Graphical User Interface Use this manual in combination with the operating guide displayed on the GUI screen. GUI Menu Operation (vpage 24) GUI Menu Map (vpage 25) Language (vpage 43) Remote Control Unit Operations (vpage 73) AV SURROUND PRE-AMPLIFIER AVP-A1HDCI Owner’s Manual AVPA1HDCIEU_0121.
SAFETY INSTRUCTIONS n SAFETY PRECAUTIONS 1. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC Information (For US customers) n NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION 1. COMPLIANCE INFORMATION Product Name: AV Surround Pre-Amplifier Model Number: AVP-A1HDCI This product contains FCC ID: BV2- MPGBR052. This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.
Contents Getting Started Accessories······················································································3 Cautions on Handling······································································3 Cautions on Installation··································································3 About the Remote Control Unit·····················································3 Inserting the Batteries································································3, 4 Operating Range of the Remot
Surround Mode HOME THX CINEMA······································································48 Surround Playback of 2-channel Sources······································48 Playing Multi-channel Sources (Dolby Digital, DTS, etc.)··············48 Standard Playback·········································································48 Surround Playback of 2-channel Sources······································48 Playing Multi-channel Sources (Dolby Digital, DTS, etc.
Getting Started Cautions on Handling • Before turning the power switch on Check once again that all connections are correct and that there are no problems with the connection cables. Getting Started Connections Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Setup Accessories Playback Check that the following parts are supplied with the product.
Part Names and Functions Getting Started NOTE For buttons not explained here, see the page indicated in parentheses ( ). Front Panel Q0 o i u Connections y Setup Playback Remote Control • Replace the batteries with new ones if the set does not operate even when the remote control unit is operated close to the unit. • The supplied batteries are only for verifying operation.
Getting Started GWith the door openH W9 W8 W7 W6 Display W5 W4 W3 W2 W1 W0 Q9 Q8 Q7 Q6 Q5 Q4 Q3 Q9 Q8 Q7 Q6 Q5 Q4 Q3 Q2 Q0 Q1 o i u y Connections Setup Playback q w er t y u Remote Control Multi-Zone Information Troubleshooting q DIRECT/STEREO button····························· (49) w Headphones jack (PHONES)················· (56, 70) e CINEMA button··········································· (48) r RESTORER button······································· (53) t MUSIC button·········
W1 i W0 Q9 Q8 Q7 Q6 Q5 Q4 Q3 Q2 Q1 Q0 o Getting Started Rear Panel i Connections Setup Playback Remote Control Multi-Zone W2 W3 W4 Information Troubleshooting q w q CONTROL LINK connector·························· (11) w RS-232C connector······································ (23) e Analog audio connectors (AUDIO)············ (14) r RCA PRE OUT connectors···················· (11, 22) t EXT.
Getting Started Remote Control Unit n Main remote control unit (RC-1067) Q5 Connections q Setup w Playback e Q6 Q7 q Signal transmission indicator···················· (73) w Mode select buttons··································· (73) e Quick select / System call buttons······ (72, 77) r Surround mode buttons·····················(48 ~ 50) t System buttons······································(74, 75) y Audio delay button (A.
Connections Cables Used for Connections Select the cables according to the equipment being connected. Audio cables Component video connections (Green) (Orange) (Y) (Blue) Coaxial digital (75 Ω/ohms pin-plug) cable (PB/CB) (Red) (PR/CR) Playback Optical digital connections Setup Component video cable (Green) Optical cable (Y) (Blue) BNC digital connections (PB/CB) (Red) Remote Control • Do not plug in the power cord until all connections have been completed.
Getting Started GFlow of video signals for ZONE3H Video Conversion Function ZONE3 Connections • This function automatically converts various formats of video signals input to the AVP-A1HDCI into the format used to output the video signals from the AVP-A1HDCI to a monitor.
The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and a monitor. Subwoofer Center speaker Setup POA-A1HDCI Connection and Operation Surround speakers Multi-Zone • For instructions for connecting speakers, please refer to the POA-A1HDCI owner’s manual. • When using just one surround back speaker, connect it to the left channel (SBL). Information Two surround back speakers are required to use the THX Ultra2 Cinema,THX Music mode and THX Games mode.
Getting Started Connections n Connecting the XLR pre-out terminal (Example : 9.3-channels) When using Subwoofer 2 or 3, set GUI menu “Manual Setup” – “Speaker Setup” – “Subwoofer Setup” (vpage 29). n Connecting the RCA pre-out terminal (Example : 9.
1 Connect AVP-A1HDCI and POA-A1HDCI with the control link cable. DVD player Monitor )%.* 065 )%.* */ When connecting 1 unit : “1” When connecting 2 units : 1st unit “1”, 2nd unit “2” Multi-channel linear PCM 8ch 32-192 kHz 16/20/24 bits DVD-Audio Dolby Digital, DTS Bitstream DVD-Video DSD 2/5.1ch 2.
Getting Started NOTE Connections Setup Playback Remote Control Multi-Zone Information • Use a CPPM-compatible DVD player to play DVD-Audio discs that are copyright-protected by CPPM. • The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted by the connected device. • Video signals are not output properly when using devices that are not HDCP-compatible. • Video signals are not output if the input video signals do not match the monitor’s resolution.
CD Player Turntable (MM cartridge) iPod® Connect the cables to be used. CD player "6%*0 "6%*0 065 3 $0"9*"065 Example : iPod L R L R Setup "6%*0 065 (/% "4% 3 R Playback L Connections 9-3 065 3 Use a DENON Control Dock for iPod (ASD-1R, sold separately) to connect the iPod to the AVP-A1HDCI. For instructions on the Control Dock for iPod settings, refer to the Control Dock for iPod’s operating instructions.
Getting Started TV/CABLE Tuner Satellite Receiver Connect the cables to be used. Connect the cables to be used. TV tuner DBS / BS tuner 7*%&0 Connections 7*%&0 065 4 7*%&0 065 $0.10/&/5 7*%&0 065 : 1# 13 "6%*0 015*$"065 7*%&0 "6%*0 065 3 7*%&0 065 4 7*%&0 065 $0.10/&/5 7*%&0 065 : 1# 13 "6%*0 )%.
Getting Started Connecting the Recording Components Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly. Connect the cables to be used. Digital video recorder 7*%&0 065 4 7*%&0 065 "6%*0 $0.10/&/5 7*%&0 065 : 1# 13 )%.
