Owner's Manual

.. Surround Parameters
•
fJ Tone
.. Room EO
II RESTORER
II Dynamic EO
III Audio Delay
II Night Mode
~
{Tffil
Parameter --- '
Parameters can be called out directly by pressing the PARA button on
the main remote control unit.
Pressth~ PlIRE DIRE~'" ))utWn.«mtb~JDain unjt~r the
PURE bQ~~. ~Il tile. Ql~Il"~O~f:ollt ..ol.unit ..
•
• To cancel. press the PURE DIRECT button on the main unit or the
PURE button on the main remote control unit.
• When
in the PURE DIRECT mode, the GUI screen is not displayed
and the display
on the main unit is turned off.
• If the HDMI input connector is selected, video outputs
are output in
the PURE DIRECT mode.
• The channel level and surround parameters
in the PURE DIRECT
mode
are the same as in the DIRECT mode.
*:When DSD signals are converted to PCM signals as set by the
audio parameters and speaker settings, "DIRECT" or "MULTI
CH
DIRECT" is displayed.
Direct Playback
[Selectable items]
2~::c'r;·:·",T:'.::?":W
;;;n'Bll!"F,w. :
:::::lJm!!~rmZL
In this mode the signals bypass the tone control circuitry for high
quality sound.
The display when the DIRECT mode is selected depends
on the input
signal.
For multi-channel sources, the display depends
on the surround back
output's play mode.
•
ItiI
Analog signal /
PCM
(2chl/
Dolby Digital source / DIRECT
DTS source /
Other 2-ehannel digital signals
DSD
(2ch)
DSD DIRECT (*)
MULTI CH DIRECT
PCM (multi
chI
M DIRECT + PLIIx CINEMA
M DIRECT
+ PLDx MUSIC
M DIRECT
7.1
DSD (multi chI
DSD MULTI DIRECT (*)
•
For details, see page 92.
Mode
Select the mode according to the playback source.
IJ In the PLDx or PLD mode
[Selectable items] I lliii lltitlill
IJ In the DTS NEO:6 mode
[Selectable items] lIiiIJI ~j
•
The "Music" mode is also effective for movie sources including a lot
of stereo music.
50
.. Surround Parameters
•
fJ Tone
.. Room EO
II RESTORER
II Dynamic EO
III Audio Delay
II Night Mode
~
{Tffil
Parameter --- '
Parameters can be called out directly by pressing the PARA button on
the main remote control unit.
Pressth~ PlIRE DIRE~'" ))utW ... «mtb~JDain unjt~r the
PURE bQ~~. ~Il tile. Ql~Il"~O~f:ollt ..ol.QIlit ..
•
• To cancel. press the PURE DIRECT button on the main unit or the
PURE button on the main remote control unit.
• When
in the PURE DIRECT mode, the GUI screen is not displayed
and the display
on the main unit is turned off.
• If the HDMI input connector is selected, video outputs
are output in
the PURE DIRECT mode.
• The channel level and surround parameters
in the PURE DIRECT
mode
are the same as in the DIRECT mode.
*:When DSD signals are converted to PCM signals as set by the
audio parameters and speaker settings, "DIRECT" or "MULTI
CH
DIRECT" is displayed.
Direct Playback
[Selectable items]
i~n •• c~;~:
d •• rmflb
In this mode the signals bypass the tone control circuitry for high
quality sound.
The display when the DIRECT mode is selected depends
on the input
signal.
For multi-channel sources, the display depends
on the surround back
output's play mode.
•
ItiI
Analog signal /
PCM
(2chl/
Dolby Digital source / DIRECT
DTS source /
Other 2-ehannel digital signals
DSD
(2ch)
DSD DIRECT (*)
MULTI CH DIRECT
PCM (multi
chI
M DIRECT + PLIIx CINEMA
M DIRECT
+ PLDx MUSIC
M DIRECT
7.1
DSD (multi chI
DSD MULTI DIRECT (*)
•
For details, see page 92.
Mode
Select the mode according to the playback source.
IJ In the PLDx or PLII mode
[Selectable items] I lliii lltitlill
IJ In the DTS NEO:6 mode
[Selectable items] lIiiIJI ~j
•
The "Music" mode is also effective for movie sources including a lot
of stereo music.
50