Protocol Specs

- 18 -
Z2

Z2CV COMMAND : "*" parameter uses two ASCII characters. (see page6 J) section)
NOTE: Z2 COMMAND
 

 
when “ZONE2” is selected with “Amp Assign” at AVR-1913.
Z2**(volume), Z2CV COMMAND
 
 
 
when “ZONE2” is selected with “Amp Assign” at AVR-2113.
COMMAND
PARAMETER
function example
Z2 CD ZONE2 mode set , and select source Z2CD<CR>
| ---The name of PARAMETER is |
USB/IPOD the same as that of the time of SI COMMAND. Z2USB/IPOD<CR>
USB Select ZONE2 source iPod/USB and USB Start Playback Z2USB<CR>
IPD Select ZONE2 source iPod/USB and iPod Direct Start Playback Z2IPD<CR>
IRP Select ZONE2 source NETWORK and Internet Radio Start Playback Z2IRP<CR>
FVP Select ZONE2 source NETWORK and Favorites Start Playback Z2FVP<CR>
SOURCE ZONE2 mode cancel Z2SOURCE<CR>
UP ZONE2 VOLUME UP/DOWN , direct change to **dB Z2UP<CR>
DOWN Z2DOWN<CR>
**
**:
00 to 98
by ASCII , 80=80(0dB),
00=
-
0(
--
dB)
(MIN)
Z280<CR>
ON ZONE2 ON/OFF change Z2ON<CR>
OFF Z2OFF<CR>
? Return Z2 Status Z2?<CR>
Z2MU ON ZONE2 OUTPUT MUTE ON/OFF change Z2MUON<CR>
OFF Z2MUOFF<CR>
? Return Z2MU Status Z2MU?<CR>
Z2CV FL UP ZONE2 CHANNEL VOLUME UP/DOWN , direct change to **dB Z2CVFL UP<CR>
FL DOWN ---FRONT Lch Z2CVFL DOWN<CR>
FL ** **:38 to 62 by ASCII , 50=0dB Z2CVFL 50<CR>
FR UP ZONE2 CHANNEL VOLUME UP/DOWN , direct change to **dB Z2CVFR UP<CR>
FR DOWN ---FRONT Rch Z2CVFR DOWN<CR>
FR ** **:38 to 62 by ASCII , 50=0dB Z2CVFR 50<CR>
? Return Z2CV Status Z2CV?<CR>
Z2SLP OFF ZONE2 SLEEP TIMER setting Z2SLPOFF<CR>
*** ***:001 to 120 by ASCII , 010=10min Z2SLP120<CR>
? Return SLP Status Z2SLP?<CR>