AV SURROUND RECEIVER AVR-1610 Owner’s Manual Manuel de l’Utilisateur b The illustrations used for explaining operations in this manual show the buttons of the remote control unit. The same operations can be performed using the buttons with the same names on the main unit panel. b Les illustrations des boutons présentes dans ce manuel servent à expliquer le fonctionnement de la télécommande. Vous pouvez contrôler l’appareil à l’aide du bouton portant le même nom sur la façade de l’appareil.
ENGLISH FRANCAIS n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FRANCAIS ENGLISH FCC INFORMATION (For US customers) n NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION 1. PRODUCT This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. 2.
ENGLISH n Contents Getting Started Flow of operations through playback··········································2 Accessories···················································································2 Cautions on Handling····································································3 Cautions on Installation································································3 About the Remote Control Unit···················································3 Inserting the Batteries·················
ENGLISH Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Connections Flow of operations through playback Getting Started Getting Started Perform the operations leading to playback on the AVR-1610 in the order shown below. Accessories Settings Connections Check that the following parts are supplied with the product.
ENGLISH Getting Started Cautions on Handling • Before turning the power switch on Check once again that all connections are correct and that there are no problems with the connection cables. Note: For proper heat dispersal, do not install this unit in a confined space, such as a bookcase or similar enclosure. Connections • Power is supplied to some of the circuitry even when the unit is set to the standby mode.
ENGLISH Getting Started Part Names and Functions Front Panel W8 W7 W6 W5 Button that function in the same way as remote control buttons W4 W3 o i For buttons not explained here, see the page indicated in parentheses ( ).
ENGLISH Getting Started Part Names and Functions Display Q4 Q3 Q2 Q1 Q0 o i u y Connections Settings q w Playback q Decoder indicators The indicator for the currently operating decoder lights. Remote Control w Input audio signal indicators e Information display The input source name, surround mode, setting values and other information are displayed here. r Front speaker indicator Information These light according to the settings of the front A and B speakers (vpage 37).
ENGLISH Rear Panel Connections i Q1 Q0 o Getting Started Part Names and Functions Settings Playback Remote Control Information e r t y u q HDMI connectors······································································ (13) t Analog audio connectors························································· (14) o COMPONENT VIDEO connectors············································ (14) w Digital audio connectors·························································· (14) y FM/AM a
ENGLISH Getting Started Part Names and Functions Remote Control Unit q Connections w e Q5 Settings Q6 r Q7 Playback Q8 Remote Control t y u i Q9 W0 W1 W2 o Information Q0 W3 Q1 Q2 W4 Troubleshooting Q3 Specifications W5 W6 Q4 W8 q Remote control signal transmitter w Power buttons ········································································· (16) e QUICK SELECT buttons ··························································(45) r SOURCE SELECT buttons ·················
ENGLISH n Connection Flow Connections for all compatible audio and video signal formats are described in this owner’s manual. Please select the types of connections suited for the equipment you are connecting. After connections are completed, certain settings must be made on the receiver. Make the settings indicated “ Set as necessary ” for the individual items.
ENGLISH Getting Started Important Information Converting Input video signals for Output (Video Conversion Function) How the on-screen display is displayed depending on the video input signal Connections Settings The AVR-1610 is equipped with four types of video input connectors (HDMI, Component video, S-Video and video) and three types of video output connectors (HDMI, Component video and video). Use the connectors according to the devices to be connected.
ENGLISH n When 7.1ch (Surround Back Speaker) Connected Front speakers 2 z1 z4 z5 Surround speakers Front speaker Surround back speakers • It is not possible to use the front height speakers and surround back speakers simultaneously. • To play surround back speakers or front height speakers, connect a power amplifier to the AVR-1610’s SURR. BACK / FRONT HEIGHT PRE OUT connectors (vpage 11).
ENGLISH Getting Started Installing/Setting the Speakers s Set the “Pre Assign” Mode According to the Speaker Layout. The signals output from the AVR-1610’s SURR. BACK / FRONT HEIGHT PRE OUT connectors can be switched to signals of the surround mode being used (vpage 24 “Pre Assign”). Connections Pre Assign mode (vpage 24) Connecting the Speakers Subwoofer with builtin amplifier Front speakers A The speaker which plays the a sound output from the SURR.
