Operation Manual


ENGLISH
Getting Started
Connections Remote Control Information Troubleshooting
SpecificationsMulti-ZoneSettings
1
Tune in the broadcast station you want to preset.
2
Press .
3
Press to select the block (A to G)
in which the station is to be preset.
4
Press to select the preset number (1 to 8).
5
Press again to complete the setting.
• To preset other stations, repeat steps 1 to 5.
• Stations can be preset automatically at menu “Auto Preset” (vpage
38).
NOTE
Preset stations are erased by overwriting them.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold to change
frequencies continuously.
• The time (default : 30 sec) for which the GUI menu are displayed can
be set at “GUI-Tuner” (vpage 32).
Presetting Radio Stations (Preset Memory)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
Playing Components
1
Press to select the memory block (A to G).
2
Press to select the desired preset channel (1
to 8).
n Default settings
Auto tuner presets
A1 ~ A8
87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 /
90.1 MHz
B1 ~ B8
522 / 603 / 999 / 1404 / 1611 kHz,
90.1 / 90.1 / 90.1 MHz
C1 ~ C8
90.1 MHz
D1 ~ D8
90.1 MHz
E1 ~ E8
90.1 MHz
F1 ~ F8
90.1 MHz
G1 ~ G8
90.1 MHz
Listening to Preset Stations
Front
1
Set to “MAIN/TV” and
to “MAIN”.
2
Press to select “TUNER”.
3
Press to select “FM” or “AM”.
4
Tune in the desired broadcast
station.
q To tune in automatically (Auto Tuning)
Press to light the “AUTO” indicator on the display, then use
to select the station you want to hear.
w To tune in manually (Manual Tuning)
Press to turn off the display’s “AUTO” indicator, then use
to select the station you want to hear.
Listening to FM/AM Broadcasts
Basic Operation
Front
Front
Rear
Playback