Operation Manual

Printing from a Memory Card 31
English
7. You see the information on the LCD screen. Press
OK to proceed.
8. A confirmation message is displayed on the LCD
screen. Press OK to start backup.
All the photos on your memory card are copied
to your connected storage device. Depending on
how many photos there are, this may take
several minutes.
9. When you are done copying photos, press the
y [Back] button and remove the memory card
(& “Removing a memory card” on page 20).
Note:
When backing up photos to a CD-R/RW, the product creates
a folder for each backup session. You can store multiple
backup sessions on a CD-R/RW.
Printing photos from a storage
drive
1. Follow the instructions on the preceding pages
to connect your drive to the product
(& “Copying photos to a USB drive” on page 30).
Note:
Remove any memory cards from the product. The product
does not recognize peripheral devices when a memory card
is inserted.
2. When you see this screen, use the u or d button
to select which folder to print from, then press
OK.
3. Press the s [Memory Card] mode button, then
follow the same steps as you would to print from
your camera’s memory card (& “Printing
Photos” on page 21).