Operation Manual
Getting Started Connections Setup Remote Control Multi-Zone Information Troubleshooting
ENGLISH
1
Either turn <SOURCE SELECT> or press [TUNER]
(AMP mode) to select “TUNER”.
2
To operate using the main remote control unit, set the
remote control unit to the TUNER ( ) mode.
(vpage 51 “Remote Control Unit Operations”)
3
Press [SEARCH] to select “PTY”.
4
Watching the display, press ui to call out the desired
program type.
5
Press [CHANNEL].
PTY search begins automatically.
b If there is no station broadcasting the designated program type
with the above operation, all the reception bands are searched.
b The station name is displayed on the display after searching
stops.
6
To continue searching, repeat steps 2 to 4.
b If no station broadcasting the designated program type is found
when all the frequencies have been searched, “NO PROGRAMME”
is displayed.
PTY Search
Use this function to find RDS stations broadcasting a
designated program type (PTY).
For a description of each program type, refer to “Program
Type (PTY)”.
1
Either turn <SOURCE SELECT> or press [TUNER]
(AMP mode) to select “TUNER”.
2
To operate using the main remote control unit, set the
remote control unit to the TUNER ( ) mode.
(vpage 51 “Remote Control Unit Operations”)
3
Press [SEARCH] to select “TP”.
4
Press [CHANNEL].
TP search begins automatically.
b If no TP station is found with the above operation, all the reception
bands are searched.
b The station name is displayed on the display after searching
stops.
5
To continue searching, repeat steps 2 to 3.
b If no other TP station is found when all the frequencies have been
searched, “NO PROGRAMME” is displayed.
TP Search
Use this function to find RDS stations broadcasting traffic
programs (TP stations).
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
<SOURCE SELECT>
ENTER
uiop
<ON/STANDBY>
[SEARCH]
uiop
[
CHANNEL
]
[ TU]
[TUNER]
ENTER
(AMP mode)
Playback
( mode)
[8],
[9],
[6],
[7],
[1], [2]
[ iPod]
[iPod]
[
CHANNEL
+/–]
[
SEARCH
]
ENTER
uiop
(AMP mode)
1.AVR2808E2_ENG.indd 50 2007/09/28 11:41:39