Protocol Specs

- 17 -
Z2、Z2CV COMMAND : "*" parameter uses two ASCII characters. (see page6 J) section)
NOTE: Z2 COMMAND
is
isis
is valid
validvalid
valid at AVR-1913 NA model only
COMMAND
PARAMETER
function example
Z2 TUNER ZONE2 mode set , and select source Z2TUNER<CR>
| ---The name of PARAMETER is |
USB/IPOD the same as that of the time of SI COMMAND. Z2USB/IPOD<CR>
USB Select ZONE2 source iPod/USB and USB Start Playback Z2USB<CR>
IPD Select ZONE2 source iPod/USB and iPod Direct Start Playback Z2IPD<CR>
IRP Select ZONE2 source NETWORK and Internet Radio Start Playback Z2IRP<CR>
FVP Select ZONE2 source NETWORK and Favorites Start Playback Z2FVP<CR>
SOURCE ZONE2 mode cancel Z2SOURCE<CR>
ON ZONE2 ON/OFF change Z2ON<CR>
OFF Z2OFF<CR>
? Return Z2 Status Z2?<CR>
Z2MU ON ZONE2 OUTPUT MUTE ON/OFF change Z2MUON<CR>
OFF Z2MUOFF<CR>
? Return Z2MU Status Z2MU?<CR>
Z2SLP OFF ZONE2 SLEEP TIMER setting Z2SLPOFF<CR>
*** ***:001 to 120 by ASCII , 010=10min Z2SLP120<CR>
? Return SLP Status Z2SLP?<CR>