Operation Manual

32 Printing from a Digital Camera/Mobile Phone/PDA
Printing from a Digital Camera/Mobile
Phone/PDA
You can print your photos from your digital camera
or mobile phone directly.
From a Digital Camera
PictBridge and USB DIRECT-PRINT let you print
your photos by connecting your digital camera
directly to this product.
Make sure your camera and photos meet the
following requirements.
1. Make sure the product is not printing from a
computer.
2. Remove any memory cards from the product.
3. Load the type of paper you want to use
(& page 8). Load enough sheets for the number
of photos you want to print.
4. Press the F [Setup] button.
5. Use the l or r button to select PictBridge Setup,
then press OK.
6. Use the LCD screen to select the print settings
(& “Selecting special print settings” on page 22).
7. When you finish selecting your print settings,
press OK.
8. Connect the USB cable that came with your
camera to the external interface USB port of this
product.
9. Make sure your camera is turned on and use it to
select the photos you want to print, adjust any
necessary settings, and print your photos. See
your camera’s manual for details.
Note:
❏ If your camera is not compatible with PictBridge or USB
DIRECT-PRINT, you will see a message saying that the
connected device cannot be used. Epson cannot
guarantee the compatibility of any cameras.
❏ Depending on the setting on this product and the digital
camera, some combinations of paper type, size, and
layout may not be supported.
❏ Some of the settings on your digital camera may not be
reflected in the output.
Direct printing
compatibility
PictBridge or USB DIRECT-PRINT
File format JPEG
Image size 80 × 80 pixels to 9200 × 9200 pixels
external
interface
USB port