ENGLISH 1 2 3 4 Peel off about 10 mm of sheathing from the tip of the speaker cable, then either twist the core wire tightly or terminate it. Turn the speaker terminal counterclockwise to loosen it. Insert the speaker cable’s core wire to the hilt into the speaker terminal. Turn the speaker terminal clockwise to tighten it. n When using a banana plug Important Information n About HDMI “HDMI” is the abbreviation of “High Definition Multimedia Interface”.
ENGLISH Getting Started Connecting devices Connections The AVR-1610 allows connection of inputs from up to 3 HDMI devices and output to 1 TV. Connections DVD Player )%.* 065 Settings Playback Remote Control Blu-ray Disc Player )%.* 065 SAT/CABLE Tuner )%.* 065 Monitor (TV) )%.
ENGLISH Playback Components SAT/CABLE Tuner Blu-ray Disc player / DVD player Control dock for iPod® Select the terminal to use and connect the device. Use a DENON control dock for iPod (ASD-1R, ASD-11R, ASD-3N or ASD-3W sold separately) to connect the iPod to the AVR-1610. For instructions on the control dock for iPod settings, refer to the control dock for iPod’s operating instructions.
ENGLISH Getting Started Connecting Devices not Equipped with HDMI connectors Recording Components Other Devices Video Camera / Game Console Connections Digital Video Recorder Video Cassette Recorder Select the terminal to use and connect the device. Select the terminal to use and connect the device. For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI connectors” on page 12.
ENGLISH Direction of broadcasting station 1 2 Push the lever. 3 Return the lever. FM antenna 75 Ω/ohms Coaxial cable AM loop antenna (supplied) FM indoor antenna (supplied) • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure the AM loop antenna lead terminals do not touch metal parts of the panel. AM outdoor antenna 1 Press 2 Press .
ENGLISH With the AVR-1610, settings and operations for most functions can be performed by operating while looking at the menus displayed on the monitor screen. ui to 2 Press select the item . The menu is displayed. Settings you want to set, then press ui to 3 Press select the item you want to set, then press . Playback n Setting menus MENU Remote Control 1.Parameter 2.Information 3.Auto Setup 4.Manual Setup 5.Input Setup Information Troubleshooting Set these for example upon purchase.
ENGLISH Getting Started Examples of On-screen Display and Front Display Below we describe typical examples of displays on the TV screen and on the set’s display window. On-screen Display Front Display Description MENU w 1.Parameter q 2.Information 3.Auto Setup 4.Manual Setup 5.Input Setup e q : The menu items are displayed here. w : The selected line is displayed here. q q : The number of the current selected setting menu is Parameter The currently selected item is displayed on the display.
ENGLISH Getting Started Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup) The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. Connections n Audyssey Auto Setup Flow Step 1 :Connect the included Setup Microphone (vpage 20) Settings Playback Step 2 :Audyssey Auto Setup Preparations (vpage 20) n Setting the speakers for playing the front channel Remote Control (Front Sp.
ENGLISH Step 1 : Connect the included Setup Microphone NOTE NOTE around items indicate the settings made upon purchase. When using a subwoofer on which the volume can be adjusted and the crossover frequency can be set Setting the speakers for playing the front channel (Front Sp.) (vpage 11 “Connecting the Speakers”) When using a subwoofer, make the following settings before starting the Audyssey Auto Setup procedure: The front speaker to be measured can be selected ahead of time here.
ENGLISH Getting Started Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup) Changing the PRE OUT connectors assignment (Pre Assign) Connections The signals output from the AVR-1610’s SURR. BACK / FRONT HEIGHT PRE OUT connectors can be switched to signals of the surround mode being used. Settings 1 o p to select 2 Press Pre Assign Mode. Press ui to select “Pre Assign”. Playback 3-1.
ENGLISH 8 Press NOTE . Store Cancel [ENT]:Store ⇩ Step5:Store Storing Please wait... to repeat the measurement. • If the result still differs from the actual connection status after remeasurement or the error message still appears, it is possible that the speakers are not connected properly. Turn the AVR-1610 off, check the speaker connections and repeat the measurement process from the beginning.
