Protocol Specs

COMMAND PARAMETER
function example
CV SB UP ---SURROUND BACKch (SBch 1SP) CVSB UP<CR>
SB DOWN CVSB DOWN<CR>
SB ** **:38 to 62 by ASCII , 50=0dB CVSB 50<CR>
MU ON OUTPUT MUTE ON/OFF change MUON<CR>
OFF MUOFF<CR>
SI PHONO Select INPUT source SIPHONO<CR>
CD SICD<CR>
TUNER SITUNER<CR>
DVD ---Select DVD/VDP function at AVR-2106 SIDVD<CR>
VDP ---Invalid at AVR-2106 SIVDP<CR>
TV ---Select TV/DBS function at AVR-2106 SITV<CR>
DBS/SAT ---Invalid at AVR-2106 SIDBS/SAT<CR>
VCR-1 SIVCR-1<CR>
VCR-2 SIVCR-2<CR>
VCR-3 ---Invalid at AVR-2106 SIVCR-3<CR>
V.AUX SIV.AUX<CR>
CDR/TAPE1 ---Select CDR/TAPE function at AVR-2106 SICDR/TAPE1<CR>
MD/TAPE2 ---Invalid at AVR-2106 SIMD/TAPE2<CR>
ZM ON MAIN-ZONE ON/OFF change at AVR-2106 ZMON<CR>
OFF ZMOFF<CR>
Z1 PHONO ---Invalid at AVR-2106 Z1PHONO<CR>
| |
CDR/TAPE1 Z1MD/TAPE2<CR>
SOURCE ---Invalid at AVR-2106 Z1SOURCE<CR>
UP ---Invalid at AVR-2106 Z1UP<CR>
DOWN Z1DOWN<CR>
** Z180<CR>
ON ---Invalid at AVR-2106 Z1ON<CR>
OFF Z1OFF<CR>
The PARAMETER of CV COMMAND : "*" parameter uses two or three ASCII characters. (see page4 (J) section)
- -
243