Operation Manual

8 Handling Paper

Loading Paper

1. Open and extend the paper support.

2. Open the front cover.

3. Slide out the front tray.

Note:

Make sure the front tray is in the paper position (lower

position). If it is not, move the tray lever up and reposition the

front tray.

4. Set the paper as shown in the following

illustrations.

Note:

Make sure you do not load more than the recommended

number of sheets. Check the Paper Type setting before

printing to make sure it matches the type of paper you have

loaded (& “Selecting Paper” on page 7).

front cover

front tray

place behind

the tabs

The printable

side is often

whiter or

brighter than the

other side.

make sure it fits

under the arrow

inside the left

edge guide

10 × 15 cm

(4 × 6 in.) and

13 × 18 cm

(5 × 7 in.)