGLISH
Fram;ais Deutsch English
Espaiiol
II GUI time out
Set the GUI display time when not
operating.
[Selectable items]
[Selectable items]
I Always I 30s 105
* Normally there is no need to set this.
NTSC PAL
[Selectable items]
II Format
Select the video output signal format to
match the monitor.
Emt
When a format other than the video format of the
connected monitor
is set, the picture will not be
displayed properly. Use the procedure described
below to change the video format.
~". Operating from the Remote
• ~ \ Controller
[Set
to NTSC]
• Press and hold the TOP MENU and PAGE~ buttons for
at least 3 seconds.
"NTSC"
is set.
[Set to PAL]
• Press and hold the TOP MENU and PAGEV buttons for
at least 3 seconds.
"PAL:' is set.
Screensaver
Format
GUI time out
• Screensaver
Make screensaver settings.
Use the screensaver to prevent burn-in
on
the monitor screen.
When set to "ON',' the screensaver
is
activated if there is no activity for about 3
minutes.
[Selectable items] ~ OFF
12