Getting Started Video Cassette Recorder CD Recorder / MD Recorder / Tape Deck Connect the cables to be used. Make analog connections if you wish to record analog audio signals, or digital connections if you wish to record digital audio signals, depending on the types of connectors on the components being used. Video cassette recorder 7*%&0 Connections 4 7*%&0 065 "6%*0 7*%&0 065 "6%*0 065 3 Setup L Playback L R R 015*$"065 7*%&0 )%.
Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly. Video Camera / Game Console Video camera / Game console 7*%&0 4 7*%&0 065 DVD player / Super Audio CD player / External decoder "6%*0 46# 800'&3 '30/5 - L R L R 3 $&/5&3 463306/% - 3 463306/% #"$, - 3 L R L R L R L R L R L R Playback DVD player 015*$"065 Setup Multi-channel playback is possible with DVD-Audio discs, Super Audio CD, etc.
Getting Started USB Port n Front panel USB memory device XM connector n Rear panel USB memory device Connections Setup Playback • The AVP-A1HDCI is an XM Ready® receiver. You can receive XM® Satellite Radio by connecting to the XM Mini-Tuner and Home Dock (includes home antenna, sold separately) and subscribing to the XM service. • Plug the XM Mini-Tuner and Home Dock into the XM connector on the rear panel. • Position the Home Dock antenna near a south-facing window to receive the best signal.
HD Radio broadcast is a service that is only available within the United States. An F-type FM antenna cable plug can be connected directly. Direction of broadcasting station AM/FM FM antenna AM loop antenna (small, supplied) (White) 75 Ω/ohms Coaxial cable Playback 75 Ω/ohms Coaxial cable (Black) Setup (White) FM antenna Connections Direction of broadcasting station AM loop antenna (large, for HD Radio broadcasting, supplied) • To prevent interference, install at least 3.
Getting Started Required system Network Audio n Broadband Internet connection A broadband line connection to the Internet is required in order to use the AVP-A1HDCI’s Internet radio function and firmware update. [Wired LAN] Connections Modem Computer Internet n Modem This is a device that is connected to the broadband line to communicate with the Internet. Some are integrated with the router.
ZONE2 or ZONE3 Pre-out Connections Monitor 7*%&0 "6%*0 7*%&0 */ 4 7*%&0 */ $0.10/&/5 7*%&0 */ : 1# 13 7*%&0 "6%*0 7*%&0 */ "6%*0 */ 3 R L R L R L R "6%*0 "6%*0 015*$" */ 015*$" */ Multi-Zone L AV amplifier (ZONE4) Remote Control "6%*0 */ 3 Monitor Power amplifier AV amplifier (ZONE2) Playback ZONE3 The AVP-A1HDCI is equipped with Optical output connectors for ZONE2 and ZONE4. If a bit-stream amp is rigged-up, these zones can also be used to enjoy home theater.
Getting Started Connecting the Power Cord External Controller Wait until all connections have been completed before connecting the power cord. Connections Power cord (included) RS-232C connector To household power outlet (AC 120 V, 60 Hz) Setup This connector is used for an external controller. Playback b If you use an external controller to operate the unit via the RS-232C terminal, you must confirm the following beforehand. q Turn on the AVP-A1HDCI’s power.
GUI Menu Operations Switch to the next item Selected item name Example: Menus with Illustrations (Auto Setup) Operation guidance text Operation step indicators 7.1 5.1 The same operation is possible on the main unit or remote control unit. STEP1 Speaker Detection Please place the microphone at ear height at main listening position. 1 2 3 4 5 Illustration 1 Press the MENU button. 2 Press the u i p button to select the menu to be set or operated.
Getting Started GUI Menu Map Information (vpage 54, 55) Connections Setup n Status • MAIN ZONE • ZONE2/3/4 n Audio Input Signal n HDMI Information n Auto Surround Mode n Quick Select n Preset Station Source Select (vpage 43 ~ 47) n TUNER (FM/AM) • Play • Auto Preset • Preset Skip • Preset Name • Video · Video Select · i/p Scaler · Resolution • Input Mode • Rename • Source Level n PHONO • Video · Video Select · i/p Scaler · Resolution • Input Mode • Rename • Source Level • Input Att.
1 Auto Setup Connect the included calibrated setup microphone to the SETUP MIC jack on the main unit. The “Auto Setup” screen appears automatically. Auto Setup Getting Started Preparations Optimize settings for speakers in use. F Menu tree F a Auto Setup Sound receptor s Option d Parameter Check a Auto Setup Playback 2 Place the microphone at ear height on a tripod or stand with the microphone pointing directly up towards the ceiling. Setup The settings are performed automatically.
Getting Started Start Pre-out Assign Connections Start Auto Setup. The Audyssey MultEQ XT Auto Setup process automatically calculates the size, level, distance, bass management crossover frequency, and optimal settings for each speaker and subwoofer. Audyssey MultEQ XT corrects acoustical distortions within the listening area. Before starting, connect and position all your speakers. Once started, MultEQ XT will play a series of test tones through each speaker.
s Option If the auto setup procedure could not be completed due to speaker installation, the measuring environment, etc., an error message is displayed. If this happens, check the relevant items, be sure to take the necessary measures, then perform the auto setup procedure over again. Select settings for room EQ, mic, etc. Getting Started Error Messages Room EQ No microphone or speaker Cause • Included setup microphone is not connected.
Getting Started Subwoofer s Subwoofer Setup Select subwoofer use. [Selectable items] Manual Setup Connections Make detailed settings for various parameters No Surround A Configuration Select surround speakers A use and size. Select number of subwoofers and configuration. [Selectable items] Large [Selectable items] Small None Use this procedure to set the speakers manually or if you wish to change the settings made with the auto setup procedure.
f Channel Level Set distance from listening position to speakers. Before making the settings, measure the distance from the listening position to the different speakers. Adjust channel levels to obtain equal volume from all speakers. Mode [Selectable items] Auto Step Surround Select step. (smallest distance) Select surround speaker from which test tone is output. [Selectable items] [Selectable items] 1ft 0.1m 0.1ft : Can be selected when “Feet” is set. 0.
Getting Started Connections Setup Playback • Please set all THX Certified speakers, set the “Speaker Configuration” for all speakers to “Small”. We recommend using with the crossover frequency set to “FIXED–THX–”, but depending on the speaker, setting it to a different frequency may improve frequency response near the crossover frequency.
Make settings for HDMI video/audio output. f Audio h HDMI Control Select HDMI audio output device. Make settings for HDMI control function. [Selectable items] Amp F Menu tree F Getting Started Connections HDMI Setup Control TV Set HDMI control function to ON/OFF. Manual Setup HDMI Setup GUI menu “HDMI Control”- “Control” is “ON”, the “Amp” and “TV” will switch with the operation of any television not related to this setting.
