Simple version v 3 Einfache Variante Version simplifiée Versione semplice Versión sencilla Eenvoudige versie Enkel version Basic version v 12 Basisausführung Version basique Versione base Versión básica Basisversie Grundläggande version AV SURROUND RECEIVER AVR-1611 Advanced version v 28 Anleitung für Fortgeschrittene Version avancée Versione avanzata Versión avanzada Geavanceerde versie Avancerad version Owner’s Manual Bedienungsanleitung Manuel de l’Utilisateur Manuale delle istruzioni Manual d
ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANCAIS DEUTSCH ENGLISH n NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA ANGÅENDE ANVÄNDNINGEN WARNINGS WARNHINWEISE AVERTISSEMENTS AVVERTENZE ADVERTENCIAS WAARSCHUWINGEN VARNINGAR • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord.
ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA • DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Following the provisions of Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC, the EC regulation 1275/2008 and its frame work Directive 2009/125/EC for Energy-related Products (ErP).
ENGLISH Simple version Getting started Thank you for purchasing this DENON product. To ensure proper operation, please read these owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.
ENGLISH Features Fully Discrete, identical quality and power for all 5 channels (110 W x 5ch) The unit is equipped with a power amplifier that plays back highfidelity sound in surround mode with equal quality and power for all channels, true to the original sound. The power amplifier circuit adopts a discrete-circuit configuration that achieves high-quality surround sound play back. Supports HDMI 1.4 with 3D, ARC, Deep Color, x.v.
ENGLISH Simple version Simple version (Simple setup guide) Simple version Here, we explain the entire setup procedure, from unboxing the unit to using it in a home theater. The “Simple version” describes the installation, connection and setup methods for 5.1-channel speakers. See page 29 for the installation, connection and setup methods for speakers other than 5.1-channel speakers. nnBefore connecting the unit, turn off the power to all devices.
ENGLISH 1 Install 1 2 3 4 5 Here, we explain setup using the example of 5.1-channel speaker playback. FL FR SW Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the this unit, and be sure to interconnect the channels and polarities correctly. Peel off about 10 mm of sheathing from the tip of the speaker cable, then either twist the core wire tightly or terminate it.
ENGLISH Blu-ray Disc player and TV TV Basic version Use only an HDMI (High Definition Multimedia Interface) cable that bears the HDMI logo (a certified HDMI product). Using a cable without the HDMI logo (an uncertified HDMI product) may result in abnormal playback. When outputting Deep Color or 1080p, etc., we recommend you use “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet” for enhanced high-quality playback.
ENGLISH 3 Turn on power 1 Turn on the TV and subwoofer power. Power on the TV input to the input of 2 Change this unit. POWER ON to turn on power 3 Press to the unit. The power indicator flashes green and the power turns on. Power on 1 2 3 4 5 4 Set up speakers (Audyssey® Auto Setup) 2 3 4 5 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey Auto Setup”.
ENGLISH Set up speakers (Audyssey® Auto Setup) GExample qH GExample wH FL SW C FL SW C FR ( : Measuring positions) *M FL Front speaker (L) FR Front speaker (R) C Center speaker Mount the setup microphone on a tripod or stand and place it in the main listening position. When placing the setup microphone, adjust the height of the sound receptor to the level of the listener’s ear.
ENGLISH Set up speakers (Audyssey® Auto Setup) Preparation 4 Connect the setup microphone to the SETUP MIC jack of this unit. Step 1 Speaker Detection Step1:Speaker Detection MultEQ Front Sp. :Yes Center Sp. :Yes Subwoofer :Yes Surround Sp. :Yes S.Back(Preout) :No When the setup microphone is connected, the following screen is displayed. Pre Assign: Normal Start Cancel [ENT]:Select [RTN]:Back Here, we explain setup using the example of 5.1-channel speaker playback. For settings other than 5.
