Operation Manual

Handling a CD/DVD 9
English
Handling a CD/DVD
You can print directly on any ink jet printable
CD/DVD using the CD/DVD tray.
c Caution:
You cannot print on thermal-printable CD/DVDs.
Tip:
To print on 8-cm mini CDs, use the EPSON Print CD included in
the software CD-ROM. See the instructions in your on-screen
User's Guide.
Loading a CD/DVD
Note:
❏ Make sure the data, music, or video is burned on your ink jet
printable CD/DVDs before you print. Otherwise, dirt or
scratches on the surface may cause errors when you burn the
data.
❏ If you plan to print large numbers of CD/DVDs, it is a good idea
to print a small sample, then wait a day and check the quality to
make sure it is satisfactory.
1. Turn on the product and open the front cover.
2. Move the tray lever down until the front tray is
lifted to the CD/DVD position (upper position).
c Caution
❏ Do not touch the front tray when operating the tray lever.
❏ Do not move the tray lever while the product is operating.
Note:
Before you move the tray lever, make sure the front tray is not
extended and no paper or other objects are on the front tray.
3. Place your CD/DVD on the CD/DVD tray with
the label surface up. (Make sure the surface is
clean.)
Note:
Use the CD/DVD tray that comes with the product. The tray
cannot be used with other products.
4. Insert the tray into the product until the arrow
mark on the CD/DVD tray is aligned with the
arrow mark on the front tray.
Make sure that either edge of the CD/DVD tray
is inserted into the brackets on the front tray.
c Caution
Do not insert the CD/DVD tray while the product is operating.
Otherwise, your product may be damaged or the surface of
the CD/DVD may become dirty or scratched.
Insert the CD/DVD
tray along the edge
guide