Getting Started Surround Speaker Audio Setup s 2ch Direct/Stereo Select the surround speakers to use. Make settings for audio playback. [Selectable items] A B Make speaker settings for 2-channel mode playback. A+B Setting F Menu tree F Connections Manual Setup • This can be set when “Mode” is set to “Analog”. • This can be set when GUI menu “Speaker Setup” – “Speaker Configuration” – “Surround A” and “Surround B” are used (vpage 29). Audio Setup a EXT.
g Manual EQ Set dynamic range for downmix playback of Dolby Digital sources. Adjust tonal quality for each speaker using graphic equalizer. [Selectable items] ON OFF Getting Started d Downmix Option Adjust CH [Selectable items] Each [Selectable items] ON OFF 500Hz 1kHz 2kHz 4kHz 8kHz 16kHz [Variable range] –20dB ~ 0dB ~ +6dB Curve Copy Copy the Room EQ’s “Audyssey Flat” correction curve.
Getting Started Network Setup Make network settings. F Menu tree F Connections Manual Setup a Network Setup Make settings for wired or wireless LAN. Wired LAN settings Make settings for wired LAN. Network Setup Turn on the AVP-A1HDCI’s power. a Network Setup s Other If a Ethernet cable is connected Setup d Network Information The mode automatically switches to “Wired”.
Getting Started Wireless LAN settings Make settings for wireless LAN. Turn on the AVP-A1HDCI’s power. Connection Connections If no Ethernet cable is connected The mode automatically switches to “Wireless”. Display GUI menu “Manual Setup” – “Network Setup” – “Network Setup”. To enter the IP address manually Setup To acquire the IP address automatically using the DHCP function Playback Access point settings To set manually Search If searching is not possible q Input the SSID.
Getting Started Rhapsody Account s Other Make setting for amp power save mode and computer language environment. Set or change Username and Password. “Listening to Rhapsody“ (vpage 00) n Enter username : Username Connections Power Saving ON [Selectable items] Manual Setup Zone Setup a~z A~Z 0~9 OFF Setup d OSD Playback Remote Control Multi-Zone PC Language a ZONE2 a~z A~Z 0~9 Set the character code type of the MP3 ID3-Tag played by USB. Latin ! “ # $ % & ( ) * + , - .
Power On Level Adjust the left channel output level. Define the volume setting that is active when the power is turned on. [Variable range] –12dB ~ 0dB ~ +12dB [Selectable items] Last – – –dB –70dB ~ 18dB Rch Level Mute Level Adjust the right channel output level. Set the amount of attenuation when muting is on. Full f Volume Control –40dB –20dB g Source Delete h GUI Automatically convert video input signal to ZONE2 monitor output format.
Getting Started a Pre-out Assign s XLR Out Polarity Change the pre-out assignment. Set to switch the XLR pre-out terminal polarity. Setting “Free Assign” allows you to freely assign each pre-out to any channel, depending on the environment used.
Mute Level Set POA-A1HDCI for which the MODE select switch is set to “1” or “2”. This sets the amount of attenuation of the volume when the mute mode is set in the MAIN ZONE. [Selectable items] Operating from the main unit Full –40dB –20dB n Input Selector g Source Delete Select the setup channel.
Getting Started Setting with Respect to the Monitor k Trigger Out 1 Connections Select the conditions to turn on the trigger out 1 with respect to the zone, input source, surround mode, HDMI monitor, etc. For details about the trigger out function, see page 23. When the HDMI monitor set to on is selected, the trigger out turns on.
S0 Add New Feature This sets the function for maintenance by a DENON serviceperson or installer. (For professional use only.) Display the new functions which can be purchased for downloading to the AVP-A1HDCI and upgrade. This function allows a DENON serviceperson or installer to check the AVP-A1HDCI’s status and make settings via the Internet. When you purchase a new function and register your user information, “Registerd” is displayed on this menu and you can proceed with the upgrade.
Getting Started Operating from the main unit or main remote control unit Language Select the language displayed on the GUI screen. Source Select F Menu tree F Connections Manual Setup Use this procedure to select the input source and make the settings related to playing input sources. Language [Selectable items] English Français Setup Operating from the main unit Playback Remote Control b The GUI menu is not displayed when performing this setting.
a Play d Preset Skip Source Select A~G Select the preset channel(s) you do not want to display. g Video a Play [Input source] h Input Mode s Auto Preset j Rename d Preset Skip HD Radio g Video 2 [Selectable items] All 1 [Selectable items] ON Skip f Preset Name j Rename j Rename z : “Play” and “Playback Mode (iPod)” are displayed for input sources for which “iPod dock” is assigned. a Playz A1 ~ G8 Select the preset memory number.
Getting Started Resolution Operating from the main unit Press the VIDEO SELECT button, then turn the SOURCE SELECT knob until the desired picture appears. b To cancel, press the main unit’s VIDEO SELECT button, then turn the main unit’s SOURCE SELECT knob and select “SOURCE”. h Input Mode Set resolution for video signal output to HDMI. [Selectable items] Auto 480p/576p 1080i 720p 1080p Connections Operating from the main unit NOTE Setup • It is not possible to select HDMI input signals.
A0 Playback Mode (iPod) Set the decode mode for this source. [Input source] CD DVD HDP TV/CBL SAT PCM DVR-1 DVR-2 V.AUX DTS Repeat Make settings for repeat mode. [Input source] CD DVD HDP A ~ Z a ~ z 0 ~ 9 ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space) [Selectable items] All One NOTE OFF This cannot be set for input sources for which “iPod dock” is assigned. Shuffle Digital Make settings for shuffle mode. Select digital input connector to assign to this source.
Getting Started Component iPod dock Select component video input to assign to this source. Assign Control Dock for iPod to this source. [Input source] DVD HDP A3 Still Picture Make settings for still picture (JPEG) playback. [Input source] TV/CBL SAT VCR DVR-1 DVR-2 V.AUX TV/CBL SAT VCR DVR-1 DVR-2 Connections Input source Default setting DVD 1-RCA HDP 2-RCA TV/CBL 3-RCA SAT 4-RCA Setup V.
Dolby Digital Source Surround Mode DTS Surround Source [Selectable items] PLg CINEMA Pro Logic NEO:6 CINEMA Playing Multi-channel Sources (Dolby Digital, DTS, etc.) HOME THX CINEMA : For details, see page 91. Operating from the main unit or main remote control unit DOLBY PLgx or DOLBY PLg DOLBY PLg DTS NEO:6 neural : The signals are decoded in DOLBY PLgx or DOLBY PLg for playback. Cinema : This mode is suited for movie sources. Music : This mode is suited for music sources.
