Operation Manual

Printing from a Memory Card 25
English
Print photos without using the Memory
Card mode menu
1. Press OK.
2. Use the l or r button to select the photo and
P.I.F. data you want to print. Then press OK.
Note:
❏ Press OK again to check how the photo looks in the
frame.
❏ P.I.F. frames have already been assigned to each photo,
so you cannot change the frame.
3. Press the Copies + or - button to set the number
of copies (1 to 99).
4. Press the x [Print Settings] button and change
the settings (& “Selecting special print settings”
on page 22). Then press OK to apply the new
settings.
5. Press the x Start button. Your photo is printed.
If you need to cancel printing, press the
y Stop/Clear button.
Print photos using the Memory Card
mode menu
1. Press the y [Back] button.
2. Use the l or r button to select View and Print,
Print by Date, or Print All Photos. Then press
OK.
3. Use the l or r button to select the photo you
want to print, then press the x [Print Settings]
button.
4. Use the u or d button to select Layout, then
press the r button.
5. Use the u or d button to select the P.I.F. frame
you want to print with, then press OK.
6. Press OK again and use the Copies + or - button
to set the number of copies (1 to 99).
7. Press the x Start button. Your photo is printed.
If you need to cancel printing, press the
y Stop/Clear button.
Printing on a photo stickers sheet
1. Load a photo stickers sheet (& page 8).
2. Insert a memory card (& page 19).
3. Press the s [Memory Card] mode button.
4. Follow the instructions on the preceding pages
to select photos you want to print (& “Printing
Photos” on page 21).
5. Press the x [Print Settings] button and change
the settings (& “Selecting special print settings”
on page 22). Then press OK to apply the new
settings.
6. Press the x Start button. Your photo is printed.
If you need to cancel printing, press the
y Stop/Clear button.
7. If your printed image is not centered on the
photo stickers sheet, you can adjust its printing
position. Press the F [Setup] button.
8. Use the l or r to select Print Position, then press
OK.
9. Use the u or d button to select Sticker.
10. Press the r button and then use the u, d, l, or r
buttons to select how far (in millimeters) to move
the print position.
11. Press OK to apply the new setting. Then try
printing again.
Note:
This product retains your settings even after it has been
turned off, so you do not need to readjust the printing position
each time you print on a photo stickers sheet.
Setting Description
Paper Type Select PhotoStickers.
Paper Size Make sure A6 is selected.
Layout Select Stickers 16.
Print
Position
Options
Description
Up-Down Move the photo stickers sheet print
position up or down. You can adjust it
by 0.1 mm from --2.5 to +2.5 mm.
Left-Right Move the photo stickers sheet print
position left or right. You can adjust it
by 0.1 mm from -2.5 to +2.5 mm.
Icon panel Text panel