ENGLISH Getting Started Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup) Error Messages If the Audyssey Auto Setup procedure could not be completed due to speaker installation, the measuring environment, etc., an error message is displayed. If this happens, check the relevant items, be sure to take the necessary measures, then perform the Audyssey Auto Setup procedure over again.
ENGLISH Making the speaker settings (Speaker Setup) Default settings are underlined. Use this procedure to set the speakers manually or if you wish to change the settings made with the Audyssey Auto Setup procedure. n Items that can be set with the Manual Setup procedure Making other settings (Option Setup) vpage 28 Speaker Config. Speaker Setup HDMI Setup 4-2.HDMI Setup 1.Pre Assign 2.Speaker Config. 3.Bass Setting 4.Distance 5.Channel Level 6.Crossover Freq. 7.
ENGLISH Getting Started Making detailed settings (Manual Setup) Setting items Setting contents Setting items Speaker Config. Connections Surround : Set the presence and size of the Surround speakers. Select speaker configuration • Large : Use of a large speaker that can adequately play back low frequencies. and size. (bass reproduction capability) • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected.
ENGLISH Setting items Channel Level Setting items Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu 26 Specifications Remote control operation buttons NOTE • When set to “Custom”, does not operate. • The front speaker setting stored for the “Quick Select” function is given priority. Troubleshooting This can be set when “Speaker Config.” – “Subwoofer” (vpage 25) is set to “Yes” or “No”.
ENGLISH Getting Started Making detailed settings (Manual Setup) Setting items Making the HDMI settings (HDMI Setup) Default settings are underlined. Connections Make settings for HDMI video/audio output. Setting items Settings Playback Auto Lip Sync Automatic compensation for timing shift in audio and video output. HDMI Audio Out Select HDMI audio output device. Setting contents ON : Compensated. OFF : Not compensated. Setting contents Power Off Control ON：Switched.
ENGLISH Making the audio settings (Audio Setup) Making other settings (Option Setup) Default settings are underlined. Setting items Setting contents ON : Memorize settings. Most recently stored surround mode is automatically selected. OFF : Do not memorize settings. Surround mode does not change according to input signal. NOTE NOTE • The currently selected input source cannot be set. • Input sources set to “Delete” cannot be selected using .
ENGLISH Getting Started Making detailed settings (Manual Setup) Setting items Setting contents Setting items Connections On-Screen Display Tuner Information : This sets the time the on-screen display is displayed Make the settings related to when a tuner operation is performed. displays on the TV screen. • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off.
ENGLISH Getting Started Making the input settings (Input Setup) n Examples of Menu Screen Displays Make the settings related to the currently selected input source. DVD HDP TV SAT/CBL VCR/iPod DVR 1 2 1 Input Mode Decode Mode DVD : Auto : Auto 01 C1 3 2 [ENT]:Select [RTN]:Back Source Level Source Level : DVD Defaulut 02 : [RTN]:Back [ ]:Up/Down [ ]:Rename [RTN]:Back iPod Playback Mode 5-4.Source Level 5-5.
ENGLISH Getting Started Making the input settings (Input Setup) Changing the Input Sources Assigned to the Input Connectors (Assign) Default settings are underlined. Connections Setting items Setting contents Settings Input Assign (HDMI) TV SAT/CBL VCR DVR V.AUX input HDMI : The DVD HDP Assign input sources to input sources are assigned to the HDMI input connectors as shown below. connectors.
ENGLISH Changing the Input Source’s Input Mode and Decoding mode (Input Mode) Default settings are underlined. Setting items Decode Mode Set the input decoding mode. Setting items Auto : Detect type of digital input signal and decode and play source’s automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signals. b Upon purchase, the settings of the different input sources are as shown below.
ENGLISH Getting Started Making the input settings (Input Setup) Setting the Preset Channels to be Skipped (Preset Skip) Correcting the Input Source’s Playback Level (Source Level) Default settings are underlined. Default settings are underlined. Connections Use this procedure to correct the playback level of the currently selected input source's audio input. Set this if there are differences in the input volume levels between the different sources.
ENGLISH n Operation Flow Playing Components (vpage 34) ① Turn on the power of the TV, subwoofer and player. ② Set the TV’s input to the AVR-1610. ③ Load the disc in the player. 2 (vpage 16 “Turning the Power On”) (vpage 31). and select the input channel, press before turning . the component connected to the AVR-1610. 4 Play Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand. 5 Use to adjust the volume. GVariable rangeH ––– –80.0dB ~ 18.