Getting Started Playing Multi-channel Sources (Dolby Digital, DTS, etc.) [Selectable items] Connections STANDARD : This mode is for decoding the input signals according to their format and playing surround sound. The display when the STANDARD mode is selected depends on the input signal and surround back output playback mode. Setup Input signal Playback Remote Control DOLBY DIGITAL (other than 2ch) / DOLBY DIGITAL EX DOLBY DIGITAL Plus DOLBY TrueHD Dolby Digital Source Multi-Zone DTS (5.
Direct Playback This is the mode that recreates the original sound most faithfully, providing extremely high quality sound. [Selectable items] DIRECT : Input signal F Menu tree F Parameter Audio DSD DIRECT (z) MULTI CH DIRECT M DIRECT + PLgx CINEMA M DIRECT + PLgx MUSIC M DIRECT 7.1 DSD MULTI DIRECT (z) a Surround Parameters s Tone d Room EQ f Dynamic EQ g RESTORER Multi-Zone DSD (multi ch) Audio Adjust various audio parameters.
Getting Started n In the THX mode (for 2-channel sources) [Selectable items] Surround Back ON Surround Back OFF THX Games Mode DRC Dimension Compress dynamic range (difference between loud and soft sounds). Shift sound image center to front or rear, to adjust playback balance. [Selectable items] Auto [Variable range] Low Middle High OFF n In the THX mode (for Multi-channel sources) Connections ES DSCRT ES MTRX 7.
Input Channel Bass Auto-select surround mode by source. This function only works for software containing a special identification signal. If the software being played is recorded in Dolby Digital EX or DTS-ES, it is played in 6.1-channels. If not, it is played in 5.1-channels. Select channel using external input connectors (EXT. IN) for source being played. Adjust bass for all channels together.
Getting Started Subwoofer Adjust each subwoofer channel tone. [Selectable items] Bass –6dB ~ +6dB [Variable range] Connections Setup • This can be set individually for the separate surround mode other than PURE DIRECT, DIRECT and Home THX Cinema mode. • When “Dynamic EQ” is set to “ON”, you cannot use the “Tone” setting (vpage 90). • “Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can be selected after the auto setup procedure has been performed.
s Brightness Compensate for mismatched timing between video and audio. Adjust picture brightness. Delay audio. This sets the delay time for audio signals. [Variable range] 0 ~ Getting Started j Audio Delay Information +12 Connections ~ 200 ms [Variable range] 0 ms d Chroma Level b The GUI menu is not displayed when carrying out this setting. [Variable range] –6 ~ ~ 0 Shows information about current settings. +6 F Menu tree F Information f Hue Status a MAIN ZONE Adjust color hue.
Getting Started Audio Input Signal HDMI Information Quick Select Shows information about audio input signals. Shows information about HDMI input/output signals and monitor. Shows information about “Quick Select” settings. F Menu tree F F Menu tree F F Menu tree F Connections Information Information Quick Select a Signal Information [Items to be checked] Quick Select 1 s Monitor1 Setup Surround Mode : The currently set surround mode is displayed.
Turning Off the Sound Temporarily (Muting) MASTER VOLUME Playback Turning the Power On AMP] Press or [POWER ON]. The sound from the pre-out connectors is automatically cut. NOTE Be careful not to set the volume too high when using headphones. The power indicator flashes green and the power turns on.
Getting Started
Auto tuner presets B1 ~ B8 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz, 90.1 / 90.1 MHz C1 ~ C8 90.1 MHz Radio Text (RT) D1 ~ D8 90.1 MHz E1 ~ E8 90.1 MHz F1 ~ F8 90.1 MHz G1 ~ G8 90.1 MHz RT allows RDS stations to send text messages that appear on the display. NOTE The operations described below using [SEARCH] will not function in areas in which there are no RDS broadcasts. PTY identifies the type of RDS program.
Getting Started TP Search Use this function to find RDS stations broadcasting traffic programs (TP stations).
3 Use [d f] to select the station. (vpage 73 “Remote Control Unit Operations”) When the station is tuned in, the name of the track and artist are displayed. Status Signal strength is good Signal strength is marginal Signal strength is weak No signal Adjust the position of the antenna until “SIGNAL: GOOD” is shown on the display. Press until the station you want to check (example: “XM001”) is displayed. Press [d f] and select channel 0 (XM000). The radio ID is shown on the display.
Getting Started Listening to HD Radio™ Stations HD Radio stations offer higher sound quality than conventional FM/AM broadcasts. It is also possible to receive data services and select broadcasts from among up to eight multicast programs. Basic Operation 1 : “Source Select” (vpage 43) Connections Using the HD Radio Receiver Setup HD Radio technology provides higher quality sound than conventional broadcasts and allows reception of data services.
An HD Radio broadcast includes up to 8 audio programs (HD1 to HD8 and Analog). The different audio programs also have data programs. iPod® Playback The music on an iPod can be played by using the Control Dock for iPod (ASD-1R, sold separately). The operation can also be performed using the buttons on the main unit or remote control unit while watching the GUI menus. If the station you are listening to has multiple audio programs, “HD1” is indicated on the display.
Getting Started Shuffling playback Press [CHANNEL +] or [RANDOM] on the sub remote control unit. [Selectable items] Albums Songs uio p ENTER OFF This procedure can be used to play Internet radio stations or music or still picture (JPEG) fi les stored on a computer or USB memory device or Rhapsody. : ”Source Select” – “(input source)” – Connections Setup ”Playback Mode (iPod)” – “Shuffle” (vpage 46) Searching up or down pages Press [SEARCH], then press o (down) or p (up).
Still picture (JPEG) files stored in folders on a media server can be played as slide shows. The time for which each picture is displayed can be set. Still picture (JPEG) files stored on USB memory devices can be played as slide shows. The time for which each picture is displayed can be set. When still picture (JPEG) files are played on the AVP-A1HDCI, they are played in the direction in which they are stored in the folder, so store in them in the direction in which you want them to play.
Getting Started ENTER uio p To pause Basic Operation 1 Make the necessary preparations. Connections q Check the network environment, then turn on the AVP-A1HDCI’s power. (vpage 21 “Network Audio”) w If settings are required, make the network settings. (vpage 35 ~ 37 “Network Setup”) e Prepare the computer. (vComputer’s operating instructions) Install “Windows Media Player ver. 11”.
The station list is displayed. Playback starts once buffering reaches “100%”. Preset Internet radio stations can be selected directly. Favorites are listed at the top of the menu screen, so when a station is registered as a favorite it can be tuned in easily. 1 2 3 While the Internet radio station you want to preset is playing, press [MEMO]. Use ui to select “Preset”, then press ENTER. Press [A ~ G], then press [1 ~ 8] to select the desired preset number. The Internet radio station is now preset.