ENGLISH Set up speakers (Audyssey® Auto Setup) Calculating Step 4 Step 5 Check Simple version Step 3 Finish Store Unplug the setup microphone from Use ui to select the item you want Use ui to select “Store” and then the screen, use ui 10 On 11 13 14 the unit’s SETUP MIC jack. to check, and then press ENTER . press ENTER . to select “Calculate”, and then press ENTER. 15 Set Dynamic Volume™. Step 2 MultEQ Please check the results of the measured item.
ENGLISH Error messages Parameter Check An error message is displayed if Audyssey® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey Auto Setup over again. This function enables you to check the measurement results and equalizer characteristics after Audyssey Auto Setup. NOTE Be sure to turn off the power before checking speaker connections.
ENGLISH Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand. 3 Adjust the sound volume. 2 3 4 5 When power is switched to standby Press POWER OFF. GPower indicator status in standby modeH • Normal standby : Off • When “HDMI Control” is set to “ON” : Red Basic version 1 the component connected to 2 Play this unit. Press BD to switch an input source for a player used for playback.
ENGLISH Basic version Basic version Here, we explain the connections and basic operation methods for this unit. F Connections vpage 13 F Playback (Basic operation) vpage 19 F Selecting a listening mode (Surround mode) vpage 25 nnRefer to the pages indicated below for information on connecting and playing back the various media and external devices.
ENGLISH Simple version Connections Important information • Make connections as follows before using this unit. Select an appropriate connection type according to the components to be connected. • You may need to make some settings on this unit depending on the connection method. Refer to each description for more information. • Select the cables (sold separately) according to the components being connected.
ENGLISH Important information How the on-screen display appears in accordance with the video input signal The way the on-screen display of the menus, status, etc., is displayed differs according to the type of video signal input to this unit. nnWhen video signals are input from the HDMI or component video connector • Menu: Switches to a screen with a black background and the menu is superimposedz. • Status display: Not displayed.
ENGLISH Connecting an HDMI-compatible device NOTE To enable the ARC function,set “HDMI Control” to “ON” (vpage 50). About Content Type NOTE NOTE The audio signal from the HDMI output connector (sampling frequency, number of channels, etc.) may be limited by the HDMI audio specifications of the connected device regarding permissible inputs. To enable the Content type, set “Video Mode” to “Auto” (vpage 41).
ENGLISH Connecting a TV • Select the connector to use and connect the device. • For video connections, see “Converting input video signals for output (Video conversion function)” (vpage 13). • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 14). To listen to TV audio through this device, use the optical digital connection. NOTE This connection is not required when a TV compatible with the ARC function (Audio Return Channel (HDMI 1.
ENGLISH Cables used for connections Video cable (Yellow) Audio cable (sold separately) (Green) Audio cable (Blue) Coaxial digital cable (White) L L (Red) R R (Red) Digital camcorder Audio cables (sold separately) Audio cable (Yellow) Basic version Component video cable Cables used for connections Video cable (sold separately) Video cables (sold separately) Video cable Connecting a digital camcorder • You can enjoy video and audio from a digital camcorder.
ENGLISH Connecting a control dock for iPod • Connect a control dock for iPod to the unit to enjoy video and music stored on an iPod. • For a control dock for iPod, use ASD-1R, ASD-11R, ASD-3N, ASD3W, ASD-51N and ASD-51W made by DENON (sold separately). • For instructions on the control dock for iPod settings, refer to the control dock for iPod’s operating instructions. Connecting an antenna • Connect the FM antenna or AM loop antenna supplied with the unit to enjoy listening to radio broadcasts.
ENGLISH nnUsing the “Source Select” menu nn Selecting the input source (vpage 19) nn Adjusting the master volume (vpage 19) nn Turning off the sound temporarily (vpage 19) Selecting a listening mode (Surround mode) (vpage 25) Adjusting the master volume q Press SOURCE SELECT. Use VOL df to adjust the volume. Display the “Source Select” menu. Source Select TUNER BD DVD TV SAT/CBL GAME V.AUX DOCK The currently selected input source [ ]:Source is highlighted.
