Owner`s manual
Troubleshooting
If a problem should arise, first check the following:
1.
Are the connections correct?
2.
Is
the set being operated
as
described
in
the owner's manual?
3.
Are the other components operating properly?
If this unit does not operate properly, check the items listed
in
the table below. Should the problem persist. there may
be
a malfunction.
In
this case, disconnect the power immediately
and
contact your store of purchase
[General]
ENGLISH
Symptom
Cause
Countermeasure
Page
No
sound
is
produced
• The
iPod
is
not playing.
• Check that the
iPod
is
playing
-
No
image appears
on
the
•
The
iPod
is
not properly connected to the ASD-3N.
• Check that the
iPod
is
properly connected to the ASD-3N's
-
monitor.
•
The
AC
adapter
is
not connected to the ASD-3N or a power dock connector.
outlet.
• Check the connections.
6
•
The
AV/Control cable
is
not properly connected.
•
The
monitor's input selection
is
not properly set.
• Check the connections.
6
• Set the monitor's input selector to the proper position for
6
the connected video input terminal.
[Remote Control Unit]
Symptom
Cause
Countermeasure
Page
Set does not work
• Batteries are worn. • Replace with
new
batteries.
3
properly when remote
•
You
are
operating outside of the specified range
• Operate within the specified range.
3
control unit operated.
• Obstacle between main unit and remote control unit.
• Remove the obstacle.
3
• The batteries are not inserted
in
the proper direction,
• Insert the batteries
in
the proper direction, following the 3
as
indicated by
the
polarity
marks
In
the battery polarity marks
in
the battery
compartment
compartment.
• The set's remote control sensor
is
exposed to strong light
• Move the set to a place
in
which the remote control sensor
3
(direct sunlight, inverter type fluorescent bulb light,
etc)
will not
be
exposed to strong light.
21