Getting Started Playing Files Stored on a Computer Use this procedure to play music files, image files or playlists. Connections 1 2 Setup 3 4 ui p ENTER Playback Remote Control [ NET/DTU] ( Use ui to select “Media Server”, then press ENTER or p. Use ui to select the host name of the computer on which the music file you want to play is located, then press ENTER or p. Use ui to select the search item or folder, then press ENTER or p. Use ui to select the file, then press ENTER or p.
NOTE • The password should be no longer than 99 characters. • The password may not contain underscores ( _ ). Search From Rhapsody Latest Information Use ui to select the track, then press ENTER or p. After selecting, the information is displayed. Listening to Rhapsody Preparations Use ui to select “Rhapsody”, then press ENTER or p. n Username : [Input characters] a~z A~Z 0~9 ! “ # $ % & ( ) * + , - .
Getting Started SOURCE SELECT Surround mode INPUT MODE Other Operations and Functions Connections Other Operations Setup Playing Super Audio CD Playback 1 REC SELECT> Remote Control [ Either turn or press [SOURCE to select the input source assigned in step 1.
Convenient Functions HDMI Control Function Setup Dolby Headphone recording )%.* 065 Television compatible with HDMI control function "6%*0 "6%*0 065 3 L R L R 015*$"065 )%.* */ Select the parameters and set the desired mode. Start recording. Refer to the “Dolby Headphone” (vpage 49).
Getting Started Operations QUICK SELECT Connections Setup Playback CH SELECT uio p 1 Connect the HDMI to the AVP-A1HDCI with equipment compatible with the HDMI control function. 2 3 Put the power on for all the equipment connected to the HDMI. b Please consult the operating instructions for the connected equipment to check the settings. b Operations 1 ~ 3 do not have to be repeated once started.
Quick Select Function Last Function Memory You can adjust the channel level either according to the playback sources or to suit your taste, as described below. With this function, the currently playing input source, input mode, surround mode, room EQ settings and volume can be stored in the memory. This stores the settings as they were directly before the standby mode was set. When the power is turned back on, the settings are restored to as they were directly before the standby mode was set.
Getting Started Operating DENON Audio Components Remote Control Unit Operations 1 Connections Main Remote Control Unit Setup Playback • On the main remote control unit, the display switches according to the device being operated and the mode. • In modes other than iPod, the mode switches between“ ” and “ ” each time the [MODE SELECTOR] is pressed.
Getting Started Functions of Buttons by Component EL Display EL Display Device Mode Device operated 1 8 9 6 7 DVD (Default setting) Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) CD Recorder VCR TAPE iPod Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) CD (Default setting) Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) Playback Auto search (cue) Manual search (
Getting Started EL Display EL Display [MODE SELECTOR] Connections Setup [MENU] Playback [SETUP] MODE SELECTOR [1], [8 9], [6 7], [3], [2], [SOURCE ON], [SOURCE OFF] [ENTER] [uiop] [DISPLAY] Remote Control [CH +/–] [0 ~ 9, +10] [TV/VCR] Multi-Zone Buttons Information [MODE SELECTOR] Device operated 1 8 9 6 7 3 2 SOURCE ON SOURCE OFF TV (HITACHI) TV (SONY) SAT SAT Punch through Punch through Punch through Punch through Power on Power off Power on Power off Power on Power off MENU u
[ [MODE SELECTOR] [ iPod] TUNER AMP (MAIN) Remote ID NET/DTU iPod (Analog TUNER) (XM) 52863 52864 (Net Audio) (HD Radio) 72815 62865 62840 81001 2 82001 52795 52812 72816 62837 62841 3 83001 52800 52813 72817 62838 62842 4 84001 52805 52814 72818 62839 62843 Point the main remote control units directly at each other and press and hold the button on the other device’s remote control unit that you want to learn.
System Call Function Getting Started Signal transmission indicator [ AMP] Connections [MODE SELECTOR] [SYSTEM CALL] This function lets you register a series of operations at a single button. For example, the amplifier can be turned on, the input source selected, the monitor’s power turned on, the source device’s power turned on and the play mode set all by pressing a single button. Up to 32 signals each can be registered at [SYSTEM CALL] (1, 2 or 3).
The signal transmission indicator flashes twice. Press [9], [7] and [3], in that order. The signal transmission indicator flashes twice and the backlight on time setting mode is set. Set the light on time. The signal transmission indicator flashes twice. GResetting button by buttonH 1 2 3 4 Press [MODE SELECTOR] for the device you want to reset. Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice. Press [9], [7] and [6], in that order.
Getting Started Sub Remote Control Unit Operations Connections Setup Playback • The sub remote control unit is equipped with frequently used buttons, so it can be used for simple remote control unit operations. • The sub remote control unit can also be used for multi-zone, so you can use it to control the AVP-A1HDCI from other rooms. • The operations listed below can be performed with the sub remote control unit.
SHIFT iPod M Z2 Z3 Z4 Zone operation mode selection Power turned off (b1) Power turned on (b1) Input source selection (b2) Preset channel selection M Z2 Z3 Z4 Zone operation mode selection Power turned off (b1) Power turned on (b1) Input source selection – – – – – – – – – Page forward screen / Character search – RETURN 8 9, TUNING d f 2 1/3 – File operations – Channel selection – Track search – Stop Play/pause – – 1-track/all-track repeat play – b3 – Stop Play/pause 1-track/all-track r
Getting Started Multi-zone indicator Connections [ZONE OFF] [ZONE SELECT] [ADVANCED SETUP] Setup Playback Remote Control Multi-Zone [ALL MUSIC/ FAVORITES] [USB] Information Switching Zones Troubleshooting Use this procedure to select the zone to be operated by the sub remote control unit. 1 2 SELECT] We recommend always using the sub remote control unit for the same room. When this is done, the unit can be set so that the zone does not switch when buttons are operated.
Getting Started Multi-Zone Connections and Operations Connections Multi-Zone Connections Setup • For ZONE2, it is necessary to set in sequence with the signal connected to either the power amplifier or bit stream amps. The amp should be the power amplifier in the case of ZONE3, and the bit-stream for ZONE4. • If the signal inputted to ZONE2 is analog, change to PCM(2-channel) signal, and output it from ZONE2 optical output connectors.
Getting Started SOURCE SELECT VOLUME Multi-Zone Operations Turning the Power On and Off GOperation on the main unitH Connections Press , or for the zone to be operated. When the power turns on, the multi-zone indicator lights on the display. GOperation on the remote control unitH Setup In the zone mode you want to operate, press [ON] or [OFF].