ENGLISH Playing a Blu-ray Disc player/DVD player Playing an iPod® You can play back both video, photo and audio. The following describes the procedure for playing Blu-ray Disc player/ DVD player. Listening to music on an iPod® Press SEARCH and hold it down for 2 seconds or 4 more to select the display mode. 1 DENON Control dock for iPod usable on this unit • ASD-1R/ASD-11R/ASD-3N/ASD-3W/ASD-51N/ASD-51W • There are two modes for displaying the contents recorded on the iPod. Prepare for playback.
ENGLISH Playing an iPod® SEARCH (Press and release) Page search modez1 SEARCH (Press and hold) Browse / Remote mode switching RETURN Return 6 7 (Press and hold) Manual search (fast-reverse/fast-forward) 1 8 9 3 2 RESTORER MEMORY TV POWER TV INPUT Playback / Pause Auto search (cue) Pause Stop RESTORER Store memoryz2 TV power on/standby (Default : SONY) Switch TV input (Default : SONY) • Repeat playback (vpage 42 “Repeat”) • Shuffling playback (vpage 42 “Shuffle”) z1 z T his functions when an ASD
ENGLISH Tuning in radio stations Listening to FM/AM broadcasts TUNER to switch the input 1 Press source to “TUNER”. BAND to select “FM” or 2 Press “AM”. FM When listening to an FM broadcast. AM When listening to an AM broadcast. in the desired broadcast 3 Tune station. q To tune in automatically (Auto tuning) Press MODE to light the “AUTO” indicator on the display, then use TUNING d or TUNING f to select the station you want to hear.
ENGLISH Tuning in radio stations PTY (Program Type) RDS (works only on the FM band) is a broadcasting service which allows a station to send additional information along with the regular radio program signal. PTY identifies the type of RDS program. The program types and their displays are as follows: NOTE nnRDS search Use this function to automatically tune to FM stations that provide the RDS service. RDS-RDS Station CH A1 FM105.50MHz PS Name [CH+-]:Search [SRCH]:PTY 3 Press CH + or CH –.
ENGLISH Tuning in radio stations TP (Traffic Program) RT (Radio Text) TP identifies programs that carry traffic announcements. This allows you to easily find out the latest traffic conditions in your area before leaving home. RT allows RDS stations to send text messages that appear on the display. “RT” appears on the display when radio text data is received. nnTP search Use this function to find RDS stations broadcasting traffic programs (TP stations).
ENGLISH This unit can play input audio signals in multi-channel surround mode or in stereo mode. Select a listening mode suitable for the playback contents (cinema, music, etc.) or according to your liking. Listening Mode Input audio signal Playback Surround Multi channel 2-channel Surround Multi channel Stereo playback (vpage 27) • If multichannel signals are input, they are mixed down to 2-channel audio and are played. • Subwoofer signals are also output.
ENGLISH Standard playback 3 Select the mode corresponding to the playback contents with the menu “Surround Parameter” – “Mode” (vpage 43) to enjoy your favorite sound mode. Cinema This mode is suited for movie sources. Music This mode is suited for music sources. More sound is sent to the front speakers than in “Cinema” mode. Game This mode is suited for games. Pro Logic Height This mode is suitable for playback of 2-channel sources recorded with Dolby Pro Logic.
ENGLISH the source (vpage 20 1 Playing – 24). Press SIMULATION to select the 2 surround mode. • Each time SIMULATION is pressed, the surround mode is switched. This mode is for enjoying stereo sound from all speakers. This is the mode for playing in stereo. The tone can be adjusted. • Sound is output from the front left and right speakers and subwoofer. • If multichannel signals are input, they are mixed down to 2-channel audio and are played. Playing the source (vpage 20 – 1 24).
ENGLISH Advanced version Advanced version Here, we explain functions and operations that let you make better use of this unit. F Speaker installation/connection (Other than 5.
