Operation Manual


Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
NOTE
• It is not possible to convert “1080i” signals into “720p” format.
• It is not possible to convert “720p” signals into “1080i” format.
This can be set when “i/p Scaler” is set to “A to H”.
s
HDMI Video Setup
Make settings for HDMI video output.
i/p Scaler
Make settings for i/p scaler function.
[Selectable items]
A to H
: Use i/p scaler function for analog video signal.
OFF
: Do not use i/p scaler function.
Resolution
Make settings for resolution of HDMI video output signal.
[Selectable items]
Auto
: Detect monitor panel resolution and automatically set
output resolution.
480p/576p
: Output at 480p/576p resolution.
1080i
: Output at 1080i resolution.
720p
: Output at 720p resolution.
1080p
: Output at 1080p resolution.
Progressive Mode
Select optimum progressive mode for video material.
[Selectable items]
Auto
: Automatically detect video material type.
Video1
: Select mode suitable for video playback.
Video2
: Select mode suitable for video and 30-frame film material
playback.
This can be set when “i/p Scaler” is set to “A to H”.
Color Space
Make settings for output color space.
[Selectable items]
YCbCr
: Output using YCbCr format.
RGB
: Output using RGB format.
When connected to a monitor with a DVI-D connector (HDCP
compatible) using an HDMI/DVI converter cable, the signals are output
in RGB format, regardless of this setting.
RGB Range
Make settings for RGB output range.
[Selectable items]
Normal
: Use video range from 16 (black) to 235 (white).
Enhanced
: Video range from 0 (black) to 255 (white). Use this setting
to avoid black washout.
Audio Setup
Make settings for audio playback.
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone Setup
5.Option Setup
3.Audio Setup
2.2ch Direct/Stereo
3.Dolby Digital Setup
4.Auto Surround Mode
5.Manual EQ
1.EXT.IN SW Level
2-3.Audio Setup
a
EXT. IN Subwoofer Level
Set the subwoofer level for playback.
[Selectable items]
0dB +5dB +10dB
:
Select according to the player in use.
+15dB
:
This is the recommended level.
s
2ch Direct/Stereo
Make speaker settings for 2-channel mode playback.
Setting
To change the settings, select “Custom”.
[Selectable items]
Basic
: Use the same settings as in “Speaker Setup”.
Custom
: Make separate settings for 2-channel mode.
Aspect
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
[Selectable items]
FULL
: Output at 16:9 aspect ratio.
NORMAL
: Output at 4:3 aspect ratio.
This can be set when “i/p Scaler” is set to “A to H”.
Setup
When “YCbCr” is selected under “Color Space”, “RGB Range” will
have no effect.
1.AVR2808E2_ENG.indd 32 2007/09/28 11:41:24