'- Other Information $ 4- DI '3 43 DI Surround back speakers $ '3 Number of surround back speakers 43 DI Movement of acoustic image from SR to SL Below we introduce examples of speaker layouts. Refer to these to arrange your speakers according to their type and how you want to use them. G1H For THX surround EX systems (Using surround back speakers) q When mainly playing movies Recommended when your surround speakers are single or 2-way speakers.
Getting Started Connections w Setting for primarily watching movies using diffusion type speakers for the surround speakers For the greatest sense of surround sound envelopment, diffuse radiation speakers such as bipolar (THX) types, or dipolar types, provide a wider dispersion than is possible to obtain from a direct radiating speaker (monopolar). Place these speakers at either side of the prime listening position, mounted above ear level.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. DTS-ES™ Discrete 6.1 DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format adding a surround back (SB) channel to the DTS digital surround sound. Decoding of conventional 5.1-channel audio signals is also possible according to the decoder. DTS-ES™ Matrix 6.1 DTS-ES™ Matrix 6.1 is a 6.
Getting Started Connections Setup Playback Timbre Matching™ THX Ultra2 Cinema Boundary Gain Compensation The human ear changes our perception of a sound depending on the direction from which the sound is coming. In a movie theater, there is an array of surround speakers so that the surround information is all around you. In a home theater, only two speakers located to the side of your head are used.
Troubleshooting ®, HDCD®, High Definition Compatible Digital® and Microsoft® are either registered trademarks or trademarks of Microsoft Corporation, Inc. in the United States and/or other countries. HDCD system manufactured under license from Microsoft Corporation, Inc. This product is covered by one or more of the following: In the USA: 5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531, and in Australia: 669114. Other patents pending.
Getting Started HDMI (High-Definition Multimedia Interface) Connections Setup HDMI is a digital interface standard for next generation TVs based on DVI (Digital Visual Interface) standards and optimized for use in consumer equipment. Non-compressed digital video and multi-channel audio signals are transmitted with a single connection.
PRO LOGIC g/gx MUSIC mode only Surround Mode Mode Decoder Room Size Effect Level Delay Time Subwoofer EXT. IN only Center Width Center Image Subwoofer Att.
Getting Started Differences in Surround Mode Names Depending on the Input Signals Input signals Button Surround mode Note Connections WMA (Windows LINEAR Media Audio) ANALOG PCM / / MP3 / WAV MPEG-4 AAC / FLAC DTS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DOLBY DIGITAL DTS (5.1ch) DTS 96/24 DOLBY DIGITAL EX (With Flag) DVD-AUDIO DOLBY DOLBY DOLBY DOLBY DVDDIGITAL EX DIGITAL DIGITAL DIGITAL Audio (With no (5.
Surround mode Note DTS DOLBY DIGITAL DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY DIGITAL EX (With Flag) DVD-AUDIO DOLBY DOLBY DOLBY DOLBY DVDDIGITAL EX DIGITAL DIGITAL DIGITAL Audio (With no (5.
Input signals Getting Started Button Surround mode Note LINEAR ANALOG PCM / WAV Connections WMA (Windows Media Audio) / MP3 / MPEG-4 AAC / FLAC DTS DOLBY DIGITAL DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DVD-AUDIO DOLBY DOLBY DOLBY DOLBY DOLBY DVDDIGITAL EX DIGITAL EX DIGITAL DIGITAL DIGITAL Audio (With Flag) (With no Flag) (5.
Windows Media Player ver.11 About Wireless LAN Wi-Fi® Wi-Fi Certification assures tested and proven interoperability by the Wi-Fi Alliance, a group certifying interoperability among wireless LAN devices. IEEE 802.11b This is one wireless LAN standard set by the 802 working group that establishes LAN technology standards at the IEEE (Institute of Electrical and Electronics Engineers) of the United States. It uses the 2.
Getting Started WPA (Wi-Fi Protected Access) This is a security standard established by the Wi-Fi Alliance. In addition to the conventional SSID (network name) and WEP key (network key), it also uses a user identification function and encrypting protocol for stronger security. Connections WPA2 (Wi-Fi Protected Access 2) This is a new version of the WPA established by the Wi-Fi Alliance, compatible with more secure AES encryption.
n MAIN ZONE Video Convert b b b b b b b b b b b b b b Monitor output COMPONENT S-VIDEO VIDEO VIDEOz1 S-VIDEOz1 S-VIDEOz1 COMPONENT COMPONENTz1 COMPONENTz1 COMPONENT COMPONENTz1 COMPONENTz1 COMPONENT COMPONENTz1 COMPONENTz1 COMPONENT COMPONENTz1 COMPONENTz1 VIDEOz1 z5 S-VIDEOz1 S-VIDEOz1 A A COMPONENTz1 VIDEOz1 z5 A COMPONENTz1 S-VIDEOz1 S-VIDEO COMPONENTz1 S-VIDEOz1 S-VIDEO COMPONENTz1 VIDEOz1 z5 S-VIDEOz1 S-VIDEOz1 A A COMPONENTz1 VIDEO z1 z5 VIDEO COMPONENTz1 S-VIDEOz1 S-VIDEO COMPONENTz1 S-VIDEOz1
Getting Started Video Convert Connections Setup OFF Input signal Monitor output (Normally) Monitor output (when GUI menu displayed) Playback Remote Control HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO A A A A A A A A S S S S A A A S A A A S (VIDEO) S S S S A A S A A A S (S-VIDEO) A S S S S A A S S A A S (S-VIDEO) S (VIDEO) S S S S A S A A A S (COMPONENT) A A S S S S A S A S A S (COM
Monitor output S-VIDEO VIDEO COMPONENT S-VIDEO VIDEO OFF – – – Used Not used – – – Used Not used A A A A A S S S S S A A S S S A A S S S A S A S S A S A S S A A A A A S (COMPONENT) S (COMPONENT)z1 S (COMPONENT)z2 S (COMPONENT)z2 S (COMPONENT)z1 A A S (S-VIDEO) S (S-VIDEO) – A S (VIDEO) A S (VIDEO)*2 S (VIDEO) A A S (S-VIDEO) S (S-VIDEO) – A S (VIDEO) A S (VIDEO)*2 S (VIDEO) Output present No output With On-screen display, the VIDEO signal is superimposed output.
Getting Started Symptom Power turns off suddenly and power indicator flashes red. Troubleshooting Connections Setup If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.