ENGLISH Here we describe the installation, connection and setup methods for speakers other than 5.1-channel speakers. For the installation, connection and setup methods for 5.1-channel speakers, see “Simple version (Simple setup guide)” (vpage 3). When 7.1ch (Front height speaker) installed Procedure for speaker settings Install FHL When 6.1ch (Surround back speaker) installed Simple version Speaker installation/connection (Other than 5.
ENGLISH 7.1-channel/6.1-channel (Surround back speaker) connection Connect • A power amplifier (sold separately) is required for this connection. • For 7.1-channel (Surround back speaker) playback, set “Pre Assign” in “Set up speakers” (vpage 31) to “Normal”. • For the method of connecting 5.1-channel speakers, see page 4. • For the method of connecting the TV, see page 5. 7.1-channel (Front height speaker) connection • A power amplifier (sold separately) is required for this connection. • For 7.
ENGLISH Connect Set up speakers around items indicate the settings. Here we describe how to set up speakers other than 5.1-channel speakers. For the method of setting up 5.1-channel speakers, see “Simple version”, “Set up speakers (Audyssey® Auto Setup)” (vpage 6). First install and connect the speakers to this unit. 1 Set up the remote control unit o p to select the 2 Connect the setup microphone. 4 Use configuration of the connected speakers.
ENGLISH Playback (Advanced operation) Playback (Basic operation) (vpage 19) Selecting a listening mode (Surround mode) (vpage 25) nn HDMI control function (vpage 32) nn Sleep timer function (vpage 33) nn Adjusting the volume of the speakers (vpage 33) nn Quick select function (vpage 34) nn Various memory functions (vpage 34) Convenient functions HDMI control function When you make an HDMI connection with a TV or player compatible with this unit and HDMI control functions, you can perform the following ope
ENGLISH Convenient functions Adjusting the volume of the speakers The power automatically goes into standby once the set time has elapsed. This is convenient for playing sources while going to sleep. You can adjust the channel level either according to the playback sources or to your taste, as described below. Press SLEEP and display the time you want to set. Press AMP to set the remote 1 control unit to amplifier operation The “SLEEP” indicator on the display lights. mode.
ENGLISH Convenient functions Quick select function All of the settings in step 1 can be memorized together. By memorizing frequently used settings, you can quickly access and enjoy a playback environment that is consistently the same. If QUICK SELECT on the main unit is pressed, the same function as with the remote control unit can be obtained. nnSaving the settings 1 Set the items below to the settings you want to save.
ENGLISH Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. 1.Audio Adjust 2.Information 3.Auto Setup 4.Manual Setup 5.Input Setup 1. Audio Adjust 1.Audio Adjust 1.Surround Parameter 2.Tone 3.Audyssey Settings 4.Manual EQ 5.RESTORER 6.Audio Delay [ENT]:Select [RTN]:Back 2. Information 2.Information 1.Status 2.Audio Input Signal 3.HDMI Information 4.Auto Surround Mode 5.Quick Select 6.
ENGLISH Examples of on-screen display and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. On-screen Display Top menu display Front Display Description MENU q Adjust w 1.Audio 2.Information e 3.Auto Setup 4.Manual Setup 5.Input Setup Audio Adjust w e q The menu items are displayed here. w The selected line is displayed here. The currently selected item is displayed on the display. Use ui to move to the item you want to set.
ENGLISH Method for inputting characters Method Using the keyboard screen • Operating with the remote control unit. • Select a character on the TV screen to input characters. Normal screen 5-4.Rename DVD Default e [SFT]:a/A [ENT]:OK : DVD q w [SRCH]:KeyBD [RTN]:Cancel DVD w Press twice. “V” changes to “E”. DED desired character is displayed. • The types of characters that can be input are as shown below. 1-.
ENGLISH Inputting characters Keyboard screen 1 2 Press SEARCH while a normal screen is displayed. a character to be changed. 3 Select q Press uio p to select “[ ]” or “[ ]”. Display the screen for inputting characters. (vpage 35 “Menu map”) nnDisplay of a keyboard input screen q w e r t y q w e r t y u i o 5-4.Rename [DVD A keyboard screen is displayed. ] ABCDEFGHIJKLMNOPQRST UVWXYZ’()*+-.