ENGLISH Getting Started Playing Components and hold it down for a 2 seconds or more to 4 Press select the display mode. Connections There are two modes for display the contents recorded on the iPod. Browse mode ：Displayed on the TV screen. n Stopping playback temporarily Settings S S During playback, Video file Sz1 Sz2 the current track) or Playback Remote Control Remote control unit (AVR-1610) S S iPod® A S Information Troubleshooting 5 6 Press or p. to adjust the volume.
ENGLISH Listening to FM/AM Broadcasts Basic Operation Set to “TUNER/AMP”. Press to select “FM” or “AM”. Press to light the “AUTO” indicator on the display, then use station you want to hear. to select the Press to turn off the display’s “AUTO” indicator, then use to select the station you want to hear. . n Default settings Press to select the block (A to G) in which the station is to be preset. Press Press to select the preset number (1 to 8). again to complete the setting.
ENGLISH Getting Started Playing Components Operations During Playback Selecting the Surround Mode Select a surround mode to enjoy surround playback with your favorite sound field effects. Turning Off the Sound Temporarily (Muting) Connections Press q Playing sources according to the sources’ audio signal format/number of channels (Standard Playback) . Operations Settings Playback • The sound is reduced to the level set at menu “Mute Level” (vpage 28). • To cancel, press again.
ENGLISH Displaying the currently playing surround mode n Surround playback of multichannel sources (Dolby Digital, DTS, etc.) Dolby Digital Plus (z1) Dolby TrueHD (z1) DTS-HD (z1) PCM (multi ch) z1：When a signal is input, the HD AUDIO indicator lights. z2：This is displayed when the input signal is “DTS-ES Matrix 6.1” and the AVR-1610’s “AFDM” setting (vpage 40) is set to “ON”. z3：This is displayed when the input signal is “DTS-ES Discrete 6.1”.
ENGLISH Getting Started Selecting the Surround Mode Adjusting the Sound Field Effects (Parameter) r Stereo Playback Connections This is the mode for playing in stereo. The tone can be adjusted. Sound is output from the front left and right speakers and subwoofer. 1 NOTE Select the input source by pressing and play the source (vpage Settings 34). Playback 2 The sound being played in the surround mode can be adjusted to your liking.
ENGLISH Setting items Center Image Setting contents Setting items Setting contents AFDM (Auto Flag Detect ON : Set. OFF : Do not set. Mode) 0.0 ~ 1.0 (0.3) Panorama Surround Back Sets the method of generating of the surround back channel. n For 2-channel sources ON : The surround back channel is used. OFF : No signal is played from the surround back channels.
ENGLISH Getting Started Adjusting the Sound Field Effect (Parameter) Setting items Setting contents Making the MultEQ, Dynamic EQ and Dynamic Volume settings (Audyssey Settings) Front Height Connections ON : Use the front height channel. Set whether or not to use OFF : Do not use the front height channel. the front height channel. This can also be set by pressing . Default settings are underlined.
ENGLISH Setting items Setting contents Setting items Dynamic EQ This can be set when “Dynamic EQ” (vpage 42) is set to “ON”. Day : Low setting provides the least adjustments to the loudest and softest of sounds. Evening : Middle setting prevents loud and soft sounds from being much louder and softer respectively than average sounds. Midnight : High setting affects volume the most, causing all sounds to be of equal loudness.
ENGLISH Getting Started Adjusting the Sound Field Effect (Parameter) Restoring compressed audio to nearly pre-compressed conditions for playback (RESTORER) Default settings are underlined. Connections Settings • Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear.
ENGLISH HDMI Control Function off step n You can switch audio output devices with a TV n You can adjust AVR-1610 volume in the TV volume adjustment operation n You can switch AVR-1610 input source through n When playing the player, the AVR-1610 input function switches to the function of that player NOTE When you turn the TV’s power to standby, check that the power of the AVR-1610 and player also goes on standby. If the HDMI control function does not operate properly, check the following points.