Symptom No sound is produced from center speaker. 48 ~ 50 – • Adjust the subwoofer’s volume to an appropriate level. • Set to the “STANDARD” (Dolby/ DTS Surround) or “HOME THX CINEMA” mode. – 48 No picture appears with HDMI connections. – 46 • The connections between the AVP-A1HDCI and monitor are faulty. • The monitor’s input setting is wrong. • PURE DIRECT mode is set.
Getting Started GiPodH Symptom iPod cannot be played. Cause Countermeasure Connections • The input source assigned to • Switch to the input source “iPod dock” is not selected. assigned at “iPod dock”. • Cable is not properly connected. • Reconnect. • Control Dock for iPod’s AC • Plug the Control Dock for iPod’s adapter is not connected to AC adapter into a power outlet. power outlet.
Stops in the middle of playing. • Cannot be A1HDCI. b Need full account. with AVP- • Delete from “PC Application”. 64, 68 64, 68 – Played sound is interrupted or sound cannot be played. Page 35, 36 – – – – GXM Satellite RadioH done with AVP- • Delete from “PC Application”. b Need full account. – Symptom “CHECK XM TUNER” is displayed in the XM mode. Page 19 19 Troubleshooting “CHECK ANTENNA” is displayed in the XM mode.
Getting Started GXM Satellite RadioH Symptom “LOADING” is displayed in the XM mode. Connections Setup “NO SIGNAL” is displayed in the XM mode. Playback Remote Control “OFF AIR” is displayed in the XM mode. “UP DATING” is displayed in the XM mode. Multi-Zone Information “XM - - - ” is displayed in the XM mode. Troubleshooting Cause Countermeasure • The XM Mini-Tuner is acquiring • This message should disappear audio or program information in a few seconds in good signal from the XM satellite signal.
[FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) 87.5 MHz ~ 107.9 MHz 1.0 µV (11.2 dBf) MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) MONO 77 dB STEREO 72 dB HD 85 dB MONO 0.2 % STEREO 0.3 % HD 0.01 % [AM] 530 kHz ~ 1710 kHz 20 µV Connections Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N (IHF-A): Total harmonic Distortion (at 1 kHz): Getting Started n HD Radio section 85 dB 0.
List of preset codes Denon Amp D Denon 81001, 82001, 83001, 84001 G Denon Tuner D Denon (Analog) Denon (XM Radio) 52863, 52795, 52800, 52805 52864, 52812, 52813, 52814 Denon Digital Tuner D Denon (NET) Denon (HD Radio) 62865, 62837, 62838, 62839 62840, 62841, 62842, 62843 I J Denon iPod D Denon 72815, 72816, 72817, 72818 Cable A B C D E F A-Mark ABC Accuphase Acorn Action Active ADB Aichi Denshi Americast Amstrad Archer Auna Austar BCC Bell South Bestlink Birmingham Cable Communication
U V W Teac Technics Techwood Thomson Thorens Thule Audio Tokai Universum Victor Wadia Wards Y Yamaha Yorx 40490, 40393, 40420 40029, 40303 40303 40053 40157 40157 40420 40157, 40053 40072 40393 40000, 40032, 40157, 40053, 40087, 40179 40490, 40868, 40032, 40036 40000 CD Recorder D J R S T Denon JVC RCA Sony Teac Thomson 40766, 42868 40072 40053, 40420 40000, 40100, 41364 40420 40053 C D F G H I J K L M O Aiwa Akai Arcam Audiolab Carver Denon Fisher Garrard Genexxa GoldStar Grundig Harman/Kardon I
F G H Eurocrypt EuroLine Europa Europhon Eurosky Eurostar Eutelsat Expressvu Fenner Ferguson Finlandia Finlux Flair Mate FMD Force Fortec Star 00455 01251 00863 00299 00262, 00299 00818 00713 00775, 01775 00713 00455, 01291, 01743 00455 00455 00713 01251, 01413, 01457 01101 01083 00455, 00497, 00795, 00879, Foxtel 01162, 01176, 01356 Fracapro Planet 00871 Fracarro 00125, 00871 France Telecom 00871 Freesat 00882 FTE 00863 FTEmaximal 00713, 00863 00173, 00262, 00299, 00394, Fuba 01214, 01251, 01801 Fug
Satstation Schaub Lorenz Schneider 01083 01214 00710, 01206, 01251 00394, 00504, 00863, 01075, Schwaiger 01083, 01111, 01317, 01334, 01412, 01457 SCS 00299 Sedea Electronique 00125, 01206, 01283, 01626 SEG 01075, 01087, 01251, 01626 Seleco 00871 Septimo 01375 Serd 01412 Serino 00610 Servimat 01611 ServiSat 00713, 01251 Sharp 01517 Siemens 00173, 01334, 01429 Silva 00299 Skantin 00713 SKR 00713 00856, 00099, 00847, 00887, SKY 01014, 01175, 01662, 01693, 01847, 01848, 01850 SKY Italia 00853, 01693, 01847, 01
Akashi Akiba Akira Akito Akura Alaron Alba Albatron Alfide All-Tel Alleron Allorgan Allstar Ambassador America Action American High Amplivision Amstrad Amtron Anam Anam National Andersson Anglo Anhua Anitech Ansonic AOC Aolinpike Apex Digital AR Arc En Ciel Arcam Ardem Aristocrat Aristona ART Arthur Martin ASA Asberg Asora Astra Asuka ATD Atlantic 10009, 10860 10037, 10218, 10455 10418 10037 10171, 10009, 10037, 10163, 10218, 10264, 10668, 10714, 11037, 11498, 11556, 11982 10170 10009, 10036, 10037, 100
E F Easy Living Eaton Ecco ECE Edison-Minerva 11248 10060 10773 10037 10487 10037, 10217, 10218, 10362, Elbe 10610 Elcit 10163 Electroband 10000 Electrograph 11755 10154, 10000, 10463, 10150, Electrohome 10178, 10030, 10073 Elekta 10009, 10264 Elfunk 11037, 11208 ELG 10037 Elin 10009, 10037, 10361, 10548 Elite 10037, 10218 Elta 10009, 10264 Emerald 10178 10047, 10017, 10154, 10451, 10236, 10463, 10180, 10150, 10178, 10171, 11944, 11911, Emerson 11909, 10714, 10668, 10623, 10486, 10036, 10371, 10370, 1036