ENGLISH Input Setup Auto Preset (vpage 39) Preset Skip (vpage 39) 5-1.Auto Preset Auto Tuning Preset Station Memory Storing Preset Memory Start Input Assign (vpage 40) Video (vpage 41) 5-1.Input Assign Default HDMI Digi Comp BD DVD TV SAT/CBL GAME V.AUX 1 2 3 4 O1 C1 Input Mode (vpage 41) 5-2.Video 5-3.Input Mode Video Select: Source Video Mode : Auto Input Mode Decode Mode : Auto : Auto 1 [RTN]:Back Rename (vpage 42) 5-4.Rename Source Level (vpage 42) 5-5.
ENGLISH Input Setup Preset Name Setting items Assign a name to a preset memory. Setting items A1 – G8 Select the preset channel. Setting details • Up to eight characters can be input. • For character input, see page 37. TUNER V.AUX Yes : Reset to the defaults. No : Do not reset to the defaults. Input Assign Examples of input assign menu screen displays 5-1.
ENGLISH Input Setup Component Set this to change the component video input connectors assigned to the input sources. BD DVD V.AUX TV GAME DOCK Default The “Input Assign” settings are returned to the default settings. Setting items Comp1 (Component video) None : Do not assign a component video input connector to the selected input source. Video Select (Continued) Buttons on the remote control unit or main unit can be used for operations. GOperations with the remote control unitH Press V.
ENGLISH Input Setup Setting items Input Mode (Continued) Buttons on the remote control unit can be used for operations. Each time INPUT MODE is pressed, the setting is changed as shown below. Auto Decode Mode Set the decode mode for input source. BD DVD SAT/CBL GAME Playback Mode Setting details TV DOCK V.AUX HDMI Digital This item can be set when the input source is “DOCK”. Setting items Analog Auto : Detect type of digital input signal and decode and play automatically.
ENGLISH Surround Parameter The sound being played in the surround mode can be adjusted to your liking. The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode. For details on the adjustable parameters, see “Surround modes and surround parameters” (vpage 64). Menu operation Adjust surround sound parameters. It may not be possible to set this item depending on the input signal. Setting items Mode Set the play modes for the different surround modes.
ENGLISH Audio Adjust Setting items Panorama Assign front L/R signal also to surround channels for wider sound. Dimension Shift sound image center to front or rear to adjust playback balance. Center Width Assign center channel signal to front left and right channels for wider sound. Delay Time Adjust delay time to control sound stage size. Effect Lev. Adjust effect signal level. Room Size Determine size of acoustic environment. Setting details ON : Set. OFF : Do not set. Setting items S.
ENGLISH Audio Adjust Height Gain Control the front height channel volume. Setting details Low : Reduce the front height channel volume. Mid : Front height channel sound is output with standard sound volume. High : Increase the front height channel volume. “Height Gain” is displayed for the following settings. • When “Pre Assign” (vpage 48) is set to “Front Height”. • When the “Speaker Config.” – “Front Height” setting (vpage 49) is set to other than “None”.
ENGLISH Audio Adjust Setting items Dynamic EQ® Solve the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Reference Level Offset Audyssey Dynamic EQ is referenced to the standard film mix level. It makes adjustments to maintain the reference response and surround envelopment when the volume is turned down from 0 dB. However, film reference level is not always used in music or other non-film content.
ENGLISH Audio Adjust Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker. “Manual EQ” can be set when “MultEQ®” setting (vpage 45) is “Manual”. Setting items Setting details Adjust CH Correct the tone of each speaker. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear.
ENGLISH Speaker Setup Manual Setup Set when changing Audyssey® Auto Setup settings, or when changing the audio, video, display or other settings. • If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to set MultEQ®, Dynamic EQ® and Dynamic Volume™ (vpage 45, 46). • Can be used without changing the settings. Please set if necessary. Menu operation AMP to set the remote control unit to amplifier operation 1 Press mode. 2 Press MENU.
