Owner`s manual

78
Playback in ZONE2 (Separate room)
•You can operate this unit so as to enjoy audio in a room (ZONE2)
other than the MAIN ZONE (room where the unit is located).
•You can simultaneously play back the same source in both the MAIN
ZONE and ZONE2. You can also play back separate sources in the
MAIN ZONE and ZONE2.
Audio output
Zone playback by audio output (LINE OUT)
You can playback 2-channel audio in ZONE2 by connecting an external
preamplifier to the ZONE2 OUT terminal of this unit.
n Audio connections
The audio signals of this unit’s ZONE2 audio output terminals are
output to the ZONE2 amplifiers and played on this amplifiers.
AUX IN
R
L
MAIN ZONEZONE2
This unit
Pre-main
amplifier
We recommend using high quality pin-plug cables for audio
connections in order to prevent noise.
NOTE
It is not possible to play the digital audio signals input from the HDMI,
COAXIAL or OPTICAL connectors in ZONE2. Use analog connections
for ZONE2 playback.
Playback
1
Press ZONE2 X to turn on the
ZONE2 power.
The indicator on the display lights.
•Also press input source select button when
in standby mode, the power turns on.
•Press ZONE2 X again to turn off the ZONE2
power.
•Power in ZONE2 can be turned on or off by
pressing ZONE2 ON/OFF on the main unit.
2
Press SOURCE SELECT 0 1
to select the input source to be
played.
The audio signal of the selected source
is output to ZONE2.
•To perform an operation with the main unit,
press
ZONE2 SOURCE many times.
Each time you press ZONE2 SOURCE, the
input source changes.
When power for both MAIN ZONE and ZONE2 is set to ON, power of
the MAIN ZONE only can be turned off. Press POWER X.
Basic version
Advanced version
Information
Advanced version
DVD