Stereo Amplifier User Manual


Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting Specifications
This can be set when “i/p Scaler” is set to anything other than “OFF”.
Aspect
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
[Input source]
DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX
NET/USB
[Selectable items]
Full Normal
This can be set when “i/p Scaler” is set to anything other than “OFF”.
Progressive Mode
Select optimum progressive mode for video material.
[Input source]
DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX
[Selectable items]
Auto Video1 Video2
• This can be set when “i/p Scaler” is set to anything other than
“OFF”.
• When the “i/p Scaler” is set to “A to H & H to H”, the resolutions can
be setup to the analog video input signal and HDMI input signal.
• To enjoy 1080p/24 Hz video images, use a monitor which supports
1080p/24 Hz video signals.
• With film source (24 Hz), you can enjoy a film-like image. It is
recommended that you use 1080p/60 Hz for video source and mixed
source.
• It is not possible to convert a 50 Hz signal to 1080p/24 Hz. It is output
at a resolution of 1080p/50 Hz.
• It is not possible to convert a 1080p/60 Hz signal to 1080p/24 Hz.
Operating from the main unit
Press the SCALE button.
Auto
480p / 576p 1080i
1080p1080p:24 Hz 720p
Resolution
Set resolution for video signal output to HDMI.
[Selectable items]
Auto 480p/576p 1080i 720p 1080p 1080p:24 Hz
h Input Mode
Make input mode and decode mode settings for this source.
The selectable input modes depend on the input source and
“Assign” setting (vpage 48, 49).
Input Mode
Set the input mode for this source.
[Input source]
TUNER PHONO
(
iPod
)
[Selectable items]
Analog
EXT. IN
[Input source]
NET/USB XM HD Radio
[Selectable items]
Auto
EXT. IN
[Input source]
CD DVD HDP TV/CBL SAT VCR DVR-1 DVR-2
V.AUX
[Selectable items]
Auto
HDMI Digital Analog EXT. IN
When a digital signal is properly input, the “ ” indicator lights on
the display. If the “ ” indicator does not light, check the digital input
connector assignment and the connections.
Operating from the main unit or main remote
control unit
Press the INPUT MODE button on the main unit or the INPUT button
on the main remote control unit.
z1: This can be selected for input sources for which the GUI menu
“Assign” setting is set to “HDMI” (vpage 48). Excluding CD
and TUNER.
z2: This can be selected for input sources for which the GUI menu
“Assign” setting is set to “Digital” (vpage 48).
Auto
EXT. IN
HDMI
z1
Digital
z2
Analog
Decode Mode
Set the decode mode for this source.
[Input source]
CD DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX
[Selectable items]
Auto PCM DTS
• This can be selected for input sources for which the GUI menu
“Assign” setting is set to “HDMI” or “Digital”.
• Only set “PCM” and “DTS” when playing the respective signals.
j Rename
Change the display name for this source.
Names containing up to 8 characters can be input.
[Characters that can be input]
A ~ Z a ~ z 0 ~ 9 ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
For input sources for which “HDMI” or “Digital” are set at the GUI
menu “Assign” setting, the analog input level and digital input level
can be set separately.
k Source Level
Corrects the playback level of the selected input source’s audio
input.
[Variable range]
–12dB
~
0dB
~
+12dB
Setup