ENGLISH Manual Setup Speaker Config. (Continued) Setting details Surround : Set the presence and size of the surround speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected. Setting items Bass Setting Set subwoofer and LFE signal range playback. Even when the “S.
ENGLISH Manual Setup Setting items Setting details Channel Level Test Tone Start : Output test tone. Set the volume of the test • FL / C / FR / SR / SBRz / SBLz / SL / FHL / FHR / SW : Select the tone to be the same when it speaker. is output from each speaker. zz When the “Speaker Config.” – “S.Back” setting (vpage 49) is set to “1sp”, “S.Back” is displayed. • –12.0dB – +12.0dB (0.0dB) : Adjust the volume.
ENGLISH Manual Setup Default settings are underlined. Make settings for audio playback. Option Setup Default settings are underlined. Make various other settings. Setting details Auto Surround Mode Make setting for memorizing surround mode setting for each input signal type. ON : Memorize settings. Automatically play with the last used surround mode. OFF : Do not memorize settings. Surround mode does not change according to input signal.
ENGLISH Manual Setup Setting items On-Screen Display (Continued) Remote Preset Codes Search a preset code to register in the remote control unit. Quick Select Name Change the “Quick Select” display title to one you prefer. Setting details Master Volume : Display the master volume during adjustment. • Bottom : Display at the bottom. • Top : Display at the top. • OFF : Turn display off. When the master volume display is hard to see when superimposed on movie subtitles, set to “Top”.
ENGLISH Simple version Information Show information about receiver settings, input signals, etc. Items Status Show information about current settings. Setting details Select Source / Name / Surround Mode / Input Mode / Decode Mode / Video Select / Video Mode / Content Type etc. NOTE The information displayed differs according to the input source. Surround Mode : The currently set surround mode. Signal : The input signal type. fs : The input signal’s sampling frequency.
ENGLISH Operating the connected devices by remote control unit Registering the supplied preset codes in the remote control unit enables you to operate devices made by other manufacturers. Operating AV equipment the input source 1 Press button (vpage 19). Input Devices controllable with the remote source Input source control unit select of this unit (Operation mode) buttons select – The operation mode of the remote control unit is switched as shown in the table.
ENGLISH Registering preset codes mode. the input source button on which the preset ui, select the first character of the brand 5 Pressing 8 Press code is to be registered (DVD, BD, SAT/CBL, DOCK, name. Then press ENTER. Brand Search 1 A B C D E The menu is displayed on the TV screen. “Remote Preset Codes” and then press ENTER. 4-4.Option Setup 1.Volume Control 2.Source Delete 3.On-Screen Display 4.Remote Preset Codes 5.Quick Select Name 6.Display 7.
ENGLISH Registering preset codes 12 The screen shown below is displayed, and registration of the preset code is completed. 1 2 Operate the component. Switch the input source (vpage 19). Remote Preset Codes setup is finished. Press [AMP]button. And Press [Enter]button to return MENU. • For details, refer to the component’s operating instructions. [ENT]:OK • The menu screen is retrieved. Press AMP then ENTER. 13 Either of the screens below is displayed. q Selected code is not matched.
ENGLISH Operating components Resetting the remote control unit Simple version nnTV operation Settings for the remote control unit are returned to the default setting.
ENGLISH Information Information Here, we list various information related to this unit. Please refer to this information as needed.
ENGLISH Front panel Display For buttons not explained here, see the page indicated in parentheses ( ). Q8 Q7 Q6 Q5 Q4 Q3 Q4 Q2 W2 W3 W4 w q Decoder indicators W5 W6 W7 These light when the respective decoders are operating. w Input signal indicators e Information display r t y q Power operation button (ON/STANDBY)······································· (6, 11) Turns power to this unit on and off (standby). u io Q0 Q2 V.
