Protocol Specs

- 19 -
Z2

Z2CV COMMAND : "*" parameter uses two ASCII characters. (see page6 J) section)
COMMAND
PARAMETER
function example
Z2 PHONO ZONE2 mode set , and select source Z2PHONO<CR>
| ---The name of PARAMETER is |
USB/IPOD the same as that of the time of SI COMMAND. Z2USB/IPOD<CR>
USB Select ZONE2 source iPod/USB and USB Start Playback Z2USB<CR>
IPD Select ZONE2 source iPod/USB and iPod Direct Start Playback Z2IPD<CR>
IRP
Select ZONE2 source NETWORK and Internet Radio Start Playback
Z2
IRP
<CR>
FVP
Select ZONE2 source NETWORK and Favorites Start Playback
Z2
FVP
<CR>
SOURCE ZONE2 mode cancel Z2SOURCE<CR>
UP ZONE2 VOLUME UP/DOWN , direct change to **dB Z2UP<CR>
DOWN Z2DOWN<CR>
**
**:
00 to 98
by ASCII , 80=80(0dB),
00=
-
0(
--
dB)(MIN)
Z280<CR>
ON ZONE2 ON/OFF change Z2ON<CR>
OFF Z2OFF<CR>
? Return Z2 Status Z2?<CR>
Z2MU ON ZONE2 OUTPUT MUTE ON/OFF change Z2MUON<CR>
OFF Z2MUOFF<CR>
? Return Z2MU Status Z2MU?<CR>
Z2CS ST ZONE2 Channel setting Z2CSST<CR>
MONO Z2CSMONO<CR>
? Return Z2CS Status Z2CS?<CR>
Z2CV FL UP ZONE2 CHANNEL VOLUME UP/DOWN , direct change to **dB Z2CVFL UP<CR>
FL DOWN ---FRONT Lch Z2CVFL DOWN<CR>
FL ** **:38 to 62 by ASCII , 50=0dB Z2CVFL 50<CR>
FR UP ZONE2 CHANNEL VOLUME UP/DOWN , direct change to **dB Z2CVFR UP<CR>
FR DOWN ---FRONT Rch Z2CVFR DOWN<CR>
FR ** **:38 to 62 by ASCII , 50=0dB Z2CVFR 50<CR>
? Return Z2CV Status Z2CV?<CR>
Z2HPF ON ZONE2 HPF ON/OFF Z2HPFON<CR>
OFF Z2HPFOFF<CR>
? Return Z2HPF Status Z2HPF?<CR>