ENGLISH Getting Started Adjust the volume of the different speakers You can adjust the channel level either according to the playback sources or to suit your taste, as described below. Connections Adjust the volume of the different speakers 1 Press . Channel Volume Settings FL C FR SW 0.0dB 0.0dB 0.0dB 0.0dB SR SBR SBL SL 0.0dB 0.0dB 0.0dB 0.0dB Playback Fader FRONT : REAR [ ]:CH Sel. Remote Control Information 2 Press ui to select the speaker. 3 Press o p to adjust the volume.
ENGLISH Registering Preset Codes n Cautions during operation TUNER/AMP : To operate a Tuner : TV : Blu-ray disc player The remote control unit is set to the device mode for the device to be operated. When the remote control transmitter is pointed towards the AVR-1610 at this time, the AVR-1610’s input source switches simultaneously. : Digital video recorder : Video deck Satellite receiver : or cable TV When registration is completed, “RC SETUP OK” appears on the display.
ENGLISH Getting Started Operating Registered Devices TV Blu-ray Disc / DVD Player Connections Operation mode setting CD Player Operation mode setting or Operation mode setting OFF Settings ON/SOURCE TV/POWER 1 3 2 Playback 6 7 CHANNEL + – TV INPUT Remote Control VOLUME df MUTE MENU uio p ENTER SETUP RETURN Default setting (Preset code) Special Remarks Power on / Standby Power on / Standby z1 Play z2 Pause z2 Stop z2 Manual search z2 (fast-reverse / fast-forward) Switch channels (+, –) Swit
ENGLISH Satellite receiver/Cable TV 6 7 Video Deck JVC (001) HITACHI (111) q, w CHANNEL + – uio p ENTER MENU SETUP RETURN Default setting (Preset code) Special Remarks (fast-reverse / fast-forward) Switch channels (+, –) Cursor operation Enter setting Guide menus Setup Return Satellite Cable TV Receiver Direc TV (095) – q or 1 Press for which the for the device punch through function is to be registered and simultaneously for over 2 seconds. “RC SETUP START” appears on the display.
ENGLISH Getting Started Other Information Surround Settings Dolby Digital Dolby Pro Logic gx DTS Digital Surround Dolby Digital is a multichannel digital signal format developed by Dolby Laboratories. A total of 5.1-channels are played: 3 front channels (“FL” , “FR” and “C”), 2 surround channels (“SL” and “SR”) and the “LFE” channel for low frequencies.
ENGLISH Audyssey Dynamic Volume™ DTS 96/24 is a digital audio format enabling high sound quality playback in 5.1-channels with a sampling frequency of 96 kHz and 24 bit quantization on DVD-Video. Audyssey Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies.
ENGLISH Getting Started Surround Surround Modes and Parameters Signals and adjustability in the different modes Parameter (default values are shown in parentheses) Center DIRECT S D D D A D S (OFF) S (0dB) A A MULTI CH DIRECT S D D D A D A S (0dB) S (ON) S STEREO S A A A A D S (OFF) S (0dB) A A MULTI CH IN S D D D A D A S (0dB) S (ON) S DOLBY PRO LOGIC gx S D D D A D S (OFF) A A S S (NOTE1) S (Cinema) DOLBY PRO LOGIC g S D D A A D S (OFF) A
ENGLISH Signals and adjustability in the different modes Parameter (default values are shown in parentheses) Surround mode PRO LOGIC g/gx MUSIC mode only NEO:6 MUSIC mode only MultEQ Dynamic EQ (NOTE5) Dynamic Volume (NOTE6) RESTORER (NOTE7) A Panorama Dimension C.
ENGLISH Getting Started Surround Differences in Surround Mode Names Depending on the Input Signals Input signals Button PCM Connections Surround mode Note Linear ANALOG PCM (multi ch) DTS-HD Linear PCM (2ch) DTS-HD Master Audio DTS DTS-HD High Resolution Audio DTS ES DTS ES DSCRT MTRX (With Flag) (With Flag) DOLBY DTS (5.1ch) DTS 96/24 DOLBY DIGITAL DOLBY DOLBY DIGITAL TrueHD Plus DOLBY DIGITAL EX (With Flag) DOLBY DOLBY DIGITAL EX DIGITAL (With no (5.
