User Guide English (3–10) Guía del usuario Español (11–19) Guide d’utilisation Français (20–28) Guida per l’uso Benutzerhandbuch Appendix Italiano (29–37) Deutsch (38–46) English (47)
User Guide (English) Introduction Please see this guide’s Setup chapter to see an example of how to use Audio Commander and its accessories, and then refer to the Operation chapter to start using Audio Commander.
Features Front Panel 23 23 22 4 5 1 2 3 AUDIO 6 7 8 9 10 11 12 3 18 15 16 17 19 21 13 20 14 1. Master Volume: Adjust this knob to control the level for the master volume going to the Line Output. 2. Wireless Mic Volume 1: Adjust this knob to control the level for the wireless mic receiver 1. 3. Wireless Mic Volume 2: Adjust this knob to control the level for the wireless mic receiver 2. 4. USB/SD/BT Volume: Adjust this knob to control the level for the USB, SD, and Bluetooth sources.
23 16. 23 Previous Track: Press this button to go to the previous audio track from a Bluetooth, USB, or SD card source. 22 Note: When listening to Bluetooth sources, pressing this button may go to another playlist or music genre in some apps. 17. Play/Pause: Press this button to play/pause an audio track from a Bluetooth, USB, or SD card source. 18 15 Aux In 1 Volume: Adjust this knob to control the volume for the Aux 1 input.
Display 1 1. Input Sources 4 5 2. Power Charging Indicator 3. Battery Level 4. USB/SD Card Folder 5. USB/SD Card Track 6. Track Playback Time 2 3 6 Setup Items not listed under Introduction > Box Contents are sold separately. Note: Audio Commander can be operated while the waterproof cover is on.
Headset Microphone Setup Headset Microphone Beltpack Transmitter Power 7
Operation Wireless Microphone Setup To use a wireless microphone, follow these setup steps: 1. Ensure 2 new AA alkaline batteries are installed in the wireless microphone. 2. Pair the wireless microphone (found in the side compartment) to W. Mic Receiver 01 on Audio Commander. a. Turn on Audio Commander and the wireless microphone. b. Select a channel with the best reception using the Up/Down buttons on the receiver. c.
Playing Music from a USB Flash Drive 1. Connect your USB flash drive to the top USB port on the rear panel. 2. Press and release the Mode button until the USB device appears on the display screen. 3. Use the |<< and >>| buttons to scroll through your files and press Play to select the track to play. Playing Music from a SD Card 1. Insert a SD card into the card slot. 2. Press and release the Mode button until the SD card appears on the display screen. 3.
Pairing a Bluetooth Device Using NFC NFC (near-field communication) allows data exchange from devices, such as pairing, by gently bumping them together. Check in your device’s manual to see if this feature is supported. To use NFC to pair with Audio Commander: 1. In order to use NFC, your device must be turned on and unlocked. 2. Enter your device’s Settings menu and check that NFC is turned On. 3. Power on Audio Commander. 4. Press and release the Bluetooth button on Audio Commander. 5.
