Specifications

Page 1 of 3
Questions or problems, please call Denon USA Customer Support @ 800-497-8921
ASD-3N/W FIRMWARE UPDATE AVAILABLE
There is now a firmware update available through our DPMS (Denon Product Management Server) for the ASD-3N
and ASD-3W Network Client iPod Docks – USA and Canada models only. These updates allow Denon to address
certain operating issues, as well as adding new features and functionality.
The update corrects the following issues:
1. The playback of Net Audio stops when a jpeg image is displayed.
2. When displaying a jpeg image, then selecting Net Audio, no audio is output.
3. Unit re-initializes when empty Video Podcast is selected from any iPod.
4. When Audio Book from an iPod is selected, another song is played.
5. The file of an artist that has not been selected is displayed when watching videos from the iPod.
6. When connecting the ASD-3N/W to compatible Denon AVRs with Dock Control, FF/REW from the remote
control and the iPod buttons do not function.
7. The ‘Slide Show’ function does not operate correctly.
8. GUI does not timeout when set to do so.
9. The FL display of Denon AVRs displays incorrect title information when connected via Dock Control in
Remote Mode.
10. WAV files with Japanese titles cannot be displayed.
11. ASD-3W cannot accept 26-bit WEP encryption key
12. Regarding new specifications of the new iPod nano 3G and iPod Classic, there is no video or photo output in
Browse or Remote Modes.
a. Latest firmware corrects video/photo playback in either mode, however Browse Mode still does not
function with material purchased from the iTunes Store due to bugs in the nano 3G and Classic –
awaiting update from Apple. NOTE: Apple has corrected this in the latest update (ver1.0.3) for the
iPod Classic and nano 3G. When syncing with iTunes you will be asked to update your unit, please
follow the update instructions within iTunes.
13. Regarding new specifications of the iPhone and new iPod Touch, there is no video or photo output in
Browse or Remote Modes.
a. Latest Firmware corrects Remote Mode playback, however Browse Mode does not work due to new
Apple specification and it is unknown if Apple will ever change this
14. Album Art from nano 3G and Classic is not displayed properly.
15. Units reset themselves with iPhone and iPod Touch when playback of Audio files with Album Art.
NOTE: See breakdown chart on page 3, regarding capabilities and functionality with Denon Docks and the new
Apple products.
To update the firmware, please follow the instructions below. These instructions are the same for all future firmware
updates regarding the ASD-3N/W:
1. Remove then replace the main AC power cord to the ASD-3N/W.
a. We recommend using an Ethernet cable for the updates with the ASD-3W, as Wi-Fi signal dropouts
and network usage can cause failure of the updating process.
2. With unit powered back on, verify Internet connectivity, this can be done by selecting Internet Radio and
accessing a station for playback.
a. If Internet Radio cannot be accessed, then check all network settings and connections.
3. In the ASD-3N/W GUI, select ‘Setup’ then ‘Other’. Now select ‘Firmware Update’, then ‘Start’, followed by
the ‘Enter’ key. An on screen confirmation will appear saying, “Now Updating. During the process, screen
will go blank for several minutes. Do not turn off.
a. The GUI will disappear, however the main power indicator on the front of the unit will remain on.