JVC K Kaige Kaisui Kambrook Kamp Kangli Kangyi Kapsch Karcher Kathrein Kawa Kawasho KB Aristocrat KDS KEC Kendo Kennedy Kennex Kenwood Khind KIC Kiota Kioto Kiton KLH KLL Kloss Kneissel Kolin Kolster Kongque Konichi Konig Konka Kontakt Korpel Korting Kosmos Koyoda Kreisen KTV Kuaile Kulun Kunlun 10054, 10093, 10463, 10053, 10030, 10070, 10036, 10218, 10371, 10418, 10508, 10606, 10650, 10653, 10683, 10731, 11253, 11923 10009, 10264, 10817 10009, 10037, 10217, 10218, 10455 10217 10017, 10180, 10217 1000
Panasonic Panavision Panda Pathe Cinema Pathe Marconi Pausa Paxonic PCE Penney Perdio Perfekt Petters Philco Philharmonic Philips Phocus Phoenix Phonola Pilot Pioneer Pionier Plantron Playsonic Polaroid Poppy Portland Powerpoint Prandoni-Prince Precision Premier President Prima Princeton Prinston Prinz Prism 10054, 10000, 10156, 10250, 10051, 10236, 10030, 11947, 11946, 11941, 11480, 11310, 11291, 11271, 10853, 10650, 10548, 10508, 10367, 10361, 10226, 10208, 10163, 10108, 10037, 10035 10037 10051, 1070
Strong Studio Experience Stylandia Sunkai Sunstar Sunwatt Sunwood Superla Superscan Supersonic SuperTech Supra Supreme Susumu Sutron SV2000 SVA Svasa Swisstec Sydney Sylvania Symphonic Synco T Syntax Sysline T+A Tacico Tai Yi Taishan Tandberg Tandy Targa Tashiko Tatung TCL TCM Teac Tec Tech Line Techica Technica 11149, 11163 10843 10217 10218, 10455, 10487, 10610, 10865 10009, 10037, 10264, 10371 10455 10037 10217 10093, 10864, 11944 10009, 10208, 10455, 10805 10009, 10037, 10218, 10556 10178, 10009,
E F G H J K L M N P R S T U V Elfunk Ferguson Finlux Goodmans Hitachi JDV Jensen KLH Lenco Logik Luker Luxor Matsui Maxim Medion Mirror Naiko Narita Panasonic Philips Powerpoint Prima RCA Roadstar Saivod Samsung Schneider SEG Sova Stevison Sylvania Teac Technica Telefunken Thomson Transonic United Vestel 11037 11037 11556 10587, 11037, 11900 11960 11982 11933 11962 10587 11037 11982 11037 11037 11982 11900 11900 11982 11982 11941 11454, 10556, 11961 10698 11933 11948, 11958 11900 11982 11903 11982 11
S T Sharp Sylvania Symphonic Toshiba 11917 11944 11944 11945 b3 S Sharp 20807 Akai Emerson ESA Magnavox Panasonic RCA Sharp Superscan Sylvania Symphonic Toshiba 30899 30821 30821 30821 31362, 31462 31132 30630 30821 30821 30821 31045 b4 A E M P R S T B VCR A A-Mark ABS Admiral Adventura Aiko Aim Aiwa Akai Akura Alba Alienware Allegro Allorgan Allstar America Action American High Amoisonic Amstrad Anam Anam National Ansonic Aristona ASA Asha Astra Asuka 11 20037, 20240, 20000, 20278, 20046 2
Luxor M LXI M Electronic Magnadyne Magnasonic Magnavox Magnin Magnum Manesth Marantz Mark Marta Mastec Master’s Matsui Matsushita Media Center PC Mediator Medion MEI Memorex Metronic Metz MGA MGN Technology Micormay Micromaxx Microsoft Midland Migros Mind Minolta Mitsubishi N Motorola MTC MTX Multitec Multitech Murphy Myryad NAD Naiko NAP National 20048, 20047, 20104, 20043, 20046, 20106, 20315 20037, 20000, 20042, 20067 20037, 20240, 20000, 20038 20081 20037, 20240, 20000, 20278, 21278 20035, 20037, 2
TNIX Tocom Tokai Topline Toshiba U Tosonic Totevision Touch Toyoda Tradex Triad Trix Uher Ultra Ultravox Unitech United Universum V W X Y Z Vector Vector Research Victor Video Concepts Video Technic Videomagic Videosonic Viewsonic Villain Voodoo Wards Watson Weltblick Wharfedale White Westinghouse World XR-1000 Yamaha Yamishi Yoko Zenith ZT Group ZX 20037 20240 20037, 20104, 20041 20348 20081, 20240, 20045, 20000, 20042, 20067, 20043, 20209, 20041, 20352, 20432, 20742, 20845, 21008, 21145, 21972, 219
F Entivo Enzer ESA EuroLine Fenner Ferguson Finlux Firstline G Fisher Funai Fusion Gateway GE General Electric Germatic Global Link Global Solutions Global Sphere Go Video GoldStar Goodmans GP Audio GPX Gradiente Graetz Gran Prix Grandin Greenhill Grundig Grunkel H H&B Haaz Haier Hanseatic Harman/Kardon HCM HDT HE Henss HiMAX Hitachi Hiteker Hoeher 30503, 30539 30784, 30770, 31228 30821, 31268 30675, 30788, 31115, 31233 30651 30651, 30695, 30713, 30884, 30898, 31695, 31730 30672, 30591, 30741, 30751,
Salora Sampo Samsung Sansui Sanyo Scan ScanMagic ScanSonic Schaub Lorenz Schneider Schwaiger Scientific Labs Scott Seeltech SEG Sensory Science Shanghai Sharp Sharper Image Sherwood Shinco Shinsonic Siemssen Sigmatek Siltex Silva Silva Schneider SilverCrest Simaudio Singer Sistemas Skantic Skymaster Skyworth Sliding Slim Art SM Electronic Smart Sonai Sonashi Sonic Blue Sony Sound Color Soundmaster 15 30741 30752, 31321, 31347 30490, 30573, 30744, 30199, 30820, 30899, 31044, 31075, 31635, 31932 30784, 3069
DVD preset codes / Codes préréglés DVD e Model No. / Modéle numéro 32134 (default / défaut) DVD-555 DVD-755 DVD-900 DVD-910 DVD-955 DVD-1000 DVD-1200 DVD-1500 DVD-1710 DVD-1910 DVD-1930CI DVD-2200 DVD-2800 DVD-2800g DVD-2900 DVD-2910 DVD-2930CI DVD-3800 DVD-3910 DVD-3930CI DVD-5900 DVD-5910 DVD-9000 DVM-715 DVM-1800 DVM-1805 DVM-1815 DVM-2815 DVM-4800 30490 DVD-800 DVD-1600 DVD-2000 DVD-2500 DVD-3000 DVD-3300 [ ]z: Preset codes set upon shipment from the factory.
www.denon.com Denon Brand Company, D&M Holdings Inc. Printed in Japan 00D 511 4654 004 AVPA1HDCIEU_0121.