Operation Manual
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
• With HDMI, the video and audio signals are transferred simultaneously.
To play the video signal assigned at “HDMI” combined with the
audio signal assigned at “Digital”, select “Digital” at menu “Input
Setup” – “Input Mode” (vpage 34).
• When the AVR-2808 and monitor are connected with an HDMI cable,
if the monitor is not compatible with HDMI audio signal playback,
only the video signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the monitor.
Assign
Assign input sources to input connectors.
HDMI
Select HDMI connector to assign to this source.
[Input source]
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
[Selectable items]
HDMI1
: Assign HDMI1 input connector.
HDMI2
: Assign HDMI2 input connector.
None
: No HDMI input connector assigned.
Input
source
DVD HDP TV/CBL SAT VCR DVR V.AUX
Default
setting
HDMI1 HDMI2 None None None None None
Digital In
Select digital input connector to assign to this source.
[Input source]
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
[Selectable items]
COAX1
: Assign COAXIAL 1 input connector.
COAX2
: Assign COAXIAL 2 input connector.
COAX3
: Assign COAXIAL 3 input connector.
OPT1
: Assign OPTICAL 1 input connector.
OPT2
: Assign OPTICAL 2 input connector.
OPT3
: Assign OPTICAL 3 input connector.
OPT4
: Assign OPTICAL 4 input connector.
None
: No digital input connector assigned.
Input
source
CD DVD HDP TV/CBL SAT VCR DVR V.AUX
Default
setting
COAX
3
COAX
1
None
COAX
2
OPT
1
OPT
3
OPT
2
OPT
4
Input
source
DVD HDP TV/CBL SAT VCR DVR V.AUX
Default
setting
1-RCA 2-RCA 3-RCA None None None None
Component In
Select component video input to assign to this source.
[Input source]
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
[Selectable items]
1-RCA
: Assign component video 1 input connector.
2-RCA
: Assign component video 2 input connector.
3-RCA
: Assign component video 3 input connector.
None
: No component video input connector assigned.
iPod dock
Assign Control Dock for iPod to this source.
[Input source]
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
[Selectable items]
Assign
: Assign iPod input.
None
: Do not assign iPod input.
With the default settings, the Control Dock for iPod can be used
connected to the VCR (iPod) connector.
iPod
Make settings for “iPod” playback.
Repeat
Make settings for repeat mode.
[Selectable items]
All
: Repeat all songs.
One
: Repeat the current song.
OFF
: Cancel repeat mode.
[Input source]
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
Setup
1.AVR2808E2_ENG.indd 39 2007/09/28 11:41:29