ENGLISH Rear panel See the page indicated in parentheses ( ).
ENGLISH q Q7 w e t Q8 u i Q9 Q2 Audyssey buttons··························· (45, 46, 51) W0 W1 Q3 Surround mode buttons····························· (25) • MULTEQ® button • Dynamic EQ® button (DYN EQ) • Dynamic Volume™ button (DYN VOL) o • STANDARD button • Direct / Stereo button (D/ST) • DSP simulation button (SIMULATION) Q1 Q2 W2 Q3 W3 W4 Q4 SHIFT button·········································· (22, 37) Q5 TV operation buttons (TV POWER / INPUT)·································· (57) W
ENGLISH Remote control unit Inserting the batteries q Slide the rear lid in the direction of the arrow and remove it. Operating range of the remote control unit w Load the two batteries properly as indicated by the marks in the battery compartment. Point the remote control unit at the remote sensor when operating it. R6/AA 30° 30° Approx. 7 m e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit.
ENGLISH nn Trademark information (vpage 63) nn Surround (vpage 64) nn Explanation of terms (vpage 68) Simple version Other information Trademark information This product uses the following technologies: Basic version Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Advanced version Manufactured under license under U.S.
ENGLISH Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each surround mode. Symbols in the table S This indicates the audio output channels or surround parameters that can be set.
ENGLISH Surround PRO LOGIC g/gx Music mode only Surround mode (vpage 25) AFDM z12 (vpage 44) S.
ENGLISH Surround nnTypes of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table F This indicates the default surround mode. D This indicates the surround mode that is fixed when “AFDM” (vpage 44) is set to “ON”. S This indicates the selectable surround mode.
ENGLISH Surround DOLBY DIGITAL (5.1/5/4ch) DOLBY DIGITAL (4/3ch) DOLBY DIGITAL (2ch) Simple version Basic version Input signal types and formats PCM NOTE Surround mode (vpage 25) DTS-HD Master Audio DTS-HD High Resolution Audio S S DOLBY DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.
ENGLISH Explanation of terms A Adobe RGB color / Adobe YCC601 color Like x.v.Color, each of these color spaces defines a palette of available colors that is larger than the traditional RGB color model, and closer to the full range of colors perceptible to the human eye. Audyssey Dynamic EQ® Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics.
ENGLISH Explanation of terms W WMA (Windows Media Audio) This is audio compression technology developed by Microsoft Corporation. WMA data can be encoded using Windows Media® Player Ver.7, 7.1, Windows Media®Player for Windows® XP and Windows Media® Player 9 Series. To encode WMA files, only use applications authorized by Microsoft Corporation. If you use an unauthorized application, the file may not work properly.
ENGLISH Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase. GAudioH Cause/Solution Page Audio is not output.
ENGLISH GRemote control unitH GHDMIH 14 50 • Check the connection of the HDMI connectors. • Set the input source to match the connected HDMI connector. • Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not compatible with HDCP, video will not be output correctly. 14 14, 19 14 When the following • Set “HDMI Control” on the menu to “OFF”. To operate power operations are only for each device, set “Power Off Control” to “OFF”.
ENGLISH Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. ON/STANDBY SURROUND MODE 1 SURROUND MODE 0 1 Turn off the power using ON/STANDBY. ON/STANDBY while simultaneously pressing SURROUND MODE 0 and 2 Press SURROUND MODE 1. the display starts flashing at intervals of about 1 second, release the two 3 Once buttons.
ENGLISH Index vvA vvC vvI Information·························································· 53 Audio Input Signal············································· 53 Auto Surround Mode········································ 53 HDMI Information············································· 53 Preset Channel················································· 53 Quick Select······················································ 53 Status································································ 53 Inpu
ENGLISH RESTORER·························································· 47 Room Size··························································· 44 RT········································································ 24 vvS Sampling frequency············································ 69 S.
www.denon.com D&M Holdings Inc. Printed in China 5411 10412 100D 8.AVR1611E2_001_BackPage.
