Operation Manual

24 Printing from a Memory Card
Cropping and enlarging a photo
1. Follow the instructions on the preceding pages
to select the photos you want to print
(& “Printing Photos” on page 21).
2. Press the G [Display/Crop] button.
Depending on your selection, you see a screen
like this:
3. Use the buttons displayed at the bottom of the
LCD screen to make your settings (& “Cropping
and enlarging a photo” on page 16).
Note:
To readjust your setting, press the y [Back] button to return to the
previous screen.
4. When you have finished framing the photo,
press OK.
5. Use the Copies + or - button to set the number of
copies (1 to 99).
6. Press the x [Print Settings] button and change
the settings (& “Selecting special print settings”
on page 22). Then press OK to apply the new
settings.
7. Press the x Start button. Your photo is printed.
If you need to cancel printing, press the
y Stop/Clear button.
Printing with fun frames
You can add colorful frames to your favorite
photographs with PRINT Image Framer.
1. Choose from a variety of frames on the software
CD-ROM that came with the product and save
them to a memory card using EPSON PRINT
Image Framer Tool. For details, see the software
help.
Tip:
You can also use the PIF DESIGNER software to edit the
existing frames or create your own frames. For details, see
the software help.
2. Load the appropriate paper for the frame size
(& page 8).
3. Insert the memory card containing your photos
and P.I.F. frames (& page 19).
4. You see information on the LCD screen telling
you how many P.I.F. images are on the memory
card.
If you want to print your photos by using the
P.I.F. frames already assigned, see “Print photos
without using the Memory Card mode menu”
on page 25.
If you want to select the P.I.F. frames on the
memory card, see “Print photos using the
Memory Card mode menu” on page 25.