ENGLISH Input signals Button PCM Surround mode Note DTS Linear PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS ES DTS ES DSCRT MTRX (With Flag) (With Flag) DOLBY DTS (5.1ch) DTS 96/24 DOLBY DIGITAL DOLBY DOLBY DIGITAL TrueHD Plus DOLBY DIGITAL EX (With Flag) DOLBY DOLBY DIGITAL DIGITAL EX (With (5.
ENGLISH Getting Started Troubleshooting Connections Settings If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
ENGLISH 38, 39 27 GVideoH Symptom No picture appears. 39 37 – 24 Picture cannot be recorded. Cause • The connections between the AVR-1610 and monitor are faulty. • The monitor’s input setting is wrong. • The player is connected using the component input connectors, the monitor is connected using the video (yellow) output connectors. • Input source does not match recorder’s video connection connector (video). 11 45 DVDs cannot be copied on a DVR.
ENGLISH Getting Started GHDMIH Connections Settings Playback Remote Control Symptom HDMI audio signals are not output from speakers. Cause Countermeasure • The “Manual Setup” – “HDMI • Set to “Amp” Setup” – “HDMI Audio Out” setting is set to “TV” No picture appears with HDMI connections. • The connections to the HDMI connectors are faulty. • HDMI input setting is improper. • The monitor is not compatible with copyright protection (HDCP). • The HDMI format of the player and monitor do not match.
ENGLISH Getting Started Specifications n Audio section Connections • Power amplifier Front (A, B): Rated output: (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 75 W+75 W 110 W+110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 75 W+75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 110 W+110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.
List of preset codes / Liste de codes préréglés DEVICE SELECT : TV Television A A.R.
Go Vision Goldstar Goodmans H Gradiente Granada Grandin Grundig Grundy Haaz Haier Haihong Haiyan Hallmark Hankook Hanseatic Hantarex Hantor Harley Davidson Harman/Kardon Harsper Harvard Harwood Hauppauge Havermy HCM Heathkit Helios Hello Kitty Hema Highline Himitsu Hinari Hisense Hitachi Hitachi Fujian Hitachi Pay TV Hitsu Hoeher Hongmei Hongyan Hornyphon Hua Tun Huafa Huanghaimei Huanghe Huanglong Huangshan Huanyu 301 023, 048, 133, 188, 191, 193, 213, 222, 224, 240, 275, 276, 284, 290 185, 235, 272,
P Osaki Osio Osume Otic Otto Versand Pace Pacific Packard Bell Palladium Palsonic Panama Panasonic Panavision Panda Pausa Paxonic PCE Penney Perdio Perfekt Petters Philco Philips Phoenix Phonola Pilot Pioneer Plantron Playsonic Polaroid Poppy Portland Powerpoint Precision Premier Price Club Prima Princeton Prism Profex Profi Profitronic Proline Proscan 284 284 284 356 284, 233, 283 238 284, 209 238, 291 284 284, 216 276, 284 009, 017, 036, 177, 181, 188, 192, 213, 218, 222, 235, 240, 270, 271, 283, 28
Tophouse Toshiba U V W Totevision Toyoda Toyomenka Trans Continens TRANS-continents Transonic Trio Triumph Truetone Tuntex TVS Uher Ultra Ultravox Unic Line United Universal Universum Univox V V2max V7 Videoseven Vector Research Vestel Vexa Victor Video Concepts Videocon Videomac VideoSystem Vidikron Vidtech Viewsonic Viking Vision Vizio Vortec Voxson Waltham Wards Warumaia Watson Waycon Wega Wegavox 239, 246 034, 075, 094, 041, 182, 190, 191, 192, 199, 201, 202, 203, 204, 207, 209, 210, 237, 233, 26
F G H J K L M PRESET CODE NEC O P Nikko Noblex Optimus Optonica Panasonic Pentax Perdio Philco Philips Pilot Pioneer Q R Portland Proscan Pulsar Quartz Radio Shack Radix Randex RCA Realistic S Ricoh Salora Samsung Sanky Sansui Sanyo SBR Scott Sears Sentra Sharp Shogun Sony STS Sylvania T Symphonic Tandy Tashiko Tatung Teac Technics TMK 009, 087, 094 007, 009, 011, 087, 090, 094 038 004, 005, 006, 018, 026, 029, 045, 061, 062, 085 088 087 081, 088 021 024, 049, 064, 066, 067, 068, 069, 107 0
www.denon.com D&M Holdings Inc.
